the print came out fine, clean with very little stringing using translucent PETG-HF. its not really drying my desiccant well though so not sure about its function. I've filled two baskets on two separate polydryers and they've been running for 15 hours so far and the desiccant is still dark and not drying out.

perfect fit, clean print, sturdy. not worried about the firearm tipping even when loaded making it more top heavy. will be printing a second to give to a buddy who also has a PS90.

I found 3 models including this one a candidates to fill my need. this one checked all the boxes. wide base to apply double sided tape, and the light switch structure so I can leave all components of the Lumen Aurora intact and not risk losing pieces. the other models did one or the other, but this accomplished both.

I used the print profile with gyroid infill and top layer ironing. printed in Dark Gray Petg-hf. Came out really well, clean simple design and sturdy. Im placing the top glass on the right side of the printer so I would have liked the Bambu logo to be on the right side rather than left, but thats just nit picking. if the designer chooses to publish a "left side and right side" update I would definitely reprint.

prints clean, simple functional design that lets air flow around hygrometer to give accurate readings.

perfect fit, easy install. useful to see temp/humidity. have a hygrometer at the front and rear of the p1s.

print profile worked well, printed easy. Just wish the feet were easier to remove from the double barrel mod for when I dont want to use the vent adapters. need to use plyers to pull out the snap fit adapters.

I never had issues aligning my build plate so I wasn't sure I was going to notice a benefit from this. but dang, does this make it even easier. simple functional design, serves its purpose. no reason not to print these.

great design, printed 12 of these for cereal box dry boxes. the filament tiles fit a loose and dont stay in place, but the main body and the desiccant holder all print well. printed the body in Jade White PLA basic, and the desiccant holders in translucent PETG-HF.

im not sure if im benefiting from the redirected airflow, I really didn't have any issues before that some others seem to have. print profile works well, prints clean and easy, installs in the printer well.

simple functional design, prints clean and easy.

Realized I didn't rate this, so giving it a rating. Really enjoyed this print, gifting this to my father, who plays Gibson's, for his birthday. Colors I used; Jade White PLA basic, Black PLA basic, Iridium Gold Metalic PLA Metal, and Silver PLA Silk+. The only challenge I had was with the PLA silk+, specifically when printing the feet. I had printed those parts in Gray PLA basic first, and it printed just fine, but wanted the more metallic look that the Silver PLA Silk+ provides.

perfect adapter for the newer antivibration feet, installs firmly and stays in place, helps provides some support to the anti vibration feet while allowing them to function as they should.

printed well. installed easy.

printed in single color PETG-HF. printing quality came out really well, but the support structure was a huge PITA to get off. took some time and being very careful (printed 2 because I cracked the first one in half) but eventually got it all off cleanly. fits in the printer a little loose, but im not worries about it falling out or causing any other issues.