kpernau

Martin Kozak

<h3>Model</h3>Print profiles have been divided by color.&nbsp;<h3>Postprocessing</h3><ul><li>Remove supports (some parts have pre-modelled supports, some have slicer supports, some combination of both).</li><li>Use deburring tool to remove sacrificial bridging inside the holes.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/424155/2023-12-30_7f665c461fbba.jpg"></figure><ul><li>Please use 4pcs of M2 screws to join 50163_a (black) and 50163_b (dark grey) parts together. Inner gear must rotate freele in outer ring.</li><li>TPU beams are split into two halfs. Please gluew two and two rods together. Insert filament into center hole to reinforce the connection.</li></ul><h3>Assembly</h3><ul><li>See attached assembly guide.</li><li>Due to the printer tolerances and nature of FDM printing, sometimes you'll need to apply more strength to assemble, some parts will be little loose and need a glue to secure it in position and whole drive train will need a lubrication in order to make it work smoothly (PTFE lubrication or silicion oil in spray recommended).</li></ul>See my other upscaled creation:<ul><li><a target="_blank" href="https://makerworld.com/en/models/114353#profileId-122927" rel="nofollow noopener">https://makerworld.com/en/models/114353#profileId-122927</a></li><li><a target="_blank" href="https://makerworld.com/en/models/133466#profileId-144784" rel="nofollow noopener">https://makerworld.com/en/models/133466#profileId-144784</a></li></ul>&nbsp;

Compact Excavator 300 %

LEGO like

bounetphoto

Simple spool holder, nothing more to say about it :)I forgot, I integrated two screw holes on the feet so you can easily wall mount it.Now remixed with ball bearings: <a href="https://www.thingiverse.com/thing:2822341" rel="nofollow">https://www.thingiverse.com/thing:2822341</a><h3>Print Settings</h3>Printer Brand:PrusaPrinter: <div>i3 MK2S</div>Rafts:NoSupports: <div>No</div>Resolution:0.2 to 0.3Infill: <div>15% or more</div>Notes:Cubic infill is best for strength.Category: 3D Printer Accessories

Simple spool holder

Bambu Labs P1s

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

LEGO like

Bambu Labs P1s

Things to Make