kward4

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏 ! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you want a nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !If you are unsure about bed adhesion - please use the “Mice Ears” print profile! 👌<h3>Why this Version 3.1?</h3>Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports since the beginning of 2024. That&#39;s why I have now created the new version of my AMS Protector.<h3>Does my AMS need version 3.1 or 3.0?</h3>If your AMS was delivered to you by Bambu Lab before October 2023, then just print version 3.0.If your AMS was delivered to you by Bambu Lab after October 2023, then I would simply measure the AMS Feeder Funel - see the pictures below.<h4>⚠️If the funnel diameter is about 14.3mm, then you should print <a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79088" rel="nofollow noopener">version 3.0</a>, if it is about 14.5mm, then print version 3.1👌</h4><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2024-02-13_08bb8c9fc5171.png"><figcaption>If the funnel diameter is about 14.3mm - then you should print <a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79088" rel="nofollow noopener">version 3.0</a></figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2024-02-13_d9278fcd1061b.png"><figcaption>If the funnel diameter is about 14.5mm then print version 3.1</figcaption></figure></td></tr></tbody></table></figure>Thanks to my supporters and testers <a target="_blank" href="https://makerworld.com/en/u/2843581120" rel="nofollow noopener">@linshuuyuu</a>, <a target="_blank" href="https://makerworld.com/en/u/815356263" rel="nofollow noopener">CROKOBIBI</a>, <a target="_blank" href="https://makerworld.com/en/u/4070704053" rel="nofollow noopener">@TheEngineer</a>, <a target="_blank" href="https://makerworld.com/en/u/1817999304" rel="nofollow noopener">Susi-Knalltüte</a><a target="_blank" href="https://makerworld.com/en/u/1817999304" rel="nofollow noopener">@user_1817999304, </a><a target="_blank" href="https://makerworld.com/en/u/3627188750" rel="nofollow noopener">@Encore94</a> With their great help I was able to check and improve the functionality of the version 3.1!!! 🙏❤️👍<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - what is that good for?</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are from soft plastic too) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 70.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2023-10-25_8hoqibaoyj3w.png"></figure></td><td><figure class="image image_resized" style="width: 66.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2023-10-25_u8iyxwgrbe3q.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model!) and reconstructed it so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-)&nbsp;For version 2.0 I achieved the best results with the PTFE length of 18mm. I used a replacement PTFE tube that came with my Bambu Lab X1 Carbon.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder!<h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,36 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)Take a look at the Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>&nbsp;— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000185042/design/2024-01-12_00009ce9c82bf.png"></a><figcaption>🔗<a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">Eds_3D_Shop designs on MakerWorld</a> 🔗</figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

v.3.1 Feeding Funnel Wear Protector for AMS 2024

ThisFact

<h3>Rubber band gun V2:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460974/2024-01-27_7421c4e792aa8.gif"></figure>&nbsp;A new and improved version of the previous V1 model.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460974/2024-01-27_e100cb67bf0e2.png"></figure><h3> Commercial use :</h3>Want to use it for commercial purposes? Sure, i allow it as long as you credit me as the creator.

Rubber Band Gun V2 (Print-In-Place)

Jaxel

2024-02-27: Moved the guide area a little bit to the right, so that it matches the <a target="_blank" href="https://makerworld.com/en/models/112160#profileId-120072" rel="nofollow noopener">HUB guide</a> I also made.&nbsp;NOTE: This is for the AMS BUFFER, not the AMS HUB. There is a <a target="_blank" href="https://makerworld.com/en/models/112160#profileId-120072" rel="nofollow noopener">different model for the HUB</a>.&nbsp;Another of many PTFE guides for the X1C and the AMS. This lines up the output feed.There are two versions: one standalone, and another for use with the X1C spool holder.&nbsp;You should have longer M3 screws in the accessories kit that came with your printer.If you don't have any, you can buy any generic M3 hex socket screw kit off <a target="_blank" href="https://www.amazon.com/gp/product/B0B31SC98Z" rel="nofollow noopener">Amazon</a>.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

X1C AMS Buffer Guide (output)

<h2>Milwaukee LED Light Box (V2) 💡📦</h2> It is recommended to print the BED CLEANER first!<a target="_blank" href="https://makerworld.com/en/models/78594#profileId-82864" rel="nofollow noopener">https://makerworld.com/en/models/78594#profileId-82864</a> ** USE PROVIDED PRINT PROFILES! THEY HAVESPECIFIC SETTINGS CHANGED TO CLOSE GAPSON FIRST LAYER! ** Drill hole in side or back panel (or cut in slicer) forLED strip light wire. Make sure print bed is CLEAN before printing. REMOVE PURGE LINE RIGHT WHEN THE PRINTSTARTS!! ** NOT FOR COMMERCIAL USE! **For commercial use license visit:<a target="_blank" href="https://ko-fi.com/l3dmodels" rel="nofollow noopener">https://ko-fi.com/l3dmodels</a>  KIRSTY K (3DDirectk) on Etsy does NOT have permission to sell my designs!

