Cyril

Marckkill

<h4>Summary</h4>A full scale wearable model of Corvo's mask from Dishonored. The mask is a high-poly model based off of the in-game mesh.<h4>Instructions</h4>All of the parts should be printed with supports. In addition to the printed parts you will need:-Extra filament -Super glue-Paperclips (optional) -Rubber Bands (optional) -Fabric (optional) -Scissors (optional) -Gold and/or Black Paint (optional)&nbsp;To construct the model, I recommend that you download the file with the assembled mask and open it in a 3D-modelling software of your choice. You can use that model to get a better view of how the pieces fit together. Check the gallery for an image showing how to cut the fabric. The wires in the mouth are made of flexible filament.&nbsp;

Corvo's Mask (Dishonored)

todo

Asdfgasdfg

Be careful downloading prints called “Fast” etc, those might be faster but that's because of a weaker design, they are spammers just taking the original profile, lowering the integral strength to get it to print faster, and as explained below, there needs to be a balance in the force of the spring and the rubber band. Those profiles might not work as well as intended. Its just spammers racing to the bottom, give them enough attention and soon there will only be profiles with 1 wall and 2% infil thats printed in 5 minutes but falls together if you look at it long enough.&nbsp;Double action OTF fidget toy for the fidget toy design competition.&nbsp;All you need is plastic and a rubber band!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-13_2404c2f7a37e2.gif">&nbsp;If you like the idea but dislike the design bookmark the model and visit it after the competition is over and I will release all the source file so you can easily modify the body or blade/comb!&nbsp;<h2>Assembly instructions:</h2>NOTE: For the double action to work you need to have a balance between your rubber band and the springs holding the blade. You can use the strongest rubber band you can find and it wont really matter, but the switch will be harder to push. So you might want to try around with different rubber bands or different materials for the springs. If the switch is to hard for your liking, your rubber band is to strong. If the blade/comb does not fully extract or retract, your rubber band is to weak or your springs are to stiff.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=rN4wuBX-5q8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/rN4wuBX-5q8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;<h2>How it works:</h2><img src="https://makerworld.bblmw.com/makerworld/draft/234870/2023-11-18_6157ed5d0cf8b.png">

Double Action OTF Knife/Comb

done

pmorgan

This is one of a set of trays all designed to go side by side as the cut-outs on the sides align with each other and allow for easy utensil grabbing. Simply see which sizes you need to suit your needs and print that combination of trays.&nbsp;The walls are 4.25mm thick and have a bit of extra infill to make them stronger. The edges are filleted for aesthetics and to limit edge-cuts when reaching into the drawer in the dark on late night snack excursions.&nbsp;The bottom is not magnetic. Gridfinity by Zack Freedman: <a target="_blank" href="https://www.youtube.com/watch?v=ra_9zU-mnl8" rel="nofollow noopener">https://www.youtube.com/watch?v=ra_9zU-mnl8</a>

6x2x60mm Gridfinity Silverware Tray

silverware storage

Rikskeff

Twist lock container to keep your items secure, perfect in your car, bathroom or when traveling.&nbsp;The top screws and locks into place with a very satisfying click sound.&nbsp;The model has tight tolerances and might be hard to turn the first couple of times. After a few times it will run smooth.No supports needed.&nbsp;Check out the smaller version below, perfect when traveling.<a target="_blank" href="https://makerworld.com/en/models/413689#profileId-318275" rel="nofollow noopener">https://makerworld.com/en/models/413689#profileId-318275</a>&nbsp;<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000431105/design/2024-04-22_39e861264e4ea.gif"></figure>

Twist lock container | No supports

remixed by me

EEEEEE

Prints on the Bambu P1S in exactly 30 minutes with the provided 3mf file. Print in PLA with 100% infill. Be careful not to bend the wings while removing from the build plate.&nbsp;Check out v5, a biplane: https://makerworld.com/en/models/451625#profileId-358694&nbsp;Instructions:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000441352/design/a631e2e3-d7e7-4134-a565-da440a1b61a6.webp">-Once you take the glider off the build plate, flip it over(flat side facing up) and fold the two elevators up as shown above. Fold between 30 to 45 degrees, it is better to fold lower than higher.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000441352/design/28448b2f-4532-49e0-ad68-680542cabfb1.webp">-Next, fold up the 2 stabilizers exactly 90 degrees. Make sure that the weighted side of the head is facing down relative to the stabilizers and elevators.<figure class="image image_resized image-style-align-left" style="width:216.484px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000441352/design/9e8451c0-c27c-40bd-ba7c-717e3de141a6.webp"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;The glider should look similar to the image shown. To throw, hold between the wings and head of the plane. Throw it like a dart, but with less force. If the glider flies to the left or right, make sure that the stabilizers are at a 90 degree angle or manually adjust the flaps on the stabilizers. If the glider doesn&#39;t stay at the same height, lower or raise the elevators until it does consistently.

todo

done

silverware storage

remixed by me

planes