labra.research

I found the original Clips would snap and fall into the resin tank, not ideal if this happens during a print.&nbsp;I have improved the model hopefully stopping it from snapping, printed in PETG I have only done a couple prints so please let me know if you experience any issues.&nbsp;Print at 50% - 100% infill&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/albionrapture" rel="nofollow noopener">Buy Me A Coffee</a>

Elegoo Saturn Vat Warmer Fermentation Belt Clips

resin tools

tools

FilliFuu

Flexi steampunk dragon featuring my new experimental articulated joints as seen on my latest model releases.&nbsp;A highly detailed model where the joints can be clicked into position, with added articulated arms and wings. The ball sockets on the links throughout the dragons body can be clicked to maintain stable positions if desired, useful for posing of the model and to give the standard articulated design commonly seem an added twist.&nbsp;Due to the force required to click the joints it recommended to avoid using brittle filaments such as silk if you intend to use the joining function. I have included an stl file containing just the joints to quick print the links if you are unsure if your filament is strong enough for the design.&nbsp;Model is completely print in place supports aren't required on the body or wings however it's more suitable to uses supports on the wings only, I have successfully printed without supports for the wings with just an increased size brim but it's safer to print with to avoid any failures towards the end of the print.&nbsp;Wall size is fine at the standard 0.42, i ran the walls at 90 with gyroid infill with 100% success, tested with many filaments and sizes. (silk is too weak when assembling the joints typically) and brim on.#&nbsp;Can be scaled in size up or down. If scaling down the smallest recommended size would be 75 percent maximum to ensure the joints still work. If scaling up the limit should be your machines full bed capacity, and of course a larger print will mean a stronger model.&nbsp;Any questions just ask and share if you enjoy the print.

Steampunk Flexi Dragon

toys

standitupstore

A model of funny glasses for celebrating the arrival of the new year 2024<ol><li>Remove temple brims and clean the edges.</li><li>Bend the front frame a bit using hot water (or heat gun) and coffee saucer. Hot tap water was sufficient in my case.</li><li>Remove small support block from the temples (inside joint).</li><li>Try to insert piece of filament into the holes. The holes may probably need to be enlarged.</li><li>Slide the temples onto the frame and insert the filament.</li><li>Trim the end of the filament.</li><li>Burn ends with something hot.</li><li>Enjoy the party ;)</li></ol>

resin tools

tools

toys

Party supplies