knownchild

Brandido02

The rims and center ring are straight from Bambu's spool. And interchangeable with it. It is designed for Bambu's refill spools. But I have found that Elegoo spools also fit perfectly on it. Also Overture and Polymaker spools fit but are a bit loose, but they fit perfectly over the center rings of Bambu and Elegoo spools. So, I use them as spacers. Let me know if you try it with any other brands!I recommend PLA because it is a lot stiffer than PETG.&nbsp;03/24/23 - I've got multiple requests, so I uploaded a version 2.3 and 3.3 that remove the little notch on the inner ring. I left print profiles with versions 2.2 and 3.2 that still have the notch for Bambu spools. Note, I think the notch is important because it locks the cardboard inner ring so it doesn't spin free of the spool. &nbsp;12/14/23 - WOW 7K Downloads!!! Some folks asked for a filament scale, Soooo here is v2.2 and v3.2!!! The left side of both have a filament scale. The right side is unchanged.&nbsp;11/19/23 - Here is v2.1 and v3.1!!! The only difference is I added a 2mm hole in the Left side of the center ring for filament to be inserted when respooling. Though respooling isn't what I usually do. I actually have found that the cardboard center of other spools fit right over the center of this spool. Specifically, Elegoo fits perfectly. you just need to nip out a little notch. I have also done it with Overture and Polymaker. but their center rings are a little bigger and so are a bit loose. But, the center ring of an overture spool fits snugly right over the center ring of an Elegoo spool, which fits snugly over the center ring of this Bambu spool!&nbsp;10/19/23 - Wow! 3K downloads! Here is Version 3! it uses less filament and takes less time. But it may not be as strong. I have been testing it now for a couple weeks without any problems.&nbsp;9/29/23 - Uploaded v2. I completely remade the spool using Bambu's newest spool. The rims are completely smooth now.&nbsp;Here is a remix of Bambu's Filament spool but with hexagons to use far less filament without sacrificing strength.The rim filament holes are also angled so as not to introduce a sharp bend into the filament. Also, there are more of them around the rim.This is interchangeable with the original Bambu rims.&nbsp;Note: the spacing shim goes on the inside of the spool to lock the two halves together. Though I haven't needed it because they lock together pretty tight. But Bambu recommends it, so I included it.&nbsp;Why hexagons? Because hexagons are the best-agons!&nbsp;Notice: Print profiles NOT created by Brandido02 may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control over these third-party print profiles.

Bambu Reusable Hex Spool

Bambu upgrades

Muskoka Research

<div><h1>Summary</h1><div>This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLEAdditional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stlAssembly (See Pictures):<ol><li>Adhere Frame Base Pad TPU to Frame.</li><li>Install Grip TPU to Frame and Vise via dovetail slots.</li><li>Partially thread in Mounting Bolt.</li><li>Thread Mount Plate TPU onto Mounting Bolt.</li><li>Mount the vise to a benchtop to complete the following steps.</li><li>Feed both guide rods through the Frame and Vise.</li><li>Attach one Retaining Clip to the grooved sections at the base of each guide rod.</li><li>Install Threaded Rod all the way through the Frame and Vise.</li><li>Attach the final Retaining Clip to the end of the Threaded Rod.</li></ol></div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.2</div> <pre><code> Infill: <div>20</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Duramic+PLA%2B+%2F+TPU" target="_blank" rel="nofollow noopener"> Duramic PLA+ / TPU </a><pre><code> Grey/Black</code></pre></div>

Clamp-On Vise - Fully 3D Printable

Usefull

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Bambu upgrades

Usefull

MasterSwordPen