Knoxin

0.08mm layer, 2 walls, 100% infill

Alien UFO Hueforge

Square3D

True Designers Crescent Moon Tea Light Holder

With Texture, With Pattern or Without

Absolutely amazing print! I set the support distance to 0.28 on both, and it popped right off – worked like a charm! It’s all down to personal preference, but I have to say, it came out beautifully at a 0.16 layer too.

Jamboodle

Lilac Fairy Layered Plaque

0.2mm layer, 2 walls, 15% infill

Flat Print Display Stand

EPIQ3D

Filament Swatch Wheel

0.2mm layer, 3 walls, 15% infill

awesome print but tight on some but good print 

BeaN

Pinup "Muerte" - Hueforge

Size 200x137 X1/P1/A1 - With brim

ItsVRK

X1C/P1S Poop Retainer and A1 Nozzle Wiper v3

ASA 0.2mm layer, 2 walls, 15% infill

Amazing had to reprint a few times due to speeds and ABS with ABS support these are my settings printed spot on, slowed it well down slow is key,  love it!!! worth the boost 

AVGCZ2

fan cover HEX

0.2mm layer, 3 walls, 15% infill, top and bottom layers 0

Xtronchox

PTFE Clip Chain para P1P P1S x1 carbon cadena

printed in main in ABS then the Black ABS-GF

PRINT3DGIFTS

Bambu Lab X1/P1 Series Poop Chute Cutout Cover

Head fan cover V2 GRID 

BAmbuLab logo

Akelyte

Z-Shield V2 - Z-Axis Cover for P1P, P1S, and X1C

ALL PLATES - PETG PROFILE (0.16mm layer, 2 walls, 15% infill)

printed in ABS-GF with ABS green awesome print very close to plate :) 

JDJDJD

The Smoothy - Y Splitter Connector

ABS 0.08mm layer, 7 walls, 30% infill

awesome build slowed it down to. 3 hours 40 min print in ABS as well

LoFi Layers

Blanka (Street Fighter) Hueforge

Hába97

Jack Russell Terrier dog (JRT) keychain, magnet

0.12mm layer, 2 walls, 80% infill

looks like picture :) did 2 version in different colours 

Peprinter

IT crowd sign

Flat surface - face down, Size 80%, 2 mm thickness

Did this with some different setting and flat version,  just cause I was messing about on Bambu changed quality setting, still looks ace. Hopefully my son will stop asking me everytime the net goes off on his powerline cause this is always the answer

eds_3d_shop

AMS Feeder Funnel Saver Protector Filament Guide 

4x "Arrows"-Logo AMS Feeder Protector [PLA] 0.16mm layer, 2 walls, 20% infill

VroDoPrints

Aux Fan Cooling Guide

good design supports painful to get out in one. use PETG as support layer of PLA for PETG pops right out then 

PLHuney

Get In Loser

0.4mm layer, 2 walls, 15% infill

The Austin Zombie

Dick in a Box (hinged)

** Updated ** 0.2mm layer, 2 walls, 10% infill

had some fun modes with writing and sperms haha friends gonna love it, it’s for a joke 

Litolunar

StormTrooper Star Wars - HueForge 150x150