kevin.dkpcs.granger

Makerspace.Online

For this to work you have to download the casing from my <a target="_blank" href="https://makerworld.com/en/models/148536" rel="nofollow noopener">Business card Embosser (LINK!)</a> As many requested, the CAT Rollers for the Business card embosser! More rollers will be added in the furure! Keep an eye on my page or follow my instagram! Note: This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product.

CAT PATTERN -  Business Card Embosser

Your Wife

iLab 3D

A portrait of “V” from “V for Vendetta”&nbsp;There are 2 profiles: one with AMS and one without AMS. For the one without AMS, the automatic pause for manual filament change is already inserted.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm, 1 loop.Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 (slot 1 for those who use AMS) PLA+ Sunlu Red Transmission Distance: 6 (slot 2) PLA+ Sunlu White Transmission Distance: 5 (slot 3)&nbsp;Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #12 (1.04mm) swap to White for the rest.

V for Vendetta  - only 3 colors - HueForge

Hueforge

Byrd Anthony

An old angular grip that I converted years ago for an airsoft gun that I had. I redid the process in Fusion360 and gave it a shot at printing with Bambu Carbon PLA.

Angular Grip

Gun Stuff

cyanidesugar

Can it do the Kessel Run in 12 parsecs? Who knows?! &nbsp;This is a fairly simple print-in-place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises 4 filament colours, 3 for the Hueforge print, and one for the Millennium Falcon. &nbsp;If you are using the one-click 3MF file on Makerworld, all appropriate settings have been applied to the print. If you are not using the one-click printing method, or are NOT using a Bambu printer, see the print instructions below: &nbsp;Print Instructions: <ol><li>Print the hueforge print (0mm - 2.08mm) at 100% infill.</li><li>The Millennium Falcon portion of the print (2.08mm - 80mm) should be printed at 10% infill, with 3 wall loops, 3 top and bottom surfaces. I used a layer height of 0.16mm.</li><li>You can achieve this by using a layer height modifier in your slicer to modify layers 2.08mm-80mm.</li><li>You do not need any supports for this print. </li><li>I used Burnt Titanium as the background for the print, but you can use any variation of a dark or black colour.</li><li>I used Polymaker's Starlight Mercury for the Millennium Falcon, but you can use any gray or silver variant, or whatever you like!</li></ol>Filament Swaps: &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm&nbsp;Filaments Used: - PLA Flashforge Burnt Titanium Transmission Distance: 2.5 - (You can use black!) - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA Kingroon White Transmission Distance: 8- PLA Polymaker Starlight Mercury (This is for the Millennium Falcon!)&nbsp;Swap Instructions: - Start with Burnt Titanium - At layer #7 (0.68mm) swap to Teal - At layer #11 (1mm) swap to White- At layer #23 (1.96) swap to Starlight Mercury (this is the Falcon!)&nbsp;The wonderful Millennium Falcon model was sourced from <a target="_blank" href="https://www.printables.com/model/212461-fillenium-malcon-improved" rel="nofollow noopener">here</a> by <a target="_blank" href="https://www.printables.com/@Gareth42_280557" rel="nofollow noopener">Gareth42</a>. If you haven't yet, you should definitely print the standalone model, because it it marvellous! &nbsp;Have fun, and let me know how you go with the print! &nbsp;____________________________________ Commercial License to Sell PrintsIf you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my <a target="_blank" href="https://patreon.com/cyanidesugar3DP?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener">Patreon</a>! ____________________________________&nbsp;

Piece of Junk in Space - Hueforge Hybrid Print

Cool Decor

Hamstah

Update 25/11/2023: I've added stronger versions of all 3 sizes. Some people were having difficulty printing the original model, so I've increased the height and thickened the links to give the model quite a bit more strength. The trade off is that the model is slightly less flexible, but definitely still a lot of fun to play with. Hope that helps!--&nbsp;Dual sided triangle “chain mail” style fabric. Fun to play with! I recommend printing the tester first, as it is really important that the filament adheres well to the bed for a good print. If one triangle gets knocked off the bed, it can ruin the print (though I have had success if one or two get knocked loose).&nbsp;The easier model to print (and more fun in my opinion) is the 120mm square, but I included a 250mm wide strip for those that want more of it.&nbsp;I also highly recommend using a plastic scraper to remove the print from the bed, and you won't be able to get the fabric to release by bending the bed, and pulling on the fabric will snap the joints.&nbsp;Consider changing filament on the middle layer to get a second colour on the flip side of the fabric!&nbsp;Warning: The 250mm wide version of the fabric takes a very long time to slice!

