JacekKra

design3d

Desk stand for iPad / tablet with hole for charging cable and place for pen.

iPad / tablet desk stand

Gadzety

Sevro

Minimalist and useful flower vase. Put inside a small glass of water and it's ready :)Just give this minimalist vase with flowers on Valentine's Day and you are sure to make an impression.&nbsp;Three size to choose. If you need specific size, write to me and I add another size :)No glue need. Parts fit tight.&nbsp;Have fun :)&nbsp;

Minimalist flower vase

Domi

Flori_

This is a remix of a model by @EmaKralova(https://makerworld.com/en/models/224716#profileId-242637) I added different size options.The &#39;small&#39; version is the original by @EmaKralova&nbsp;Lengths:Small: ca 140mmMedium: ca 220mmLarge: ca 290mm&nbsp;Advice:The &#39;large&#39; zip tie only fits on the 265mm² build plates diagonally.&nbsp;I recommend printing with TPU&nbsp;If you just want the ‘small’ version, please check out the original design (https://makerworld.com/en/models/224716#profileId-242637)

[Remix] reusable zip tie

Narzedzia

r4nd0m42

I designed these for under my desk to help keep all those pesky cables out off the way and off the floor, I wanted something that was easy to use putting cables in and out and could also store plenty of large gauge cables.&nbsp;These clips have approximately a 30mm cross section for cables, it features a single countersunk mounting hole at the top for a up to 4mm screw and a 6.5mm hole at the bottom to fit a screw driver through for easy mounting.&nbsp;The print includes a sprue to help against warping of the small clip end.&nbsp;Print time: ~30min&nbsp;Print settings used:&nbsp;After some experimentation I recommend that the parts are printed either separately or by object so as to get best accuracy in dimensions, further it may also help to print the clip part at slower speeds again to increase accuracy.&nbsp;Brim: NoneSupport: NoneInfill: 40% Triangles (too little infill will cause clip to become too flexible)Layer height: 0.2Walls: 3Bottom Layers: 3Top Layers: 3Post Processing: Remove sprue from clip and assemble

Under Desk Cable Clip Organiser

euosJad

💧 Introducing this sleek and modern watering can!&nbsp;🌱 It&#39;s designed to be super easy to use and looks great in any space. With a capacity of about 0.5 liters, it&#39;s perfect for watering your indoor plants or small garden.&nbsp;🌼 This 3D-printable model comes in just two parts, making it a breeze to print and put together. Whether you&#39;re a gardening pro or just starting out, this watering can is a must-have for keeping your plants happy and healthy.

Watering Can

Ogrod

soarpix

<h2>Summary</h2>In this Thing I have separated the rim and tyres for my Willys Jeep, so they can be printed in different colors and materials.Original Thing: <a target="_blank" href="https://makerworld.com/en/models/433442" rel="nofollow noopener">WILLYS JEEP - Fully printable by soarpix - MakerWorld</a>

WILLYS JEEP - rims and tyres

Notyou

Small circular case that holds four MicroSD Cards and has a screw on lid.<h4>Print Settings</h4><ul><li>Rafts:</li></ul>No<ul><li>Supports:</li></ul>No<ul><li>Infill:</li></ul>10%<ul><li>Notes:</li></ul>The threads work better with smaller layer heights.

Small Screw On MicroSD Card Case

Przechowywanie

Little Mac Designs

This Spool Rack is the perfect addition to your 3d printing setup! Accepts a 1&#39;&#39; wooden dowel. The print profile allows you to choose your own infill pattern so that you can customize it to your specific style and needs! It is a fast print at only 1.5 hours on the p1s! If you are not using the print profiles provided, the way to achieve this effect is by removing all of the top and bottom layers, so that the infill will be exposed. I increased my wall count to about 7 to still have a strong part. No supports needed!

Gadzety

Domi

Narzedzia

Dom

Ogrod

RC

Przechowywanie

bambu