klimispp

SartorialGrunt0

This is a remix of a few popular daedric armor busts from thingiverse. I did not create or design these models but remixed a combination of all three to create a single combined model of the Daedric Armor Bust with the alternative base. The model and images are curtesy of the following links.&nbsp;-Daedric Armor Bust - <a target="_blank" href="https://www.thingiverse.com/thing:2314205" rel="nofollow noopener">https://www.thingiverse.com/thing:2314205</a>-Alternate Base Model - <a target="_blank" href="https://www.thingiverse.com/thing:3702791/files" rel="nofollow noopener">https://www.thingiverse.com/thing:3702791/files</a>-Combined Model - <a target="_blank" href="https://www.thingiverse.com/thing:4194980" rel="nofollow noopener">https://www.thingiverse.com/thing:4194980</a>&nbsp;&nbsp;Concessions:<ul><li>It needs alot of supports</li><li>It will take a very long time to slice if you print for maximum detail.</li><li>It gives some warnings about the mesh having gaps. The slicer resolves this for you.</li></ul>This is a very cool model but print at your own risk.

Daedric Armor Bust

Busts

Eluded Studios

Introducing the Sweet Tooth Kit Card. If you are unfamiliar with Sweet Tooth, he is a character from the video game Twisted Metal. Which was also made into a TV Show on Peacock. My model was designed with heavy inspiration from the PS3 version of the game. This version of Sweet Tooth also appears in Rocket League. I have always wanted a model of this truck and the kit card was a great inspiration for me to make that possible. I created this with AMS in mind to easily color and show off every detail.&nbsp;If you would like to sell my models commercially, please consider joining the Patreon, I could use your support: <a target="_blank" href="https://patreon.com/EludedStudios?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink" rel="nofollow noopener">Patreon</a>&nbsp;If you wish to show your support for my work in way of donations, please buy me a coffee: <a target="_blank" href="https://www.buymeacoffee.com/eludedstudios" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;There are 2 profiles currently available. Tight Fit and Snug Fit. Tight Fit will require careful construction and proper printer calibration. This model will require some amount of pressure to be applied to each part, but this is to ensure no glue is required. (This version is seen in my print photos). The Snug Fit has a slight reduction to the sides of each pin to help push together a bit easier, but should still stay together on it's own.&nbsp;Every part of this model is separated and can be easily colored in the Object menu. This was done so that painting is not required. Simply select the object and choose filament color. (Exception to this is the head, I painted this for the flame effect and face paint)<img src="https://makerworld.bblmw.com/makerworld/draft/767346/2024-03-06_a8490b631ff288.png">&nbsp;Note: If you wish to print these parts without the frame, simply select the frame within the object menu and delete it. (Exception to this is the head)<img src="https://makerworld.bblmw.com/makerworld/draft/767346/2024-03-06_a06a67f0c955c.png">&nbsp;&nbsp;Assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767346/2024-03-06_6935ea5c515228.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767346/2024-03-06_e7f4d69ee6c65.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767346/2024-03-06_9eb6e4a26a04e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767346/2024-03-06_dd08fab31dd728.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767346/2024-03-06_dcd430e5f72fc.jpg"></figure>&nbsp;This model took a lot of time and effort, I hope you enjoy it as much as I do. If you have any issues, please let me know and I will do what I can to get them fixed.

Sweet Tooth Kit Card

puzzle kit games

alessandro.zamagna2

This is a multipart Charizard, 16 files to scale so that each part can be printed in the right color and become as big as you want. The only thing I had to paint were the wings cause I wasn't able to split them. The one in the picture is the one I printed(250%scale), its 35cm high and large 40cm. Hope you guys enjoy! Let me know what you think.

Charizard Multipart

pokemon

MILLZ3D

4 inch dog paw cookie cutter, easy fast print!

4 inch Dog paw Cookie cutter

cookie cutter

chameko小廢物電波塔

<blockquote>12/06 After many tests, I successfully found out the cause of the assembly problems reported by some users, and modified the side panel file "AMS Dry Box-SW_v2".NOTE!I Designed this model not only for ams, I also used it in the vacuum bag that holds the filament, so I needed tight tolerances to make the box strong enough. The tolerance is 0.3mm, please be sure to confirm before printing this model.</blockquote>Open the side lid and pour about 60g of silica.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_92a6870d48198.jpeg">&nbsp;There is a buckle design on the top, please make sure it is buckled correctly when installing.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_2f71bc9cf33e9.png">&nbsp;&nbsp;The front and back of the V2 version have relaxed tolerances in most areas, making it easier to install. I kept the last small area because without this part, you might get the box and slide it open like in the second picture, resulting in a mess.Please be careful not to install it in the wrong direction when installing.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_fcf2db2bab532.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_210d78c4699ec.jpeg">&nbsp;If you have trouble assembling them, try using a heavy object to knock them into the correct position.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_e0f13f6121362.jpeg">&nbsp;As for why I used this complex design, it was because I considered that he had to withstand several kilograms of impact from the filament, so I wanted to distribute the force as equally as possible to each part.<img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-25_90a605e9c843e.png"> <blockquote>Also I have a beautiful model related to AMS! Don’t miss it!</blockquote><figure class="image image_resized image-style-side" style="width:56.75%;"><a href="https://makerworld.com/zh/models/99476#profileId-106044" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/306465/2023-12-23_3d850a0169288.jpg"></a></figure>Do you always find the AMS feeder difficult to press? Are the models on the Internet very difficult to install? I have improved and carefully designed this model. Please be sure to try it!(click on the image to go to the page!)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<blockquote>----------中文解說----------</blockquote>打開側蓋後約可倒入60g的乾燥劑. 上方具有卡扣設計,安裝時請確認有正確的扣上.&nbsp;V2版本的正面與背面放開了大部分區域的公差,使其較容易安裝. 我保留了最後一小區域,因為沒有這個部分的話,你可能再拿取盒子時像第二張圖一樣滑開,導致一團糟. 安裝時請注意不要裝錯方向.&nbsp;如果你在組裝上遇到了困難,可以嘗試使用重物敲擊他們使其安裝至正確的位置. 至於為什麼使用這種複雜的設計,是因為我考慮到他必須承受數公斤來自線材的撞擊,因此我想盡可能地讓力量平均分攤到每個部分.