Fabric Fidget

Fabric???

Benjamin Kott

Please refer to the description for print times and filament requirements. The available build plates include all components for both upper and under desk variations in each size. You have the flexibility to print only what suits your needs.<h2>Modular Desk Drawer with Fusion 360 Source Files.</h2>Whether you prefer a hassle-free printing experience or enjoy tinkering with customization, this desk drawer provides both options. Utilize the available print profiles for specific sizes or dive into the Fusion 360 file to explore a range of customizable parameters. The model is intelligently designed, automatically calculating and evenly spacing the pattern on the front. Say goodbye to manual adjustments – simply define the basic parameters and witness the magic of automated calculations! 😊<h3>Introduction</h3>Facing desk clutter and a lack of space, I sought a solution beyond traditional boxes. Constantly shuffling items between surfaces became tiresome, prompting me to design a drawer that blends seamlessly with my workspace.&nbsp;Seeking simplicity and functionality, I aimed for a design that integrates smoothly with my surroundings. As a programmer, gamer, and hobbyist, I spend countless hours at my desk, so creating an environment that fosters productivity and minimizes stress was paramount.&nbsp;Drawing on community feedback, I refined the model to meet practical needs, resulting in features like stackability, pull-out protection, on-desk usage, and optional handles. Although delicate, these enhancements elevate usability and aesthetics.&nbsp;I invite you to share your thoughts and contribute ideas for improvement. Your feedback is invaluable in shaping future iterations.<h3>Description</h3>The choice is yours: utilize it as a desk drawer or mount it beneath your desk for additional surface area. Engineered for seamless operation, the drawers feature rounded corners and rails to minimize surface drag resistance, ensuring smooth functionality. Built-in pull-out protection prevents accidental drawer removal, safeguarding your belongings from falling. If needed, the drawers can still be easily removed. With ample surface area, tape can be used for mounting; alternatively, angled boreholes allow for secure screwing underneath your desk for added stability. Two case options are available: one offers a sleek appearance even from the sides, while the other facilitates stacking and connecting multiple units using connectors for enhanced rigidity. Finally, a base and top cover complete the look, transforming it into an on-desk drawer and concealing any holes as desired. <figure class="table" style="width:97.18%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="width:50%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_c93f158139fe1.jpg"></figure>Under Desk Drawer Mode</td><td style="width:50%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_d899642f12e4.jpg"></figure>Upper Desk Drawer Mode</td></tr></tbody></table></figure><h3>Demo v1</h3>This demo showcases the behavior of the initial iteration. While the video needs to be updated, it offers a glimpse into the capabilities of the Fusion 360 sources.<figure class="media"><div data-oembed-url="https://youtu.be/JAgiqoJdaw8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/JAgiqoJdaw8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Customizable Parameters:</h3><ul><li>Height</li><li>Width</li><li>Length</li><li>Wall</li></ul><h3>Printing</h3>Printing this model is simple; there are no special requirements. Minimal support is provided for the large holes underneath the case, which can be disabled if desired, though it enhances their appearance and makes them easy to remove. Additionally, there is minimal support for the pull-out clamps on the drawer, which are essential; removing them would result in printing in mid-air.<h3>Print Times & Filament</h3><h4>Under Desk Drawer</h4><figure class="table" style="width:100%;"><table><thead><tr><th>Variant</th><th> </th></tr></thead><tbody><tr><th style="width:200px;">100x140x32 mm</th><td>~3.2 h ~136g Filament</td></tr><tr><th style="width:200px;">160x100x42 mm</th><td>~4.1 h ~182 g Filament</td></tr><tr><th style="width:200px;">220x160x42 mm</th><td>~7h ~346 g Filament</td></tr></tbody></table></figure>1x Drawer, 1x Holder Plain<h4>Upper Desk Drawer</h4><figure class="table" style="width:100%;"><table><tbody><tr><th style="width:200px;">Variant</th><td> </td></tr><tr><th style="width:200px;">100x140x32 mm</th><td>~9h ~349g Filament</td></tr><tr><th style="width:200px;">160x100x42 mm</th><td>~11h ~443g Filament</td></tr><tr><th style="width:200px;">220x160x42 mm</th><td>~17h ~816g Filament</td></tr></tbody></table></figure>2x Drawer, 2x Handle, 2x Holder Stackable, 4x Connectors, 1x Base, 1x Top<h3>Installation</h3><h4>Under Desk Drawer <img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_7e35b5b67fbaf.jpg"></h4>Secure this under-desk drawer to your table's underside using Countersunk screws (refer to recommendations). Ensure the screws sit flush for optimal stability. For a smooth installation, consider predrilling holes before mounting. Enjoy a sturdy and functional addition to your workspace! Alternatively, use tape for a hassle-free attachment— the ample surface area makes it suitable. <img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_b8c3f05ece19a.jpg">&nbsp;Check Screw Recommendations / Tape Recommendations.&nbsp;Partslist Example<ul><li>1 Drawer</li><li>1 Holder Plain</li><li>4 Screws / Strong Double Sided Tape </li></ul><h4>Upper Desk Drawer:</h4><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_e1d73468305ae.jpg"> Partslist Example:<ul><li>1 Base</li><li>1 Top</li><li>2 Drawer</li><li>2 Holder Stacking</li><li>2 Handles</li><li>4 Connectors</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_a598f2f3689da.jpg"></figure>Add the connectors into the holes on the holder. They are press-fit, so you need to apply some force. After you insert them on one side hold them together and repeat the stop on the opposite side.