korean.made81

Slowpoke's Workshop

Spider-man character

Toys

capsel22

Quick print of a PTFE clip which goes on the cable chain. Prevents the tube hitting the top glass or ams etc.&nbsp;Printer 0.2 layer heigh with 3 walls. Suggest printing it with PETG at minimum.&nbsp;It's designed to be tight fit. I found other designs to have either the PTFE cut out too large and the tube would come out or the lips holding the cable chain to be too small, and it clips off.&nbsp;To fit it, insert the top first onto the cable chain.

Cable Chain PTFE Clip for X1. P1P, P1S 

Bambu Accessories

DonMatis

Filament painting for The Hulk fansTried a bit different colour combination to reflect a little of Hulk colours. In this specific painting is important to chose a white with high transmission distance.&nbsp;Hope you like it and looking forward for your makes.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA Overture Black</li><li>PLA PolyTerra Charcoal Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Olive Green</li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #8 (0.72mm) swap to Charcoal Black</li><li>At layer #10 (0.88mm) swap to Cement Gray</li><li>At layer #12 (1.04mm) swap to Gray</li><li>At layer #14 (1.2mm) swap to Olive Green</li><li>At layer #18 (1.52mm) swap to White for the rest.</li></ul>

The Hulk

Hueforge

Jorge Rui

<blockquote>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;For a small help use this affiliate link to buy fillament, it will cost you the same. Thanks !<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Filaments used on this project</a><a target="_blank" href="https://shrsl.com/4cpox" rel="nofollow noopener">Complete hotend for the X series</a><a target="_blank" href="https://shrsl.com/4cpoy" rel="nofollow noopener">Hotend with nozzle X series</a><a target="_blank" href="https://shrsl.com/4cpov" rel="nofollow noopener">Other Accessories</a>&nbsp;</blockquote><h2>A note about this model</h2>There is a nes and updated version of this, with a modular approach, based on my <a target="_blank" href="https://makerworld.com/en/models/13415?profileId=13268" rel="nofollow noopener">MMSS</a>, and is available <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">here</a>.&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_37429ce72890f.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b69a4d08ab4d8.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_8fb4405968195.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_de4c9a7b9700e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_97413a6c36b6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b12c00384f143.jpg"></figure></td></tr></tbody></table></figure>Nevertheless, this one was my first take on this, and I think it’s nice for you to have something to store your tools and accessories ;)&nbsp;This is a debugged version of the initial release. It presents all the updates and some improvements that have been implemented in the meantime. This version will be updated over time.The entire production sequence was updated in order to translate the comments that were made over time by members. However, you are free to define your own printing strategy. The colored areas are already found as separate objects, therefore it is not necessary to use the painting tool, an exception for the areas where the accessories come reside; in this situation, I chose not to create different bodies, as it is my opinion it would take too long to print, increasing the potential for errors. In this last situation, and if you want, you can simply use the “area painting tool”.<h2>Instructions</h2>ClipsSome examples regarding fits and snapfits. <a target="_blank" href="https://youtu.be/TNyjlRgM0HY" rel="nofollow noopener">(youtube link)</a>&nbsp;Extra material:<ul><li>For the hinges, you will need 2x M4x30 CHC ISO 4762, or a FHC of the same size. If you don&#39;t have that you can print.</li><li>You may want the scrape… you can find it <a target="_blank" href="https://www.printables.com/model/531116-small-scraper-tool" rel="nofollow noopener">here, it is a model that I&#39;ve Remixed</a></li><li>spacer_ silicon_sock.STEP - needed if you have a narrow silicon sock on the hotend (most people will need this)</li></ul><h3>Change Log:</h3><ul><li>(31-08-2023) Revised Latch - More functional<ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li><li>(29-04-2024) Revised Latch - More functional <ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li></ul>&nbsp;

Bambu Lab - Tools and Accessories Box

Utility