kyle_has_hobbies

angrelou

update 02/11/2024I uploaded a new model witch solves the problem of the hook breaking when force is applied.Thanks you all for your comments, making this model better for everyone. Download the V 2.0 &nbsp;Lately, I&#39;ve noticed that they always upload the same STL file to all platforms and always encounter the same problem.I took it upon myself to design a new case that solves the issue all previous models had, which is that they all open too easily.After several failed attempts, I finally managed to make everything fit perfectly without the need for supports.At the moment, i only created 3 models, but i will be uploading more models soonEnjoy the 3D printAs always, have fun, and I&#39;ll be uploading more things soon.(I recommend using pla+)If you liked the design, check out my profile and subscribe, you won&#39;t regret it.

Toothbrush Travel Case

travel

IndomReps

Be sure to read the different applications of the different tool holders below to make sure you are printing the correct model for your application. Please be aware that your filament brand, age, and print profile can affect the fit of your printed parts, if you have significant issues with fit consider trying a test print with a different roll or brand of filament.&nbsp;*** UPDATE 1 *** 2/14/24&nbsp;Received some feed back that the tool mounts will not work with tools that have the belt clips installed on them. I never considered this in the original design since I typically take them off my tools. I have made 2 options available so those of you that use the belt clips can still use these mounts.&nbsp;The first option I simply increased the thickness of the mount and then hollowed out the back a bit to try and keep the amount of material used down a bit. I designed it in a way that it can be printed without supports and a little bit of bridging.&nbsp;The second option is a simple spacer that is printed separately and then placed behind the original tool mount. This is a good option for those of you who have already printed the original as it has a recess in so that the original mount can sit down in to keep the screw holes aligned. I intentionally designed this to be on the tighter side for fit so mileage may vary depending on what brand you use and your filament calibration. Comment if you do have fitment issues of the spacers so I know if I need to make more updates. &nbsp;Please note I have not verified this with every Dewalt tool available.                                                        &nbsp;Tool and Battery mounts for Dewalt 20v tools&nbsp;These things are nearly universal and will fit a good amount of the Dewalt 20v tools and is universal for all 20v batteries. They are also quite strong and have no issues supporting the weight of the ½" impact drivers weight and then some.&nbsp;Attach them to whatever surface you want with two #8 screws. Tool mounts are best used as under mount but they can certainly be mounted horizontally if it suites your application. The battery mounts can be mounted in whatever orientation you want as they use the batteries locking mechanism to hold the batteries in place.&nbsp;There are 3 different print models for the tool mounts, choose which one best suits your needs.&nbsp;Dewalt Tool Holder: Base file, print these for tools that do not have the belt clips.&nbsp;Dewalt Tool Holder - Integrated Belt Clip Spacer: print these for tools that you want to consistently hang tools from that have belt clips on them. The skid plate is a bit thicker to allow clearance and I have hollowed out the back of it a bit to save on material usage. No support is needed for this print.&nbsp;Dewalt Tool Holder - Belt Clip Spacer: This is for previous users who printed the original and would like to be able to able to mount their tools that have belt clips, or users that want a more modular function.&nbsp;I've printed these in normal PLA and didn't have any strength issues but you can use PETG or Pro PLA if you want. If you want to use these in a work truck or something that can get really hot in warm weather you should probably use ABS otherwise its probably overkill.&nbsp;Default profile uses .2 layer height but bump it up for a faster print as layer height really doesn't matter for these. I've even printed these on ludicrous speed and had them still fit fine.

DeWalt 20V - Tool and Battery Mounts

storage

Peter the printer

All the models are set to 4 Colours, perfect for AMS&nbsp;All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface&nbsp;Recommended height layer 0.28mm. With this height, there are 2 colored layers, 7 base color layer and other 2 multicolor&nbsp;Do you want more one piece keychain?&nbsp;<a target="_blank" href="https://makerworld.com/en/models/396294" rel="nofollow noopener">https://makerworld.com/en/models/396294</a><figure class="image"><a href="https://makerworld.com/en/models/396294" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000456626/design/2024-05-07_6119835da1e59.jpeg"></a></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/457542" rel="nofollow noopener">https://makerworld.com/en/models/457542</a><figure class="image"></figure>

One Piece Keychain - Usopp, Nami, Robin, Chopper

Powerpill.prints

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-03_5683da9e2fb0f.jpg"></figure>This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 4 Colours! Just load your filament, slice and go! This first pack includes the following Pokémon: Charizard, Pikachu, Snorlax, Gengar, and Mewtwo! Check out my other Pokemon Packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/234438#profileId-250977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-03-04_2b0f305261921.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/234438#profileId-250977" rel="nofollow noopener">Pokemon Keychain Pack #6</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/253647#profileId-270086" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-06-18_c11965538aa41.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/253647#profileId-270086" rel="nofollow noopener">Pokemon Keychain Pack #7</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/472759#profileId-382643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-06-18_7037cee7c2094.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener">Pokemon Keychain Pack #8</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/503298#profileId-418741" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-06-18_ee2dfb693b7bd.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/503298#profileId-418741" rel="nofollow noopener">Pokemon Keychain Pack #9</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-15_69944c783c556.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, take a small drill bit to the hole to add an extra bit of wiggle room.&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-15_a806c1738eb0e.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!&nbsp;<figure class="image image_resized" style="width: 41.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-03_1602f737e57a5.gif"></figure>&nbsp;If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-01-03_6a268482b4d6a.jpg"></figure>This is my first time uploading a model set to Makerworld, so if you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print their very best! Like this pack? Check out my Super Mario 3, Undertale, and Pokemon Keychain Packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_1b51dac6130d8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_3888685c1d948.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_231c0706c647e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/442832#profileId-348820" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_6d105be145fb8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/442832#profileId-348820" rel="nofollow noopener">Pac-Man Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/399835#profileId-301320" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_8201d7f9605df.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/399835#profileId-301320" rel="nofollow noopener">Yoshi Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121800/design/2024-05-17_7b7272f64e966.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Pokemon Keychain Pack #1 - Pikachu, Charizard

