laurenmier

mhoellwarth

Hook cover for fishing lure in two sizes.&nbsp;Easy to put on with pressfit and easy to remove.

Fishing lure hook cover

fishing

Celestin

Here is the semi-automatic cotton swab dispenser!&nbsp;Easy to print and use, it's just what you need to add some style to your bathroom.&nbsp;For this, you only need :<ul><li>cotton swabs</li><li>The three printing files.</li></ul>Nothing simpler, and if you want, some pebbles and sand to weigh down the base with a little glue.&nbsp;You will only need supports for the box; the rest can be done without them. As for assembly, it's quite simple. You place the mechanism inside the box with the notches; you might need to apply a bit of force. Then, you fill it with sand and close it with the lid, adding a bit of glue. Next, you place the cotton swabs on the top (make sure to place them properly for smooth operation). Finally, you close it up, and there you go!&nbsp;Then, to retrieve them, simply lift the box and place it back, and voila, you're all set!&nbsp;V2 25/03/2024 I have reworked the lid so that the cotton swabs fit better. Additionally, I realized that the box had not been modeled correctly, so it is now easier to put the lid on, and the mechanism is higher to retrieve the cotton swabs. Let me know if this is good now

Q-tip dispenser (cotton swab)

home

royeiror

My nieces asked for more Lucky 13 dummies and I wanted to design some accessories for them, and my previous model was not very good looking, so I went and found a better hard hat (https://grabcad.com/library/hard-hat-fakey) that I couldn't set as a remix. So here is, a new and better version of the Lucky 13 Dummy hard hat.

Lucky 13 Dummy Hard Hat

lucky 13

dfreshkremer

Gridfinity baseplates with a ½ width Row. Gridfinity uses 42mm x 42mm grids. The ½ grid is 21x42mm. Good for odd sized drawers when you don't want an empty space or spacers. If you search for ½ grid bins, you can find many options (message me if you can't find it).&nbsp;

Fractional Gridfinity

gridfinity 

3D design shop

I added a side handle to easily flip it upside down into the trash.&nbsp;Width 133 mm. length 254 mm.&nbsp;You should also print this here <a href="https://makerworld.com/en/models/62345#profileId-66239" rel="nofollow"> https://makerworld.com/en/models/62345#profileId-66239</a>

fishing

home

lucky 13

gridfinity

A1 accessories