laughingmau

Syxiaolu94

2024.05.15 更新版/Updated version on May 15th, 2024<a target="_blank" href="https://makerworld.com/zh/models/464371#profileId-373003" rel="nofollow noopener">https://makerworld.com/zh/models/464371#profileId-373003</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168710/design/2024-05-15_d2bfa0c3ebf7e.jpg"></figure>----------------------------------------------------------------------------------------------------------------0.2层高 填充 10% 螺旋填充 无支撑打印0.2 layer height filled with 10% spiral filling, unsupported printing  缩小尺寸避免悬垂可以适当调整外墙打印速度60-90区间最佳。Reducing the size to avoid overhanging can be adjusted appropriately. The best printing speed for the exterior wall is in the 60-90 range  Dragon ornaments&nbsp;以下为 降速90外墙效果（模型缩小了45%）The following is the 90 degree reduction in exterior wall effect (the model has been reduced by 45%)&nbsp;&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168710/design/2024-04-02_1aa5f28215cc5.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168710/design/2024-04-02_52ca5caa276aa.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168710/design/2024-04-02_599bf96d64e8d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000168710/design/2024-04-02_0234c012cac0d.jpg"></figure>

Dragon ornaments

公仔

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

The Organizer

收纳

JAMMED

<ul><li>I wanted a clean and minimal looking panel mount for standard XT60 connectors. This is a basic and clean design utilizing 2 M4 bolts and nuts. simply cut the hole and install.</li><li>NOTE: The fitment of the connector and bolt holes are very tight, max diameter of bolt head is 8mm and connector is almost the exact dimensions, so it may need to be lightly pressed in to fully seat, a simple drop or 2 of super glue will keep it in place when in use.</li><li><a target="_blank" href="https://www.amazon.com/JIANNIU-Connector-Suitable-Control-Aircraft/dp/B09FYVHJDX/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.9e5188ef-9cc8-48bb-b834-24761033aedf%3Aamzn1.sym.9e5188ef-9cc8-48bb-b834-24761033aedf&crid=2BVG4GLLA32L3&cv_ct_cx=xt60+connector&keywords=xt60+connector&pd_rd_i=B09FYVHJDX&pd_rd_r=7d0c1451-1964-468b-87a4-7376cdbcc8ae&pd_rd_w=XEYaI&pd_rd_wg=UNSVg&pf_rd_p=9e5188ef-9cc8-48bb-b834-24761033aedf&pf_rd_r=W1RBT3AS888FJB63EZQP&qid=1700889726&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=xt60+connecto%2Caps%2C225&sr=1-4-364cf978-ce2a-480a-9bb0-bdb96faa0f61-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1" rel="nofollow noopener">Link to the connectors they are modeled to fit.</a></li></ul>&nbsp;

