kolaalerow80

elikoll

<p>You have to put the small ring inside the skull so the head fits always perfekt.</p><p>Show me your finished print results.</p>

L EGO Skull Hitch Ball Cap Protection Brick Figure

小东西

Chester3D

<h2><strong>ENGLISH</strong></h2><p>I have spent quite a few days resolving my issue with AMS filament discharge on several of my printers. I have tried multiple mods, I have watched dozens of videos and I have read many threads on the forum and on Reddit about it.</p><p><br>Some seemed to solve the problem, but in my case none of them fixed it 100%.</p><p><br>I don't like installing unnecessary mods, in the end they create more problems than they solve. Many sell them to you as the definitive solution to all your problems, when in reality they don't fix anything.</p><p><br>Before installing any mod, I recommend that you do the following, if you are having problems with your AMS (specifically, in the filament "unloading" process):</p><p><br>1) <strong>Check your PTFE tubes that connect to the toolhead</strong>. Even if your printer is new and has only been used for a few weeks, Teflon degrades faster than I thought. The PTFE tube that you should check is the 50cm section that connects to the toolhead / print head. A degraded tube does not slide and causes blockages.<br><a target="_blank" href="https://eu.store.bambulab.com/products/bambu-ptfe-tube-3-pcs-x1-series-and-p1s?variant=46984157397340" rel="nofollow noopener">Buy new PTFE tube from the official BambuLab website</a>,<br>or <a target="_blank" href="https://s.click.aliexpress.com/e/_DcHDfmn" rel="nofollow noopener">from AE (cheaper and same quality, <strong>2.5mm ID / 4mm OD</strong>)</a>.<br> </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461913/2023-11-27_ef6bf8f7b7973.jpg"><figcaption>Original BambuLab PTFE tube on a P1S after just 3 weeks of use. On the left, the end that is outside the printer; On the right, the end that connects to the toolhead.</figcaption></figure><p><br> </p><p>2) <strong>Uninstall any mods you have installed for AMS</strong>. I don't want to single out any specific creator/mod, but in my case I have to say that some mods caused more friction and jams than before installing them. Specifically, those mods that modify the toolhead usually restrict the free movement of the PTFE tube and generate more jams.<br> </p><p>3) <strong>Remove the top glass or install a riser</strong>. It seems like a joke, but raising the glass 2-3cm alleviates the bend of the PTFE tube towards the toolhead, and after multiple tests I can confirm that removing the glass, or raising it with a riser, can fix your problems with the AMS.<br> </p><p>4) <strong>Release the PTFE tube from the cable chain clip on the toolhead</strong>.<br> </p><p>5) <strong>Install this mod</strong>, which rotates and leaves the PTFE tube completely free and natural movement without restrictions.</p><h2><br>INSTALLATION STEPS</h2><ol><li>Disconnect the PTFE tube from the toolhead, pressing the black clip that retains it with a finger, and at the same time pulling the PTFE tube upwards. Detailed guide here: <a target="_blank" href="https://wiki.bambulab.com/en/p1/maintenance/ptfe-tube" rel="nofollow noopener">https://wiki.bambulab.com/en/p1/maintenance/ptfe-tube</a><br><img src="https://makerworld.bblmw.com/makerworld/draft/461913/2023-11-27_eb29e8d86c6c1.jpg"><br><br> </li><li>Install the mod clip in the 6th position of the chain, as shown in the images below:<br><img src="https://makerworld.bblmw.com/makerworld/draft/461913/2023-11-27_86934688d2aaa.jpg"><br><br> </li><li>Insert the PTFE tube into the clip hole:<br><img src="https://makerworld.bblmw.com/makerworld/draft/461913/2023-11-27_eab370783db1f.jpg"><br><br> </li><li>Insert the PTFE tube back into the toolhead:<br><img src="https://makerworld.bblmw.com/makerworld/draft/461913/2023-11-27_ab71cc1b6499.jpg"><br><br> </li><li> <i><strong>OPTIONAL</strong></i>: Just 1 clip should be enough. However, if your PTFE tube is too long or hangs down too much, you can install another extra clip. I recommend doing it between <strong>14th </strong>and <strong>18th </strong>positions (<a target="_blank" href="https://makerworld.bblmw.com/makerworld/draft/461913/2023-11-27_86934688d2aaa.jpg" rel="nofollow noopener">check the photo of the 2nd step to know what the 14th position of the chain is</a>).</li></ol><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><h2>ESPAÑOL / SPANISH </h2><p>He dedicado bastantes días en resolver mi problema con la descarga de filamento del AMS en varias de mis impresoras. He probado múltiples mods, he visto decenas de vídeos y he leído en muchos hilos en el foro y en Reddit al respecto.<br> </p><p>Algunos parecían solucionar el problema, pero en mi caso ninguno lo arregló al 100%.<br> </p><p>No me gusta instalar mods innecesarios, al final crean más problemas de los que solucionan. Muchos te los venden como la solución definitiva a todos tus problemas, cuando en realidad no arreglan nada.<br> </p><p>Antes de instalar ningún mod, te recomiendo que hagas lo siguiente, si tienes problemas con tu AMS (especificamente, en el proceso de "descarga" de filamento):<br> </p><p>1) <strong>Revisa tus tubos PTFE que conectan al toolhead</strong>. Aunque tu impresora sea nueva y tenga apenas unas semanas de uso, el teflón se degrada más rápido de lo que yo pensaba. El tubo PTFE que debes revisar es el tramo de 50cm que conecta al toolhead / cabezal de impresión. Un tubo degradado no desliza y provoca atascos.</p><p><a target="_blank" href="https://eu.store.bambulab.com/products/bambu-ptfe-tube-3-pcs-x1-series-and-p1s?variant=46984157397340" rel="nofollow noopener">Compra nuevo tubo PTFE desde la web oficial de BambuLab</a>,</p><p>o <a target="_blank" href="https://s.click.aliexpress.com/e/_DcHDfmn" rel="nofollow noopener">desde AE (más barato, y de la misma calidad; 2.5mm ID / 4mm OD)</a>.<br> </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461913/2023-11-27_ef6bf8f7b7973.jpg"><figcaption>Tubo PTFE original de BambuLab en una P1S tras apenas 3 semanas de uso. A la izquierda, el extremo que queda fuera de la impresora; a la derecha, el extremo que conecta al toolhead.</figcaption></figure><p>&nbsp;</p><p>2) <strong>Desinstala cualquier mod que hayas instalado para el AMS</strong>. No quiero señalar a ningún creador/mod en concreto, pero en mi caso he de decir que algunos mods provocaban más fricción y atascos que antes de instalarlos. Concretamente esos mods que modifican el toolhead, suelen restringir el libre movimiento del tubo PTFE y generan más atascos.<br> </p><p>3) <strong>Quita el cristal superior o instala un riser</strong>. Parece una broma, pero elevar el cristal 2-3cm alivian la curva del tubo PTFE hacia el toolhead, y tras múltiples pruebas puedo confirmar que quitar el cristal, o elevarlo con un riser, puede arreglar tus problemas con el AMS.<br> </p><p>4) <strong>Suelta el tubo PTFE del clip de la cadeneta del cable en el toolhead.</strong><br> </p><p>5) <strong>Instala este mod</strong>, el cual rota y deja un movimiento totalmente libre y natural al tubo de PTFE sin restricciones.</p><p><br><br><br><br><br><br>-----------------<br><br><span style="font-size:10px;">* This mod tries to solve the AMS download problem: “<strong>Failed to pull back the filament from the toolhead to AMS. Please check whether the filament or the spool is stuck. After troubleshooting, click the retry button. 0700 8004 170019</strong>”</span></p>

