kevinbakon

KlausKolbe007

<p>HSW Buildplate holder for 5 A1 Mini Buildplates.</p>

HSW Bambulab A1 Mini Build Plate Storage for Honeycomb Storage Wall

Honeycomb Storage Wall (HSW)

Calminata

<p>I Created this Pins for more stability at the fantastic Pastamatic.</p><p>There are three Versions for the Pins. If u look on the Screenshot → On the original Pastamtic u have to use the Pins in the middle and the right side. Delete the four long pins on the Top. If u use <a target="_blank" href="https://makerworld.com/en/models/190610#profileId-210405" rel="nofollow noopener">my Motormount</a> → Delete the right one and use that four on the Top instead.</p><p>&nbsp;</p><p>12mm wrench recommended</p><p>&nbsp;</p><p>The Screws i took:</p><ul><li>Short Pins M4x10</li><li>Long Pins M4x16</li><li>MotorMount Pins M4x16 or M4x20</li></ul><p>Important! Screw it down with less strength! U have to check that the Gears are turning free…!</p><p>&nbsp;</p><p>Here are my other Pastamatic Add on`s:</p><ul><li><a target="_blank" href="https://makerworld.com/en/models/190610#profileId-210405" rel="nofollow noopener">Pastamatic Motor Upgrade</a></li><li><a target="_blank" href="https://makerworld.com/en/models/183428#profileId-202182" rel="nofollow noopener">Pastamatic Guiding-Cube Upgrade</a></li></ul><p>&nbsp;</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">Enjoy, </span><strong>have Fun</strong><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;"> and Visit or Follow my </span><a target="_blank" href="https://makerworld.com/en/u/3635909920" rel="nofollow noopener">Profile</a><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;"> for more!</span></p>

Pastamatic - Screwable Pins

Spool Winders

MakerVerse Designs

<p><strong>Fully 3d printed crocs shoes</strong></p><ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul><p><strong>Important notes:</strong></p><ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul><p>&nbsp;</p><ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up <strong>without</strong> support</li><li>Or use another not so sticky bed and print it standing up <strong>with</strong> support</li></ol><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png"></p><p>&nbsp;</p><p>If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):</p><p><a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a></p><p><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png"></p><p>Have fun with it and leave a like or subscribe if you like it!</p><p>If there are any suggestions for improvement, feel free to write a comment.</p>

Crocs Shoes - Fully 3d-printed

Wearables 

Make Soon

uhltimate

<p>Create your own OTF (Out-The-Front) fidget knife with just three 3D printed parts! This compact design is perfect for restless hands, providing smooth OTF action for endless fidgeting fun. Watch my YouTube video for assembly instructions and start printing your own today!</p><p>&nbsp;</p><p><strong>Update:</strong></p><p>01.05.2024 - Added a guided Blade Version with a stronger locking mechanisms.</p><p>02.05.2024 - Added a comb Version as alternative.</p><p>&nbsp;</p><p><strong>Features:</strong></p><ul><li>Three easy-to-print parts</li><li>Smooth OTF action</li><li>Portable design for on-the-go fidgeting</li></ul><p><strong>Instructions:</strong></p><ol><li>Print the three parts.</li><li>Follow our assembly video.</li><li>Enjoy your custom OTF fidget knife!</li></ol><figure class="media"><div data-oembed-url="https://youtu.be/IQcEFHvocRc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/IQcEFHvocRc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

OTF Fidget Knife - only 3 Parts

Fidget

Binrux3D

<p><strong>Model:</strong></p><p>&nbsp;</p><p>Stairway to nowhere! Use this to test overhangs and decorate your desk!</p><p>&nbsp;</p><p><strong>Printing:</strong></p><p>&nbsp;</p><p>Use provided print profiles for best results! I&#39;ve tested sizes down to 50% which have still worked, but I&#39;m only including the 100% and 50% versions as print profiles. If you want try 35% or 75% feel free to scale the print profile, or download the included STL:s.</p><p>&nbsp;</p><p>Print does not require any supports or assembly.</p><p>&nbsp;</p><p><strong>Hope you enjoy the model!</strong></p>

