Kobold Foundry

user_3006765118

<h3>A human sized Sauron's Mace, not much else to say here!</h3>In the middle of the parts there is a hole with a diameter of 16mm, it's for a wooden (or any kind of material) stick, that way the mace won't be flimsy when you glue it together. There are also two 5mm holes for two metal sticks, you can skip this probably but I recommend putting any kind of sticks in, to securely keep the mace parts from rotating after you glue them together (I myself decided to just print a couple of long 4.5mm diameter sticks and put them into the holes to make sure all the parts are aligned) You must print: 2x"blade with hole 1" 2x"blade with hole2" 4x"blade 1" 4x"blade 2" 1x “pole ring” 1x “ending 1” 1x “ending 2" 1x “top mace 1” 1x “top mace 2" 1x “top mace 3” 1x “pole 1” 1x “pole 2” 1x “handle bot” 1x “handle mid” 1x “handle top” You don't need any supports! Please post a make once you're done :)CREDITS: <a target="_blank" href="https://sketchfab.com/3d-models/replica-saurons-macefree-3244efe0d8fb4aba95951149961fff07" rel="nofollow noopener">Initial model</a> was made by “VertexDon”, I based the whole model on it and made it printable.

Sauron's Mace

Nerd Stuff

tsubus

IMPORTANT: you cannot use the profiles that some people have posted, you must use the raw files (click download STL and select the appropriate 3mf file). Makerworld removes any custom gcode from posted profiles.&nbsp;Simple temperature towers for the Bambu Lab P1S created with Tinkercad. The files already contain the necessary g-code to print correctly with Bambu Studio.&nbsp;Currently the following towers have been added:  <ul><li>190-230 (PLA) (steps of 5)</li><li>230-190 (PLA) (steps of 5, reversed)</li><li>230-270 (PETG) (steps of 5)</li><li>270-230 (PETG) (steps of 5, reversed)</li><li>240-280 (ABS) (steps of 5)</li><li>280-240 (ABS) (steps of 5, reversed)</li><li>210-240 (TPU) (steps of 5)</li><li>240-210 (TPU) (steps of 5, reversed)</li></ul>

Nerd Stuff

Calibrations