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_bfe29f66d8cad.jpg"></figure>You can then simply put them onto the base, and add the top. Please note: The base and top only COVER the holes, there is no direct connection. The covers are very small and brittle. Once added nothing will happen to them. If you want a forced connection I recommend gluing them onto the Holders.&nbsp;<h4>Optional Handle:</h4>Apply firm and even pressure to the handle, pressing it into the grip area. The layer lines on the handle create a tight and secure fit. Use controlled force to avoid any damage to the handle or the drawer. If you desire additional stability, you can optionally apply some glue around the base of the handle. Ensure the glue is evenly distributed for a secure bond. If you haven't used glue and need to remove or replace the handle, gently wiggle it out of the grip area.<figure class="table" style="width:100%;"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_8e1e3a0603e1e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_41a67c3fba9d3.jpg"></figure></td></tr></tbody></table></figure><h4>Screw Recommendations:</h4>With the lowered back, there's increased flexibility for screws that aren't perfectly flat. The cutout is designed for 8mm diameter screws, accommodating 4x something mm screws snugly. While 3.5x and 3mm will work, the latter leans towards the flimsy side.<ul><li>Spax 4x16 mm - TIGHT! <a target="_blank" href="https://amzn.eu/d/8YUU522" rel="nofollow noopener">https://amzn.eu/d/8YUU522</a></li><li>Spax 3.5x16 mm - OK! <a target="_blank" href="https://amzn.eu/d/by5afRT" rel="nofollow noopener">https://amzn.eu/d/by5afRT</a></li><li>Spax 3.0x16mm - Flimsy <a target="_blank" href="https://amzn.eu/d/iOn9AWF" rel="nofollow noopener">https://amzn.eu/d/iOn9AWF</a></li></ul>Tape Recommendations: When taping it to the underside of your desk, invest in quality tape designed for this purpose. I recommend 3M VHB 4611; a small amount goes a long way. Choose your placement wisely because once it adheres, it stays securely in place.<ul><li>3M VHB 4611 <a target="_blank" href="https://amzn.eu/d/buqRvMa" rel="nofollow noopener">https://amzn.eu/d/buqRvMa</a></li></ul><h3>Timelapse v1</h3>This video is still showing a timelapse of the first iteration.<figure class="media"><div data-oembed-url="https://youtu.be/JmUWZjHJkQw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/JmUWZjHJkQw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>Updates</h3>For updates, all original STL files, the Fusion 360 file, and my print profiles will be refreshed. Before printing, please ensure the accuracy of the profiles not provided by me.<h4>28.01.2024 - Release v3</h4>I want to express my gratitude to everyone who provided feedback on the model. Consolidating all the input, it took some time, but as I continue to learn CAD and Fusion 360, and with around four months of 3D printing experience, I'm pleased to share an improved model. Despite the increased print time and filament usage, the updated version is now significantly sturdier and more reliable, enhancing the overall feel when using the drawer. 😊&nbsp;I'm actively updating the description to reflect these changes. However, I wanted to release the model files promptly to address the layer adhesion problem that some users encountered. Your support is greatly appreciated! <img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-01-28_1fd67753fba56.jpg">&nbsp;<ul><li>Height Adjustment You may observe a 2mm height increase – no worries, existing drawers remain compatible. The added height accommodates the new holder design, providing a snug fit around the drawer.</li><li>Holder Upgrade The holder is now enclosed, resolving previous layer adhesion issues. Print vertically for enhanced stability and rigidity. Bonus: Easily install with double-sided tape.</li><li>Holder Variants Responding to user requests, two holder variants are available. Choose between a sleek variant for mounting below the desk or a stackable version with connectors.</li><li>Pull-Out Protection Introducing a "pull-out" protection feature. While you can still pull it out, you'll experience minimal resistance. The strategically placed stopper ensures enough drawer remains in the holder.</li><li>Additional Features Added a Top Cover for desk drawer use. Included a Base for elevating the drawer.</li></ul>Enjoy the enhanced functionality and versatility of the updated release! Feel free to reach out with any questions or feedback.<h4>27.01.2024</h4><ul><li>Added an optional Handle</li></ul><h4>21.01.2024 - Release v2</h4>Based on Feedback the models were slightly adjusted. These improvements are compatible with previous printed parts. That means you can replace the mount or the drawer and keep the other one.<ol><li>I get that it´s tough to have the right screws at hand. The back of the drawer was lowered by 3mm to allow screws not to sit 100% flat flush and have a bit more room.</li><li>The back of the mount is now reinforced. It is now a little bit taller than before and has cross struts on both sides to make the mount more rigid.</li><li>I increased the walls to 3 and the bottom layers to 5, this will make a more solid infill and also increase the rigidity.</li></ol><h3>More Fusion 360 Parameterized Models</h3><ul><li>Organizer Box <a target="_blank" href="https://makerworld.com/en/models/103266" rel="nofollow noopener">https://makerworld.com/en/models/103266</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Stackable Storage Bin <a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">https://makerworld.com/en/models/114250</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li></ul>