Stairway to Nowhere - Overhang test - Desk model

Calibration

SavageLau

<p>I am having issue with put my build plate on my A1.</p><p>The original guide does help aling the build plate, but I feel like those two on the side does not help that well, since it is so low to the printer bed. So I made this build plate aligner deisgn to help easier put you build plate down.</p><p>&nbsp;</p><p><i><strong>Due to the nozzle prime brush located on the left, and nozzle have travel a lot of the left, I don't think it worth the risk to put anything on the left.</strong></i> Plus, this one on the right side is already good enough to help you locate the build build.</p><p>&nbsp;</p><p>It cost very little filament, <i><strong>less than 5g</strong></i>. Around <i><strong>19m printing time</strong></i>. Suggests print at least with <i><strong>PETG, or ABS</strong></i>.</p><p>&nbsp;</p><p>&nbsp;</p><h2><span style="color:#E14747;">ATTENTION! If you are firmware version 01.01.50.24 or above, do not use other people's printing profile, model is not longer compare after firmware update. </span></h2><p>&nbsp;</p><h2>Update 1/27/2024: New model updated, name “for 01.01.50.24 firmware”. </h2><h3>New firmware version: 01.01.50.24(beta) will cause issue. I have found nozzle clumping detection cause the issue. It is automatically enabled after firmware update. But no option to disable it currently. More information from Bambu Wiki: </h3><h3><a target="_blank" href="https://wiki.bambulab.com/en/a1-mini/manual/nozzle-warp-detection" rel="nofollow noopener">https://wiki.bambulab.com/en/a1-mini/manual/nozzle-warp-detection</a> </h3><p>&nbsp;</p><h3>Issue description: </h3><p>After update firmware 0.1.01.50.24. Print stops randomly in the middle and error note shows: </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461583/2024-01-27_271f7f17e33c4.png"></figure><p> Nozzle will park on the aliger area and cuase issue. </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461583/2024-01-27_b0eecdf4e5003.png"></figure><p> According to BBL Wiki: </p><p><strong>"1. After printing all the walls of the first object on the third layer of this plate, the tool head will move to the position of the purge wiper for the first detection.</strong><span style="background-color:rgb(255,255,255);color:rgb(66,66,66);font-size:16px;"> The specific coordinates of the nozzle during detection:  A1 mini (X-6, Y 170, Z-1); A1 (X 261, Y 250, Z-1). The detection process is shown in the following figure.</span><strong> " </strong></p><p>&nbsp;</p><h2>Install guide:</h2><p>Align from the back, push the aligner pin into the bolt hole under the build plate.</p><p>Confrim top part is all the way in.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461583/2024-01-04_7cd7e48eb7b47.gif"></figure><p>&nbsp;</p><p>&nbsp;</p><p>Many revisions was made and many tests was done to confirm it not only works but also get good fit and finish:</p><figure class="image image_resized" style="width:55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/461583/2024-01-05_2c006911bca8.jpg"></figure><p>&nbsp;</p><h2>Material:</h2><p>Highly suggest to print with ABS or better <i><strong>heat resistant material</strong></i>. PETG Will works. PLA is not recommaned.</p><p>I also made cut line design on alginer, those cut slots should help guiding the direction when thermal expansion and retraction happen. Which it should bond on the printer bed more if thermal deformation occurs.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/461583/2024-01-04_ec38222ff07b3.png"></figure>

A1 Build Plate Aligner

Viiitek

<p>EN: Since I use a lot of filament from the manufacturer Geeetech and Jayo, I developed this spool holder, which can be printed with a layer height of 0.16 mm even without a support structure. I found it annoying to always unscrew the thread on the adapters. With this adapter, I can immediately put the adapter on another spool when I remove the roll from the AMS Lite and attach it to the AMS Lite.</p><p>&nbsp;</p><p>DE: Da ich sehr viel Filament des Herstellers Geeetech und Jayo benutze, habe ich diesen Spulenhalter entwickelt, der mit einer Schichthöhe von 0.16 mm auch ohne Stützstruktur gedruckt werden kann. Mich hat es genervt immer das Gewinde bei den Adaptern aufzuschrauben. Mit diesen Adapter kann ich beim abziehen der Rolle von dem AMS Lite den Adapter sofort auf eine andere Spule anlegen und auf das AMS Lite aufstecken.</p>

