karts499

0_Tuli_0

Logo Mercedes Benz o veliksoti 250mm

Logo Mercedes Benz

deko

πxel8ed

Started with designing a “ship in a bottle”. Ended up with this.&nbsp;Updates:<ul><li>1/20/2024: Updated model to double the strength of the webs. Check out the “V2” profiles.</li><li>1/16/2024: Uploaded a few tweaks to the Designer Profile (One, two, and three color versions) which enhance small details on the ship and improve print reliability</li><li>12/26/2023: Added “Optional Uplighting Kit” profile. It&#39;s a fast print, compatible with a variety of LED&#39;s and fits nicely. Makes the base of the model more significant so also a nice upgrade to add a contrasting portion to the base. Pick plate one or plate two depending on your preferred LED&#39;s:<ul><li>Plate 1: Fits the LED puck from the <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">Bambu Labs LED Lamp kit</a>.</li><li>Plate 2: Allows the installation of a length of LED light strip (or fairy lights) of various types. If you&#39;re just getting started with custom LED installs <a target="_blank" href="https://youtu.be/exAWzMfmwQ8?si=8TnrTyI9Lngt3264" rel="nofollow noopener">check this video out</a>.</li><li>Plate 3: Includes a lens that fits in the model base to diffuse the light from the LED&#39;s. The Bambu LED is very bright so I prefer printing the lens in white or colored PLA rather than translucent.</li></ul></li></ul>The Designer Profile (One, two, and three color versions) supports all Bambu Lab printers. Just make sure the Designer Profile is selected in Bambu Handy, click Print, then select the plate you want. If you instead open it in Bambu Studio you may need to select your printer model at the top left dropdown and choose to transfer all settings before slicing and sending to the printer.<ul><li>One color takes ~7hrs</li><li>Two color takes ~8hrs</li><li>Three color takes ~24hrs!</li></ul>Big thanks to <a target="_blank" href="https://makerworld.com/en/u/319145709" rel="nofollow noopener">@zviratko</a> for figuring out a work around to make one color prints reliable.&nbsp;Suggestions on removing support material if it does not just pop off initially:First, be sure to let it cool down completely before attempting to remove the support. We want it to be stiff, not flexible.When removing the support; hold the ship portion of the model firmly with one hand, with the other hand use the biggest needle nose pliers you can to grab the support chunk from the bottom where it was attached to the build plate. Make sure you have a firm grip and twist the pliers clockwise/counter-clockwise then pull straight out. Take your time. Don&#39;t expect it to pop off in one go. You&#39;re just hoping to cause some cracking noises. Then move the pliers to a different spot and repeat the twist/pull to hopefully create some more cracking noises. You&#39;re trying to achieve the same effect as when you bend a paperclip back and forth until it breaks. Eventually the support will come loose, just be patient.&nbsp;Enjoy!

A long time ago in a galaxy far, far away....

eins

Emashi

Thats the model of heart made from “ANAL?” word. Its a humoristic valentine.&nbsp;

Anti Valentine's day heart - ANAL? pendant

shit

Bukaj

Enjoy it and be carefull.&nbsp;There is link to V2  <a target="_blank" href="https://makerworld.com/en/models/463005#profileId-371523" rel="nofollow noopener">Box opener V2 (shuriken) by Bukaj - MakerWorld</a> its a bit better

Box opener

geek

DatumCAD

***Edit 09/05/2024*** - Slight reduction to overall tolerances to make for size to allow for snug alignment of the front/back plates, as well as small change to overall shape to allow storage in Mitutoyo Caliper box (see second image). Thanks in particular to @Spoonier for their comment about this!&nbsp;This is an adaptor that can be quickly attached to any standard set of 16mm wide Digital Calipers (that&#39;s most of them!).&nbsp;It provides a lockable depth base, that dramatically increases the span of the caliper bottom and makes measuring (using the caliper depth sword) much easier. Effectively allowing you to obtain measurements for objects / features that were previously very difficult or even impossible.&nbsp;All items print with zero support. No need for metal fasteners as the knurled thumb screws are all printed too and are more than up to the job.&nbsp;Assembly: The adaptor plates index together &amp; are secured to the calipers with use of the two longer knurled bolts (from the back) and then the shorter knurled locking bolt can be inserted from the front and tightened down onto the face of the caliper. See exploded assembly BOM.&nbsp;Set zero &amp; use: Simply slide down flush with the end calipers, fully tighten the locking bolt. This is best done on a flat surface like a table top. Now you can slide the caliper as per norm…. but with improved 75mm wide base to measure away from.&nbsp;I have tested all at 0.16 layer height and 0.2mm also and both work well. Uploaded print profile at the higher resolution along with change of colour for the thumbscrews as it just looks better that way :) Enjoy printing and I hope this increases measuring bliss for you too!&nbsp;I love designing for 3D printing, please take a look at all my other models which are all free (and will always continue to be)… if you value any of the downloads enough &amp; are able to support me, then please consider buying me a coffee to keep me going! <a target="_blank" href="https://www.buymeacoffee.com/DatumCAD" rel="nofollow noopener">www.buymeacoffee.com/DatumCAD</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000209096/design/2024-02-27_b3d6e503cbba8.png"></figure>***Minor Edit 28/02/2024*** - Not required for most, but I have updated ‘Knurled Screw (Lock)’ to be 5mm long (previously 4mm) as some have reported that cheaper calipers can be a little thinner and so need the extra length. If you have the older version and struggling to get things reasonably tight, then perhaps just try reprinting this one item which I am now making the standard going forward.

deko

eins

shit

geek

nice2have