khaminhsteven

majani3dprint

Just let your mind wander. The three main elements slot together easily and the drip tray can be easily removed for convenient cleaning. The decorations on the edge of the hill must be attached to the embossed areas with superglue. Have fun printing.

Teebeutelhalter, Teabag-holder, Teagalken

things to print

Balzo98

Based on some images found on the internet here's my version of Derp Charmander!

Derp Charmander

pokemon

ebjspecials

Hello Makerworld Community, Here comes my own model of a "Cardboard Spool Ring" for JAYO cardboard spools.The reason why I designed my own is that a good 95% of the rings on all known 3D websites slip because there is no attachment and therefore the spool rotates in the ring but not on the AMS rollers.&nbsp;You have to print the part/link to fix it 4 times, 2x for each side of the Spool. When pushing on the fixing link, it is best to press it several times or put the Spool upright so that it slides all the way onto it like in the photo. Current version: v1.4 Last change: Diameter reduced to less than 200mm&nbsp; Hallo Makerworld Community, hier kommt mein eigenes Modell eines "Cardboard Spool Ring" für JAYO Pappspulen.Der Grund warum ich was eigenes konstruiert habe ist, dass gut 95% der Ringe auf allen bekannten 3D-Webseiten in sich durchrutschen, weil keine Befestigung existiert und somit die Spule sich im Ring dreht aber nicht auf den AMS Rollen.&nbsp;Das Teil/Glied zum Fixieren müsst ihr 4 mal Drucken, 2x für jede Seite der Spule. Beim aufschieben des Fixiergliedes am besten mehrmals drücken bzw. die Spule hochkant stellen damit es ganz drauf rutscht wie auf dem Foto.&nbsp;Aktueller Versionsstand: v1.4 Letzte Änderung: Durchmesser auf unter 200mm verkleinert

AMS Cardboard Spool Ring JAYO

filament holder

madizmo

This is the latest version of my AMS saver after bambu asked me to take down my old models. Apparently some people managed to damage the feeder leds with some of the previous models. This version mounts to the top of the feeder unit using double sided sticky tape so there is absolutely no chance of causing any damage to your AMS unit. I used the clear 1mm thick sticky tape off Temu on mine and they are stuck very well. I&#39;ve been using 100mm ptfe tube with no issues, if you seem to get loading issues try 85mm. The ID of the ptfe hole is 4.2mm but because of the print orientation it can still be tight, i run an allen key through it along the top edge to smooth the layers a bit. You can play with flow rate a bit as well if too tight&nbsp;works best with my <a target="_blank" href="https://makerworld.com/en/models/172221#profileId-189118" rel="nofollow noopener">filament guides</a>, the ones in the pictures i&#39;m still testing but the originals work great&nbsp;&nbsp;Disclaimer: This is a modification to the machine and any issues caused by these mods will not be covered by Bambu.

AMS Saver V5

P1S Add On

ArgiCZ

You may also like:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/175862#profileId-193396" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/858398/2024-04-15_e0b70d75ffbfc.png"></a><a target="_blank" href="https://makerworld.com/en/models/163838#profileId-179833" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/858398/2024-04-15_aa119ac402f1c.png"></a>&nbsp;Happy Valentine&#39;s Day and happy printing!

things to print

pokemon

filament holder

P1S Add On

valentines