AMS Lite Spool Adapter for Geeetech, Jayo Filament

Filament

Sparks3D

<p>I'm thrilled to introduce my Tiki Bathroom MINI SET, a dive into Polynesian tribal style to transform your bathroom into an exotic oasis. This set of 6 accessories is a tribute to the craftsmanship and vibrant forms of island cultures.</p><p>Let's start with the toothbrush holder, embellished with embossed masks that dance around its outer surface. It's not just beautiful to look at but also practical, with a gridded bottom to collect excess water. Next is the wall mount for electric toothbrushes, inspired by a wood-carved idol, a guardian for your devices.</p><p>The soap dish is a little masterpiece, with decorations along the edges and a tribal mask as a base that cradles the soap. The towel hanger, shaped like a mask with 3 hooks on the chin, is perfect for organizing towels or small guest hand towels, turning an everyday item into a conversational piece.</p><p>Let's not forget the toothpaste squeezer, an indispensable accessory transformed into an artistic expression with its tribal mask appearance. We also add one tealight holder, reminiscent of Tiki torches, perfect for lighting your evening rituals with a soft and relaxing light, fitting various sizes of LED candles up to 38mm in diameter.</p><p>The entire set is designed to be printed in PLA, and almost all items are modular, so you can split them into parts within the slicer and customize them with colors and styles to your liking. Included with the set are also optimized 3mf files for Bambu Lab printer owners. 3D printing enthusiasts will be pleased to know that the entire set is available for free, unbranded download for personal use! And for those looking to turn this passion into a business opportunity, thanks to my <a href="https://than.gs/u/1281808?plans=true&affiliateCode=Sparks3D" rel="nofollow">Commercial Print&Sell plan on Thangs</a>, you are allowed to sell products made from my designs worldwide without limits, in addition to special exclusives only for subscribers.</p><p>Immerse yourself in the Polynesian atmosphere and let the Tiki Bathroom MINI SET bring a touch of art and functionality to your everyday life.</p><p><strong>TIKI TIKI!</strong></p>