AMS Unload Fix PTFE Toolhead Clip / Chain Clips

打印机配件

Riffcat

<p>Description for commercial use of model of sunset 3d design</p><p>The payment is twenty dollars Please make a deposit via PayPal Link: <a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a></p><p><a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a></p><p>Commercial use is indefinite if you pay $20 once</p><p>If you pay $20 once, the model and all of my models are commercially available Also, the model to be released is commercially available</p><p>There are already a lot of models coming out and modeling is done</p><p>Also, if you want, we will give you a model file that will be released</p><p>Let's make a profit from my model. Thank you for reading this For commercial use, please contact sunset_3d_design and pay the amount. Please tag me when posting on Instagram.</p><p><a target="_blank" href="https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare" rel="nofollow noopener">https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare</a></p><p>Hello, I'm sunset 3d, a student and designer. Let me introduce my dragon.</p><p><a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a> If you donate a little, it will be a big help in making a wonderful dragon.</p><p>It's free of charge for 1-2 days for multiple people to print out and be happy.<br>I was inspired by the work of a dragon.</p><p>It was a perfect design and a rewarding modeling, but there was a lot to learn.Also, we considered the user's situation as much as possible.</p><p>100% printed long! If you reduce the size of the model too much, the cross-section may be fused. You can print it out with 0. Cool, right?</p><p>And it moves so smoothly. I think it's the best model I've ever made.</p><p>I love putting new designs on cults for everyone to enjoy; I hope this is the first of many! It's my first 3D modeling, so I hope that I can improve over time and that many people like my model at least once.</p><p>This work is protected by copyright. However, if you personally send an Instagram messenger and pay the settlement fee, you can continue to sell it.</p><p>Thank you.</p><p>I printed it with 4 layers of wall and 0% imprinting (I succeeded with 0% imprinting, but I recommend 10% because it's a little more powerful.I recommend using an in-person pen.</p><p>Model downscaling may mean fusion of cross-sections, and upscaling may require support. It was tried and tested on a 100% scale, and the printing was excellent.</p><p>For best results, ensure that the printer remains calibrated, horizontal, and folded. And please share what you made!</p>

ARTICULATED flame dragon

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items<br> </li></ul></td></tr></tbody></table></figure>

小东西

打印机配件

龙

打印机配件