laurarusso152

finniminni

This set of boxes allows you to store your batteries in a nice and clean way, the boxes are 68mm by 68mm and can hold 16 AA, 25 AAA or 6 9V batteries. I also designed boxes for coin cells and empty batteries, both without dividers.The boxes come with nice labels that can be printed with any multicolor printing system. All you have to do is combine the box with the text model and set the text model to a different color in your slicer. If your printer does not support multicolor, you can also print the boxes with the labels engraved. Printing single color is also much faster because the printer does not have to switch filaments.You can use the base plates to keep the boxes in place when you put them on your shelf.If you have any feedback or feature requests, I would love to hear from you.

Stackable Battery Organizer

The Dragons Den

Crested Gecko was test printed down to 50%. &nbsp;10% infill3 to 4 lines .1 or .2 height No support Print in place. Print with raft or brim if doesn't stick.&nbsp;Please feel free to post pics of your makes. I would love to see them. &nbsp;If you would like to sell the prints join us on Tribes or Patreon for a seller's permit. &nbsp;Copyright:All The Dragons Dens designs are protected by the Copyright Law. By purchasing, you do not have the right to sell any digital files or printed models.The Digital files are never to be re-sold, shared, or given away.&nbsp;To legally sell the printed models, you can get my permission by joining our community- <a target="_blank" href="http://patreon.com/TheDragonsDen411" rel="nofollow noopener">patreon.com/TheDragonsDen411</a>&nbsp;You can join The Dragon's Den Discord to exchange with me and the community. <a target="_blank" href="http://discord.gg/k2KFnXNuBV" rel="nofollow noopener">discord.gg/k2KFnXNuBV</a>

Crested Gecko

Animals

253Bigfoot

This is a clone of the Katsunou cheese puzzle by Hanayama. The puzzle is rather difficult to find for sale outside of Japan, so I thought I would make my own version. You can swap out the tray, mouse, or cheese set (but not individual cheese pieces) with the original puzzle.

Katsunou cheese puzzle by Hanayama

Games

Cory Isakson

Celebrating meeples with various identities. These key fobs are perfects for gifts, pride fests, and every day!I am sharing the design and I hope that you will use them to spread joy, hope and love. Give them away generously!&nbsp;To achieve the colors add a pause and color change at the following layers. Rainbow - every 1.8mm Trans - every 2mm Bi - 4mm, 6mm Non-Binary - every 2.6mm Pansexual - every 3.4mm (new 6/23/2023)&nbsp;Size: 30mm x 30mm x 10mm (bi, trans), 10.4mm (non-binary), 10.8mm (rainbow), 10.2mm (pan)&nbsp;Included .3mf files with layer and color changes preset for Bambu AMS. For the 6 color rainbow meeple, just change out the red for blue and the orange for purple after the red and orange layers are finished and before the blue and purple layers. A Pause has been added during the Yellow print so you don't forget. to remove the Red and Organe. I use these keys rings: <a target="_blank" href="https://www.amazon.com/KINGFOREST-100PCS-Split-Silver-Connector/dp/B085Y9T4SZ" rel="nofollow noopener">https://www.amazon.com/KINGFOREST-100PCS-Split-Silver-Connector/dp/B085Y9T4SZ</a>

Meeple Keyfob - Rainbow

Keychains and toys

Vinrisa

Shared the updated version with sligtly bigger magnet clearance.&nbsp;"Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment is also considerably deeper.DescriptionI've designed a dice tower that also doubles as storage for your dice and a single mini, perfect for Dungeons and Dragons and other tabletop RPGs. I've built in a knurled ring around the bottom to easily rotate the inner tower to expose the opening/exit to the tower, the mini storage compartment, or seal up the box.Print SettingsSTLs are oriented in the optimal way for printing. I printed in PLA with .1mm layer height, 15% infill, and 2 perimeters.Depending on the cooling capabilities of your printer, this model should be printable without supports (especially at .1mm). If you're having trouble, consider using paint on supports in PrusaSlicer to address the problem areas (and minimize material waste and post processing time). Optionally, you can glue in 4x 6mmx3mm neodymium magnets to help the tower to snap in to place in optimal positions: storage, dice rolling, and allowing access to the storage compartment for your mini.Alternate Outer SleevesI've provided alternate outer sleeves for the dice tower:<ul><li>bars</li><li>birds</li><li>bricks</li><li>diamonds</li><li>hexagons</li><li>hexagons (denser mesh)</li><li>hexagons (space amoeba)</li><li>hearts</li><li>solid</li></ul>Update April 10th 2023Based on feedback from users struggling to get the magnets into the holes, I've increased the clearance to 6.2mm. All new files are Updated Files directory. I've moved the original uploads to a new directory called Original Files (out of precaution since I'm not sure what happens to my model stats if I delete them.)"

Contemporary Dice Tower/Storage v2

Maty505

articulated dragon model. resize for your needs.

Articulated Crystal Dragon

Dragons

3D Art

Schöner Auffangbehälter für Filament abfällepassen zum Riser Superstructure. <a target="_blank" href="https://makerworld.com/en/models/201705?from=search#profileId-222087" rel="nofollow noopener">https://makerworld.com/en/models/201705?from=search#profileId-222087</a>&nbsp;Viel Spaß damit :)

New

Animals

Games

Keychains and toys

DND

Dragons

P1S accessories