Tiki Bathroom mini set

Tiki

thrutheframe

<h3>NOTE:</h3><p>Please read the instruction guide below. I try to make the guide as comprehensive as possible and will fine-tune it along the way with user inputs.</p><p>I do my best to double-check and test the print profile I create. <span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">They are up to date with whatever changes I made to the designs. If you are using profiles made by others, please check if they are updated.</span></p><p>&nbsp;</p><h3><strong>UPDATE 06 Mar 2024</strong></h3><p>Expanding the CUE ecosystem, I have added a bracket for Prusa Mk3/4 and a tabletop bracket (CUE UP) for A1 mini and Prusa Mini. Please choose the correct print profile for the different printers. In addition, I am working with US and EU vendors<span style="background-color:rgb(255,255,255);color:rgb(15,20,25);"> to provide CUE and also CUE hardware kit (pre-cut acrylic cover, and all the parts in the Bill of Material) . Users can buy CUE read-to-use or print their own and assemble with the hardware as a project. More information on vendors coming soon. </span></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_616e37ccd788c.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-03-06_89d0ba053233f.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-03-06_5be333ad41862.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-03-06_83cc98398603c.png"></figure></td></tr></tbody></table></figure><h3> </h3><h3>INTRODUCTION</h3><p>Living in Singapore, South East Asia, the high humidity makes printing pet-g challenging due to the hygroscopic nature of the material. A spool of pet-g cannot be left in the open for long prints and can result in stringing and print failure. I enjoy printing with <a target="_blank" href="https://store.bambulab.com/collections/petg/products/petg-cf?variant=40741030461555" rel="nofollow noopener">Bambu Lab PETG-CF</a>, but it requires a dry box to use on the Bambu Lab A1. So I designed <strong>CUE</strong>.</p><p>&nbsp;</p><p><strong>CUE</strong> is an acronym for Cute, Unique, and Enclosed. It is a single-spool passive dry box CU-case that can be slotted into the CU-bracket (mounted on the A1);</p><ul><li>The CU-case with the filament spool inside can be removed and stored away when not in use.</li><li>The spool rolls on PTFE tubes for smooth movement.</li><li>A reusable silica bead cartridge (Dri-Cell) can be easily replaced without the need to open the CU-case.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_616e37ccd788c.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_2f2f8c7ff0a08.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_f5f4cfd5311a8.png"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td><p>Due to design limitations, CUE will fit spools with the following dimensions.</p><ul><li>OD 200-201mm</li><li>ID 52-54mm</li><li>Thickness ≤ 71mm</li></ul><p>Spools tested:</p><ol><li>Bambu Lab spool</li><li>Polymaker cardboard spool</li><li>Hatchbox</li><li>Prusament spool</li><li>Esun plastic spool</li><li>FusRock clear plastic spool</li><li>Creality spool</li></ol></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-16_695be7f03b932.png"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><p>As with all my design process, I set a few parameters and requirements when designing <strong>CUE</strong>:</p><ul><li>Easy and lean design to print.</li><li>Easy to use ( as much as possible)</li><li>Mounting on the top gantry of the A1</li><li>Sturdy and reliable when fully loaded.</li><li>Secure mounting using screws.</li><li>Keeps the air within the case dry using reusable silica desiccant.</li></ul><p>&nbsp;</p><h3>BOM</h3><figure class="table" style="float:left;width:66.02%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Ø6mmxL3mm magnets</td><td>6pcs</td></tr><tr><td>M3xOD5mmxL4mm (or M3xOD5mmxL3mm) Brass Inserts</td><td>6pcs</td></tr><tr><td>M3x10mm BHCS (or M3x8mm BHCS)</td><td>6pcs</td></tr><tr><td>3mm Acrylic Cover</td><td>1pcs (svg & dxf in zip file)</td></tr><tr><td><p>PTFE tube OD4mmID2.5mm</p><ul><li>72mm</li><li>130mm</li></ul></td><td><p>&nbsp;</p><p>4pcs (use the 72mm rig)</p><p>1pcs</p></td></tr><tr><td>PC4-M10 Pneumatic Coupler</td><td>1pcs</td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h3> </h3><h3> </h3><h3> </h3><h3> </h3><h3> </h3><h3> </h3><p>&nbsp;</p><p>&nbsp;</p><h3>PRINT GUIDE</h3><p>One set of <strong>CUE</strong> (plates 1,3,4) uses about 418gm of filament and takes 11h10m</p><p>The rigs and accessories (plate 6) use 63gm of filament and takes 1h55m</p><p>The project profile is tuned for Bambu Lab A1 using <a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament" rel="nofollow noopener">Bambu Lab PLA Basic filaments</a>.</p><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-03-06_421fd33756403.png"></figure><p>&nbsp;</p><h4><u>Build Plate 1 & 2</u></h4><ul><li>You only need to print either plate 1(dual colour) or plate 2 (single colour).</li><li>The time taken to print single or dual colour is about the same as there are only 3 layer changes.</li><li>I prepare 2 sets of Dri-Cell to be printed because it's always good to keep a spare set.</li></ul><p>&nbsp;</p><h4><u>Build Plate 3</u></h4><ul><li>This is the CU-case for the filament spool.</li><li>Support is needed.</li><li>Print time is about 7h30m and uses 288gm of filament using my print profile.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_0a0cb0e1a49dd.png"></figure><p>&nbsp;</p><h4><u>Build Plate 4</u></h4><p>Consist of the cu-bracket for A1 (or Prusa Mk3/4 if you are the 3mf for Mk3/4)</p><p>&nbsp;</p><h4><u>Build Plate 5</u></h4><p>Consists of the stl for CUE UP, a tabletop stand for A1 mini and Prusa mini.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-03-06_c25c17b52bfd4.png"></figure><h4> </h4><h4><u>Build Plate 6</u></h4><p>Consist of:</p><ul><li>2 sets of ptfe tube covers and connectors.</li><li>72mm rig to cut the ptfe rollers. You will need 4 pcs per CU-case</li><li>Cu-case magnet installation rig.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_62f9fd0020a9b.png"></figure><p>&nbsp;</p><h3>INSTALLATION GUIDE</h3><p>Before installation, remove the support structures on the CU-case. You will also need to get the acrylic cover cut to size: the OD=215.6mm and ID=32mm. I have included the dxf and svg in a zip file under the<i> RAW Model Files</i> section.</p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-12_e51738603c08a.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-12_9be5183d39e2c.png"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><ol><li>Install the Ø6mmxL3mm magnets into the CU-key and CU-bracket. Ensure the polarity is right so that both parts snap together.</li><li>Install the M3xOD5mmXL4mm brass inserts into the CU-bracket.</li><li>Slot the CU-bracket onto the top aluminium gantry of the A1, roughly at the centre. Do not install the CU-bracket at the edge of the top gantry. This is because it will knock against the x-axis gantry. You need a minimum of 35mm gap.</li><li>Use the M3x10mm screws to secure the CU-bracket with the CU-bracket cover.</li></ol><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_04e68d5a469b2.png"><figcaption>1</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_2d18be8cbbf19.png"><figcaption>2</figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_12b5fc3cfdce2.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_4a74dbebcb304.png"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><ol><li>Install the M3xOD5mmXL4mm brass inserts into the Dri-Cell.</li><li>Use the M3x10mm screws to secure the grill cover to the Dri-Cell when in use.</li><li>Insert Dri-Cell into CU-case to check fitting. If fitting is an issue, you will need to reprint the grill cover with more elephant-foot compensation (0.18mm)</li><li>If the fitting is good, press fit 2 Ø6mmxL3mm magnets into the Dri-cell.<ul><li>Please ensure the polarity of the magnets is in the same direction. <strong>(VERY IMPORTANT).</strong></li><li>The holes are supposed to be tight (Ø6.1mm) , I use a mallet to tap them in.</li><li>The Dri-Cell holds up to 60 grams of silica desiccant which for me can last around 3 weeks.</li></ul></li></ol><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_c48f8a8fc7b71.png"><figcaption>1</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_9d2a2a81b3149.png"><figcaption>2</figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_0d932618cbc42.png"><figcaption>3</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_acacbfdabb841.png"><figcaption>4</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><ol><li>Insert the CU-case into the CU-case magnet rig</li><li>Place the setup on a solid table to press fit 2 Ø6mmxL3mm magnets into the CU-case.</li><li>Please ensure the polarity of the magnets is in the same direction and attracts the Dri-Cell.<ul><li>These magnets are what keep the Dri-Cell firmly attached to the CU-case. <strong>(VERY IMPORTANT).</strong></li><li>The holes are designed at Ø6.2mm, I use a mallet to tap them in.</li><li>If they happen to be loose-fitting, use super glue.</li></ul></li><li>Install the PC4-M10 pneumatic coupler and insert the 120mm PTFE tube thru the coupler.</li><li>Use the ptfe tube rig to cut 4 pcs of 72mm each. These tubes will act as rollers for the spool.</li><li>Use a 4mm drill bit to push thru the 4 roller holes on the CU-case to remove the single-layer support (optional)</li><li>Inset the ptfe tube into the holes.</li><li>Ensure that the ptfe tube is flush to the edge.</li></ol><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_ddf4ec6a0f75.png"><figcaption>1</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_8afe4cc5dfe68.png"><figcaption>2</figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_c6447598a8eed.png"><figcaption>3</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_e83df434604b.png"><figcaption>4</figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-10_009add9b093e8.png"><figcaption>5</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_149e32398a77.png"><figcaption>6</figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-21_1a3e6bb3e3e18.png"><figcaption>7</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-10_70118446991aa.png"><figcaption>8</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>Images below show how to install the spool into the CUE and onto the bracket.</p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-22_1f77eee5bd7b1.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-22_b764e8fb942ce.png"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/648695/2024-01-22_433c74edc0242.gif"></figure><p>&nbsp;</p><p>&nbsp;</p><p>It might take a while to get used to loading and unloading filament. I have testing it for a month now (different prototypes and the first release). So far it has been keeping my filament relatively dry. All the best and happy printing.</p><p>&nbsp;</p><h3>CONCLUSION</h3><p>To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like my designs and wish to contribute to my coffee addiction & help fund the filaments and materials needed for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated.</p><p>&nbsp;</p><h3><strong>CAVEAT</strong></h3><p>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