AMS Silica Gel Box[V2]

printer parts

Sakkez Games

Playstation 1 PSX memory card shaped keychainHave fun creating different ones in multiple colorsIf you like my projects follow me and I will do my best to always create new and interesting things

Memory Card PSX keychain

keychain

darvil66

HARRY POTTER HUFFLEPUFF bookmark Marcador libros HARRY POTTER HUFFLEPUFF

HARRY POTTER HUFFLEPUFF bookmark Marcador libros HARRY POTTER HUFFLEPUFF

bookmarks

Morgan89

Please consider supporting me on Patreon: <a target="_blank" href="https://www.patreon.com/DanielNoree" rel="nofollow noopener">https://www.patreon.com/DanielNoree</a>After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer.Now, i am not talking about a "print-several-pieces-and-then-assemble" version which there are already a ton of on the internet. What i wanted to do was something i could print and that would actually be fully working straight out of the printer. I like to think i came pretty close. All you need to do is to remove the internal support and your done!Keep in mind this is a proof of concept, i just wanted to see if i could do it.Updated 2013-10-16: Added "Printable Wrench W Longer Screw" which has a longer "screw" (3mm).Updated 2013-08-30: I have added two new files. One with a slightly bigger gap between moving parts. This one has 0,55mm gap instead of 0,35mm. Let me know if it works out (in particular with PLA). I have also added a STEP file with no support for anyone who maight want it.Here is a short video: <a target="_blank" href="https://youtu.be/Eq_JI3yctJ8" rel="nofollow noopener">https://youtu.be/Eq_JI3yctJ8</a>Experimantal "heavy duty" version: <a target="_blank" href="https://www.youmagine.com/designs/printable-wrench-reworked" rel="nofollow noopener">https://www.youmagine.com/designs/printable-wrench-reworked</a>Please consider supporting me on Patreon: <a target="_blank" href="https://www.patreon.com/DanielNoree" rel="nofollow noopener">https://www.patreon.com/DanielNoree</a><h2>By Daniel Norée</h2>

Fully assembled 3D printable wrench

tools

左狗拳

模型外形参考：CSGO 骷髅匕首（Skeleton Knife）组装工具：无分件：无分件其他：一体打印，请视自己机器设置打印参数。原创模型，仅供个人打印，请勿商用。组装视频<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1yr4y1X7Ef/?spm_id_from=333.999.0.0&vd_source=ce261a6ae096f6019cad589ef253bc72"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1yr4y1X7Ef&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1yr4y1X7Ef&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

骷髅匕首（Skeleton Knife）

knives

Tommy Gun

Here&#39;s a nice set of 5 coasters and amazing question mark block coaster holder/box !!&nbsp;Easy print, only have the ? and dots inserts to glue on as i wanted to save on filament !!!&nbsp;Coasters Dimensions: 104 mm diameter 4 mm height&nbsp;-Print x4 question mark inserts and x16 Dots inserts&nbsp;Interested in selling my prints : <a target="_blank" href="https://patreon.com/Papa3dHomemadePrints" rel="nofollow noopener">https://patreon.com/Papa3dHomemadePrints</a> &nbsp;Brother Box <a target="_blank" href="https://makerworld.com/en/models/112575#profileId-120555" rel="nofollow noopener">https://makerworld.com/en/models/112575#profileId-120555</a> &amp; Super mario Pipe holder : <a target="_blank" href="https://makerworld.com/en/models/101819#profileId-108453" rel="nofollow noopener">https://makerworld.com/en/models/101819#profileId-108453</a>&nbsp;Pen box&amp;pipe holder : <a target="_blank" href="https://makerworld.com/en/models/141100#profileId-153752" rel="nofollow noopener">https://makerworld.com/en/models/141100#profileId-153752</a> &nbsp;Question mark lightbox : <a target="_blank" href="https://makerworld.com/en/models/127720#profileId-138211" rel="nofollow noopener">https://makerworld.com/en/models/127720#profileId-138211</a>&nbsp;Grey Brick coaster box and coasters : <a target="_blank" href="https://makerworld.com/en/models/210143#profileId-230023" rel="nofollow noopener">https://makerworld.com/en/models/210143#profileId-230023</a>

Super Mario ? Coaster Box and Coaster set x5

coasters

standitupstore

Mera Mera fruit from one piecePrints in 2 pieces cut on the bottom for easier printing