kyozezhao

Make-A-Print246

Update 15.12.2023: I've added a few new head variants (Smile Eyes, X-X Eyes, Heart Eyes) and a new hand variant (middle finger) has been added to the STL data. Have fun :) &nbsp;**********&nbsp;Here you can find the new version of the (Easy-to-Print) ETP-Bot. The action figure can be printed entirely from PLA, and the parts are very stable even when made from PLA material thanks to the alignment of the print lines. The individual parts are assembled by hand - see the PDF drawing and parts list.<figure class="image"><img src="https://media.printables.com/media/prints/672598/rich_content/9ebcd2e5-5fc1-4a82-8923-a14e1161723b/thumbs/cover/800x627/png/drawing.webp"></figure>The figure is fully movable and can be extended as needed.Please leave your feedback. I would be happy to make further improvements to the ETP bot.Have fun printing. best regards Alexander Make-A-Print

ETP-Bot V2 - Action Figure - Easy to Print with PLA

玩具

3DPODesigns

UPDATE: Per requests in the comments, I've added a way to add weight to the Hex Paper Towel holder if you find it necessary. You do NOT need to reprint the paper towel holder itself. Simply print the “Hex Paper Towel Holder Plug” profile, fill the hollow portion of the paper towel base with sand/dirt/or weighted material of your choice and press fit the plug into the hollow hole in the base(I was able to add 150 grams of sand to mine). Make sure you leave enough room to push the plug down far enough to sit flat. I've included a small grip on the plug for ease of guidance, as well as removal with pliers if you ever feel the need. From my testing it does not need glue, but if you want it 100% permanent, please add a dab to the sides of the plug before inserting. Pictured below is the plug assembly,<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381832/2023-12-16_d456b79522b16.png"></figure><ul><li>This is a beautiful, functional, low filament using paper towel holder I designed for my own home. Using hexagons I've made this paper towel holder both strong and light using only 135 grams of filament and NO supports!</li></ul>&nbsp;<ul><li>Specifically sized to be printable on the A1 Mini!</li></ul>&nbsp;<ul><li>Keep in mind this model is again, light, so you may need to hold it while removing a paper towel. However, I found with even my own metal holder at home I still had to do that 90% of the time, so the filament savings seemed like a worthy trade off.</li></ul>&nbsp;<ul><li>This paper towel holder should fit most small to large rolls (though I've only tested a few I have access to)</li></ul>&nbsp;<ul><li>I've included both Default Speeds and Normal profiles as my testing with PLA at Default Speed settings was great, but if you want to print in PETG it can have flow issues, so just make sure your flow rates are tuned if using the fast profile. I strongly urge you to use the normal profile if you are unsure of your flow rates. I do not have a tuned profile for A1 mini, but I've included a fast profile that should work fine as long as your flow rates are tuned. Please let me know if you have any issues with it (I printed both the fast and normal profiles a total of 5 times each, but your experience matters!) and feel free to upload your own A1 profiles!</li></ul>&nbsp;<ul><li>If you enjoy this model please toss it a like!</li></ul>&nbsp;&nbsp;

Hex Paper Towel Holder

生活工具

R3DPanda

I felt obligated to improve and redesign the model. This version fixes all the small problems that the first version had and makes pulling out the PTFE tubes super easy. Additions:+Slimmer. Doesn't collide with the other tubes. +No more slipping off after removing a tube. +Looser fit. Doesn't squeeze the tubes. +Better design with less sharp edges.

PTFE Tube Remover V2.1 for the A1

小工具

Poop pop stop for A1 V2.0 (nozzle cleaner)

Poop pop stop for A1(nozzle cleaner)