Milwaukee Light Box Sign

Ross3D

This is a simple wall hook that I made to hang my stuffs.&nbsp;The size is 50mm x 30mm with a screw hole of 4mm (counter sunked)&nbsp;Recommended print settings:<ul><li>0.2mm layer height</li><li>4 walls</li><li>4 top/bottom</li><li>25% Gyroid infill</li></ul>&nbsp;I can make other sizes too, just let me know if you guys need other sizes.

Simple Hook for Walls or Furniture

<h2>DeWALT LED Light Box 💡 📦</h2>It is recommended to print the BED CLEANER first!<a target="_blank" href="https://makerworld.com/en/models/78594#profileId-82864" rel="nofollow noopener">https://makerworld.com/en/models/78594#profileId-82864</a> ** USE PROVIDED PRINT PROFILES! THEY HAVESPECIFIC SETTINGS CHANGED TO CLOSE GAPSON FIRST LAYER! ** Drill hole in side or back panel (or cut in slicer) forLED strip light wire. Make sure print bed is CLEAN before printing. REMOVE PURGE LINE RIGHT WHEN THE PRINTSTARTS!! NOT FOR COMMERCIAL USE!For commercial use license visit:<a target="_blank" href="https://ko-fi.com/l3dmodels" rel="nofollow noopener">https://ko-fi.com/l3dmodels</a>

DeWALT LED Light Box

BobbyDazzler

Just a simple key hook, nothing fancy.Category: Household&nbsp;Edit: for maximum strength I recommend printing this on it's side (as opposed to on it's back with the screw holes facing the bed) so layer adhesion lines run top to bottom, this also reduces the supports required to just the fileting along one edge rather than the hook section.

Key Hook

3DMON maker

You can use some of the 1.75mm filament instead of screws to hold latches and hinges. If holes get printed somewhat tight, please use a 1.8mm drill bit or a 1.5mm hex wrench to make the holes fit.The cold white filament seems better for the logo than the natural white.Step files are also uploaded.05-03-2023 : The hole size of the latch got a little bigger.Thanks, zx82net!

Rugged Box Remix

PrintThatBoii

beautiful cat held by hands wall art you can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of 220x220mm or you can scale it for bigger bed sizes

CAT HELD BY HANDS WALL ART

Frikarte3D

NEW VERSION: <a target="_blank" href="https://makerworld.com/en/models/66639" rel="nofollow noopener">Bambulab Box with Flipped Logo</a>&nbsp;Are you a fan of Bambu Lab, the innovative company that creates 3D printing solutions and products? Do you want to store and organize your 3D printing tools and gadgets in a cool and convenient way? Then you need the Bambu Lab Box, a 3D printable model that lets you create your own custom box with the Bambu Lab logo.&nbsp;This box is a remix of the Tool Box by Yanev, but with the Bambu Lab logo on the top and a base with 6 compartments to hold your 3D printing items. It also has a latch and handles for easy opening and carrying.&nbsp;The Bambu Lab Box is compatible with all the <a target="_blank" href="https://makerworld.com/en/models/217203#profileId-236238" rel="nofollow noopener">Tool Box Bases with Compartments</a> models I designed, such as the ones with 2, 3, 4, 6, 9, 18 or 36 compartments. You can swap the base to create your own customized Bambu Lab box with different sizes and layouts. It will also be compatible with the future bases that I will design.&nbsp;If you want to avoid items shifting between compartments during transit and also optimizes the available 5L space beneath the toolbox lid you can print my <a target="_blank" href="https://than.gs/c/13653?affiliateCode=Frikarte3d" rel="nofollow noopener">Tool Box Trays</a>.&nbsp;The Bambu Lab Box is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. It is designed for an AMS (Automatic Material System) or MMU (Multi Material Unit), so you can print the top with the logo in different colors. You just need to load the top with the logo as a multipart model in the slicer and choose the filament wanted for each part. I uploaded the .3mf file sliced with Bambu Studio.&nbsp;I will also release a version with split parts for those who don’t have an AMS or MMU.&nbsp;For assembly you will need M3 screws or rods. I used 30mm length for the back and front holes and 40mm lenght for the handle. Buyed this ones: <a target="_blank" href="https://s.click.aliexpress.com/e/_DnNc7IR" rel="nofollow noopener">M3 Screws</a>&nbsp;Download the Bambu Lab Box today and show your support for Bambu Lab with this awesome box!&nbsp;ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.To sell them legally, message me so we can work out a deal.Hope you like it! Any advice, or recommendation is welcome! Happy Printing!I would be very grateful if you print it and put it on social networks to tag me at <a target="_blank" href="https://www.instagram.com/frikarte3d/" rel="nofollow noopener">@Frikarte3D</a>If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.