pokemon 

SCprintdustries

Included is the STEP file to modify the model how you want for your preferred light method. &nbsp;Backplate is in the Raw Files section.&nbsp;The holes in the back are for USBC port and an on off switch linked here:&nbsp;USBC: <a target="_blank" href="https://a.aliexpress.com/_mPzo30o" rel="nofollow noopener">https://a.aliexpress.com/_mPzo30o</a>&nbsp;On/OFF Switch: <a target="_blank" href="https://a.aliexpress.com/_msxT1XO" rel="nofollow noopener">https://a.aliexpress.com/_msxT1XO</a>&nbsp;LED's: <a target="_blank" href="https://a.aliexpress.com/_m0f9INq" rel="nofollow noopener">https://a.aliexpress.com/_m0f9INq</a>

Unicorn Lightbox

lightbox

潦草小狗爱吃雪糕

This is a mold for making spinning top from PLA filament purge. The tops made with this mold are very colorful and spin well. I printed the mold with PETG at 100% infill and did not need to use supports (PC might work even better).&nbsp;What you will need:<ul><li>An unused oven</li><li>A silicone mat (it&#39;s easier to flip and roll the melted PLA into a ball on a silicone mat than on a metal baking tray)</li><li>PLA filament purge</li><li>A 3M respirator or N95 mask (the fumes from melting PLA in the oven are stronger, so please protect yourself)</li><li>Work gloves</li><li>Tongs</li><li>Pliers</li><li>A digital scale</li></ul>Process：1. Accurately weigh 6g of PLA filament purge and place it in the oven.Preheat the oven to 200-230°C and heat the filament purge for approximately 5 minutes.2. Use tongs and pliers to shape the melted PLA into a ball. Evenly folded patterns will look better.3. Place the shaped plastic into the mold and press the mold firmly.4. After approximately 3 minutes, open the mold and remove the top. If the top is difficult to remove, use pliers to take it out.「Twisting and shaking the mold after it has cooled completely can aid in part release. I recently tried using a mold release agent (spray), and it has been very effective in ensuring smooth part separation.20240512」（translate from Google Gemini）&nbsp;&nbsp;这是一个使用PLA耗材废料制作陀螺的模具，制作出的陀螺颜色比较漂亮，旋转的很好。我用PETG 100%填充来打印模具，无需添加支撑（PC可能效果会更好）。&nbsp;你需要：一个闲置的烤箱，一个硅胶垫（需要把熔化的PLA翻折并团成一团，这在金属烤盘中很难操作），PLA耗材废料，3M防毒面具或N95口罩（在烤箱中熔化PLA产生的气味更大，请做好防护），工作手套，取盘夹，钳子，电子秤。&nbsp;压模步骤：&nbsp;1，将 6g（请准确称重）PLA耗材废料放入烤箱中，200～230℃加热约5分钟（烤箱需预热）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_df4dbe446d418.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_74bd4a7599ef7.jpg">&nbsp;&nbsp;2，用取盘夹和钳子把熔化的PLA团成一团（翻折均匀的纹理会更漂亮）<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_31b36cc45d107.jpg"></figure>&nbsp;&nbsp;3，把团好的塑料放入模具中，用力挤压模具。&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_75a96c8b0fc52.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_06f1d6fa28797.jpg"></figure>&nbsp;&nbsp;4，大约3分钟以后打开模具取出陀螺。如果脱模困难可以用钳子把陀螺取出。<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437241/design/2024-04-21_07f0433aa2577.jpg">&nbsp;&nbsp;「充分冷却后扭转并晃动模具将有助于脱模。我最近尝试使用脱模剂（喷雾），它很有效，可以确保顺利脱模。20240512」&nbsp;

Spinning top mold   陀螺模具

poop

soukup273

A great idea for a international women&#39;s day gift!&nbsp;a beautiful rose with a stem that is suitable for decoration or as a gift. print the parts separately. print the flower in vase/spiral mode.&nbsp;it is perfect for decorating the table at Christmas dinner, or also for decoration at the approaching New Year&#39;s Eve party! suitable as a decoration for any other party or birthday party :)<h2>!assembly requires glue, ideally instant glue or other plastic glue!</h2>&nbsp;It looks beautiful as a bouquet in combination with my other models!with Tulip:<a target="_blank" href="https://makerworld.com/de/models/94713#profileId-101302" rel="nofollow noopener">https://makerworld.com/de/models/94713#profileId-101302</a>&nbsp;with Rose:<a target="_blank" href="https://makerworld.com/de/models/89698#profileId-96027" rel="nofollow noopener">https://makerworld.com/de/models/89698#profileId-96027</a>&nbsp;with Deffodil:<a target="_blank" href="https://makerworld.com/de/models/94751#profileId-101334" rel="nofollow noopener">https://makerworld.com/de/models/94751#profileId-101334</a>&nbsp;&nbsp;the model is completely a remake from the beginning based on the models created by lytta and Grafit&nbsp;

travel

storage

key

pokemon

lightbox

poop

presents