Desk Drawer Modular

Office Stuff

Sandholm

Egg Dispenser by Ljhtom, BambuStudio -Ready! -Always have fresh eggs, thanks to this dispenser, fill the dispenser with 12 XL size eggs, maybe 13 or 14 other sizes. -(TPU) Optional anti-fall stop and slowdown stop, it is not necessary, but it gives more security . -Glue and assembly needed -72mm wide / 296mm deep / 151mm tall. Made by: “Ljhtom” on Thingaverse and Printables 10% Infill (grid, for more strength) 0,2mm LH 2 walls 0,4 nozzle

Egg Dispenser by ljhtom

Cool house stuff

Haix3D

Hey,&nbsp;since the cleaning with several paper towels has always annoyed me, I have designed this small but helpful tool. You just click it into the Lead Screw and move the Z axis completely. If the lead screws are very dirty, you can repeat the procedure.The tool fits all printers that have a standard 8mm lead screw installed. So basically with all common 3d printers.You should print the tool as fine as possible. The highest layer height should be maximum 0.2mm. The finer the part is printed, the better the cleaning effect. Perfect results are achieved with Bambu Lab 0.08mm layer height.&nbsp;Your printer must also be well calibrated so that the tool fits correctly into the lead screw. It is normal that the part must be clicked quite tightly.&nbsp;If you have any questions or suggestions for improvement, please let me know.