XT60 Panel Mount

电子

CCFDIY

伸缩唐横刀（Telescopic Tang horizontal knife）

伸缩唐横刀（Telescopic Tang horizontal knife）

玩具

thrutheframe

<ul><li>Please read the instruction guide below. </li><li>download the 3mf file if you are using a Bambu printer.</li><li>I do my best to double-check and test the print profiles I created. Therefore, I will only take feedback and update for those profiles. I cannot vouch for profiles uploaded by others, so please do due diligence.</li></ul>&nbsp;This is the third of three designs by Thrutheframe for A1 mini. The 3 essential printable accessories that you will need for your new printer. <ol><li><a target="_blank" href="https://makerworld.com/en/models/15603#profileId-15023" rel="nofollow noopener">A1 mini Poop Management System</a></li><li><a target="_blank" href="https://makerworld.com/de/models/28311#profileId-24696" rel="nofollow noopener">A1 mini Build Plate Stand</a></li><li>A1 mini Scraper and Stylus Holder</li></ol>While the hardware for all 3 builds can be self-sourced, I am working with <a target="_blank" href="https://veetec3d.etsy.com/listing/1583763119/a1-mini-accessories-hardware-kit" rel="nofollow noopener">Veetec3D to offer an A1 mini Hardware Kit</a> for all the 3 builds above. It will include the 6x3mm magnets, M3 screws, VHB, thin double-sided tapes, and pre-cut self-adhesive anti-slip pads. Printed parts are not included. &nbsp;The price is 10€ with tracked shipping at 5€, making the total cost at 15€. We try our best to keep the pricing affordable for everyone to have easy access to the required hardware for all 3 builds. In addition, parts and labor are sourced within EU. If you like the designs by ThrutheFrame and wish to support his projects, do consider buying this kit. The royalty will go towards funding project consumables ie. filaments, materials, electricity, coffee, time, and my brain cells. &nbsp;<figure class="image image_resized" style="width:90%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108154/2023-09-29_7ec42bbfa53b1.jpg"></figure>&nbsp;<h3>INTRODUCTION</h3>The touch screen for the A1 mini is small and my adult fingers tend to select the wrong option. I needed to use a stylus, but it keeps going missing. So I designed a holder that is attached to the right side of the printer. It also holds the <a target="_blank" href="https://makerworld.com/de/models/12702#profileId-12704" rel="nofollow noopener">Bambu Scraper Grip</a> which is another important tool that is used regularly. &nbsp;As the A1 mini may be the user's first 3D printer, I set up a few parameters when designing this holder:<ul><li>Aesthetically pleasing (to me), Easy to print/assemble and Fun to use. </li><li>Optimize print time and filament usage</li><li>Must fit onto the A1 build plate of 180x180x180mm</li><li>Minimal or no support needed</li><li>Printed in PLA, PLA+ or PLA pro</li></ul>There is only 1 part to print, and a single VHB tape is used to attach it to the A1 mini. Optionally, 6x3mm magnets are used to grip onto the blade for added stability during printing. <figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108154/2023-09-29_de162ae33e4e5.png"></figure>&nbsp;<h3>BOM</h3><ol><li>1mm VHB tape (10x20mm) - 1 pcs</li><li>Ø6x3 magnets - 2pcs (optional)</li><li>Stylus. This is one of those that I got from <a target="_blank" href="https://www.aliexpress.com/item/1005005120676155.html?spm=a2g0o.productlist.main.7.789cMpm2Mpm2VQ&algo_pvid=f833ee53-9f4c-4387-99e9-ce76e81f19d2&algo_exp_id=f833ee53-9f4c-4387-99e9-ce76e81f19d2-3&pdp_npi=4%40dis%21SGD%216.52%212.61%21%21%214.62%21%21%402151e66216974668056006015efb67%2112000031739088518%21sea%21SG%21828882876%21&curPageLogUid=42yXLBSREAOQ" rel="nofollow noopener">Aliexpress</a> (not affiliated link)</li></ol>&nbsp;<h3>INSTRUCTIONS</h3><ul><li>Download the 3mf file. The settings are prepared for printing PLA on an A1 mini. If you are printing on a different printer, please make the necessary changes to the settings. </li><li>I designed the parts based on 0.4mm nozzle and 0.2mm layer height. Print in 0.2mm layer height for accuracy. </li><li>Enable “Detect thin wall” as there are 2 walls that are 0.4mm thick. </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108154/2023-09-29_036884bd4a52d.png"></figure>&nbsp;<ul><li>Press fit the Ø6x3mm magnets into the front holes of the holder. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity of all the magnet are facing in the same direction. </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108154/2023-09-29_639e8ea912c7d.png"></figure><ul><li>Paste the VHB tape and attach the holder to the right side of the printer, beside the touch screen.</li></ul><figure class="image image_resized" style="width:50.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108154/2023-09-29_1634e730e903b.png"></figure>&nbsp;<figure class="image image_resized" style="width:50.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108154/2023-09-29_7431ee3218b5.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108154/2023-09-29_23c8c8f1cc259.jpg"></figure><figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/108154/2023-09-29_744d70f81b14.jpg"></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like my designs and wish to contribute to my coffee addiction & help fund the filaments and materials needed for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. &nbsp;Another way is to purchase the kit (TBA) from my vendor, we try to make it affordable and a small amount goes to supporting this project in terms of development consumables ( filaments, electricity, coffee, time and my brain cells) &nbsp;<h3>Caveat</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion. &nbsp;

公仔

收纳

电子

玩具

拓竹配件