CUE - single spool passive drybox top mount for Bambu Lab A1 & A1mini, Prusa Mk3/4 & Prusa mini

Prusa MK3

Prusa Mini

quadracerjr33

<p>UPDATE 3/23/24  Crossbeam added for easier spool changes and adding a guide.    One works fine   20g    2 will increase stiffness of setup allot.</p><p>&nbsp;</p><p>This is a Spool Holder I designed to top mount onto the K1 Max for printing Tpu or any other flexible filament. Will also work with anything else you can print without the lid.</p><p>&nbsp;</p><p>spool to print head is 100mm so fairly low profile  adding only 300mm total height to the machine (roughly 12")</p><p>&nbsp;</p><p>Requires a 300mm build plate to print (ideally on your K1 Max, Unless you stand them on the sides and turn them at an angle and print with supports Doing so all 4 pieces could be made on a single build plate on a 256 plate.</p><p>&nbsp;</p><p>Filament sensor will need a small piece of filament slid into it or chose ignore filament runout sensor warning.</p><p>&nbsp;</p><p>Bearings needed will be 608 bearings. They don't fit loose but also aren't press fit i used a small dab of glue to ensure they stay on the roller.</p><p>Print two of the stands, they are the same left/right and do not need to be mirrored.</p><p>&nbsp;</p><p>Under 200g filament usage. small amount of supports are needed for roller and roller housing.</p><p>&nbsp;</p><p>Any material may be used as this will be above the machine even pla will hold up.</p>

K1 MAX  Top mount bearing Spool Holder For TPU

K1 max

3D Art

<p>Ich habe endlich mein eigenen AMS Aufsatz konstruiert so wie ich es benötige und optisch Cool und praktisch finde.(inspiriert von Ben Levi)</p><p>&nbsp;</p><p>-Größeres Fach für Druckplatten.</p><p>-Sortierte Zubehör Schublade. für nozzle,etc.</p><p>-integriertes LED zum Anschrauben mit M3 Schrauben/Muffen.</p><p>&nbsp;</p><p><span style="color:#E14747;">LED:</span> <a target="_blank" href="https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</a></p><p><span style="color:#E14747;">Gewindeeinsätze M3:</span> <a target="_blank" href="https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694" rel="nofollow noopener">https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694</a></p><p><span style="color:#E14747;">M3 Schrauben:</span> https://www.amazon.de/St%C3%BCck-Linsenkopf-Schrauben-M3x6-Linsenkopfschrauben/dp/B07K7NRDPX/ref=sr_1_2?</p><p>&nbsp;</p><p>I have finally designed my own AMS attachment the way I need it and find it visually cool and practical.(inspired by Ben Levi)</p><p>-Larger compartment for printing plates.</p><p>-Assorted accessories drawer. for nozzle, etc.</p><p>-integrated LED for screwing on with M3 screws/sleeves.</p><p>&nbsp;</p><p>LED: https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</p><p>&nbsp;</p><p>I would like to share my work with you and hope you have fun and enjoy it.</p><p>&nbsp;</p>

AMS Riser Superstructure by 3D Art/ X1/P1

X1/P1

Bambu Lab

<p>This 3D printing model is a hand grip designed to attach to the blade provided with Bambu Lab printers for easy removal of printed objects from the build plate. Its ergonomic design ensures a comfortable and secure grip, and it is optimized for compatibility with Bambu Lab printers.</p>

Bambu Scraper Grip

Made 

peterow

<p>Golden Dragon 2d Art - WALL ART. </p><p>&nbsp;</p><p>You can print in bigger size, just do not scale in Z axis. Only in X and Y axis. </p><p>&nbsp;</p><p>If you do not have ams, please swap filament manually:</p><p>Swap Instructions:</p><p>Start with Black</p><p>At layer #7 (0.64mm) swap to Dark Brown</p><p>At layer #12 (1.04mm) swap to Gold</p><p>At layer #20 (1.68mm) swap to White for the rest.</p><p>&nbsp;</p>

Golden Dragon Wall art 2d Art 

Wall Art 

Brian Dean

<h2><strong>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</strong></h2><h3>PROFILE NOTE</h3><p><strong>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</strong></p><h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol><p>See below for the more detailed update notes.</p><h2><strong>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</strong></h2><p><span style="color:rgb(55,65,81);font-size:16px;">The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.</span></p><h3><strong>Key Features</strong></h3><h4><strong>Dual Dispensers for Perfect Alignment</strong></h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4><strong>Design and Utility</strong></h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4><strong>Ease of Use</strong></h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4><strong>Convenience and Storage</strong></h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4><strong>Customization and Printability</strong></h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4><strong>Visual Guide</strong></h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4><strong>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</strong></h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of <i>Version 5</i></h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol><p>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.</p><p>&nbsp;</p><p>NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.</p><p>&nbsp;</p><p>STEP and STL raw files are included if you do not wish to use the provided profile.</p><h3>Quality Assurance Testing</h3><ul><li><span style="color:rgb(55,65,81);font-size:16px;">All dispenser sizes have been printed by me and extensively tested</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">I have purchased all magnet sizes at significant expense to myself to ensure fit</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit</span><ul><li><span style="color:rgb(55,65,81);font-size:16px;">Multiple iterations of each dispenser were printed and refined</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">Many kilograms of filament and hundreds of hours of print-time were consumed during this process</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">All to ensure the best quality printing and fit-up for each dispenser size</span></li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3><p>Be sure and check out some nice accessories that other folks have created to work with these dispensers.</p><ul><li><strong>Tip Caps</strong> - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li><strong>Vertical Workbench Stand</strong> - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li><strong>Vertical Workbench Stand (parametric)</strong> - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3><strong>Version 2: 2023-11-20</strong></h3><p>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.</p><ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

Embedded Magnet Dispenser Tool for 3D Prints

Functional

iprintshit

<p>LED Spotlight for Wall Displays and more! Prints everything on one bed and includes minimal assembly! Some double sided tape will be needed for installation. Uses Bambus LED Lamp Kit-001 as the light source!</p>

LED Spotlight for Bambu LED Lamp Kit 001

Electronic Projects

twgondeck

<p>It's a maze! It's a cube! It's surprisingly addictive.</p><p>&nbsp;</p><p>Fits 3/8" ball bearing (anything smaller than 10mm). Print one of each corner and 6 brackets. Corners are labeled, just match up the letters to the corresponding corners.</p><p>&nbsp;</p><p>I also made a set that is pre-supported to help make sure they don't fall over while printing.</p>

A-Maze-Ing Cube

KENPRINT

<p>Mario Bros question mark block </p><p>compatible with Gridfinity</p><p>&nbsp;</p><p>Check my other items for other gridfinity blocks</p>

Mario Block Gridfinity

Containers

TwistyPrints

<p>Keep in mind that the purchase of this model <strong>does not include a commercial license</strong>. If you want to sell prints of our models ,get all our creations in <strong>early access</strong> and <strong>exclusive models</strong> take a look at our <strong>Patreon</strong> Page!</p><p>⭐ ⭐⭐<a target="_blank" href="https://www.patreon.com/user?u=81262195" rel="nofollow noopener">https://www.patreon.com/user?u=81262195</a> ⭐⭐⭐<br><br>Follow us on instagram to stay updated about new models !</p><p>-<a target="_blank" href="https://www.instagram.com/twisty_prints/" rel="nofollow noopener">https://www.instagram.com/twisty_prints/</a></p>

Creepy Doll wall mount

Characters

OlleMark

<p>Stubby version available here: <a target="_blank" href="https://makerworld.com/en/models/47864" rel="nofollow noopener">https://makerworld.com/en/models/47864</a></p><p>&nbsp;</p><p><i>Updates:</i></p><p>26-10-2023 - Added size 5.0mm, slightly modified compared to the others because of the size.</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">27-10-2023 - Added size 6.0 and 8.0</span></p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">28-10-2023 - Separated the new 5,6 and 8 sizes from the original in the print profile.</span></p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">05-12-2023 - Removed size 10.0 because it was too weak.</span></p><p>&nbsp;</p><p>Ergonomic <strong>Allen key handles</strong> for multiple common allen key sizes used for 3d printers. More sizes will be added with time.</p><p>&nbsp;</p><p>Every size has it printed on both the bottom and top to easely find the right size.</p><p>&nbsp;</p><p>You can print all of the handles in one color like i did but print the keylock and cap in different sizes to distinguish them from one another.</p><p>&nbsp;</p><p>I printed all of mine on a bambulabs p1p and a flsun v400 with pla from elegoo, filalab and addnorth. I have tested these to the best i could when working on both my flsun v400 and bambulabs p1p and have not had any failures with this version.</p><p>&nbsp;</p><p>There is quite tight tolerances for the allen key to get as little play as possible so it may differ from printer to printer, hole compensation might have to be used if your printers tolerance isnt up to par or if your first layer is a bit too close to the bed. Silk filament does often have bad layer adhesion and could cause very weak prints so for handles that will be used with high forces I would recommend normal pla or slow petg without cooling for a very strong handle.</p><p>&nbsp;</p><p>If you are using the <strong>Honeycomb storage wall</strong> SonderN8 made a great mount for these handles here: https://makerworld.com/sv/models/62412#profileId-64976</p><p>&nbsp;</p><p><strong>My recommendation for printing</strong>:</p><p>print the cap and keylock with the text down and print the handle with the top faced down for a 0 support print. If the handle is going to be used with very high force I would recommend 5 or more walls.</p><p>0.2mm layer height</p><p>0.42mm line width</p><p>no supports</p><p>25% infill and / or 3 or more walls</p><p>A big thank you to everyone that downloads and it would make my day if you upload your make! :D</p>

Allen key handles

Tools

schiko

<p>Just a small box that fits into the small gap in front of the Bambu Lab A1 mini.</p><p>Easy to print, no support.</p>