Kanrog87

Put a BIQU Microprobe on your Sentinel! The spacer is there if your fan is like mine and sticks out slightly. All files are ready to print, no supports needed. No heatsets, I use M3x6 to attach the probe, the M2.5 that comes with the probe also works. The lower two fan-screws are not needed for this to work. You need to add some lines into your printer.cfg to make sure this works, ive uploaded them <a href="https://github.com/Kanrog/Rook-2020-MK1/blob/main/Klipper%20Config/microprobe.cfg" rel="nofollow">HERE</a>. make sure to copy the contents of the file into your printer.cfg. This has the pins for a SKR Mini E3 V3, might need to change pins to match your board. You might need to play around with the mesh max and min to get it to your liking. <a href="https://ko-fi.com/kanrog" rel="nofollow">Like my work? Support me on Ko-fi!</a><a href="https://linktr.ee/kanrogcreations" rel="nofollow">Linktree</a>

Sentinel BIQU Microprobe

Rook 2020 mods

Bastion/180 mods

I was looking for a simple handle for a standard Stanley blade, and I could not find what I wanted, so I made my own. I've been using one of these for over a year to scrape the beds of my printers and other stuff around the workshop, and it has never failed me. Given I've used it for such a long time, i figured I might as well share the file for it. To assemble this, you need: 1x Stanley blade 2x M3x4 bolt 2x M3 nuts Its oriented, ready to print, no supports. 0.2 layers, 4 walls and 30% infill recommended. Would not recommend higher layers, as this breaks the built in supports for the nuts. <a href="https://ko-fi.com/kanrog" rel="nofollow">Like my work? Support me on Ko-fi!</a><a href="https://linktr.ee/kanrogcreations" rel="nofollow">Linktree</a>

Stanley Blade Scraper

Tools

Rook mods

I wanted to elevate my LED mount on top of my aquarium to make rook for more plants above the water, so I've made a modular system that lets you do just that. The clamp uses 2 M3 screws and nuts to clamp onto the glass using a small wedge to prevent it from breaking the glass. You need 2x wedges per clamp. All modules are attached with M3 screws and nuts. This fits up to 6mm glass. I included the step if you want to make your own modules. (My LED bar has a foot-spacing of 85mm, so the mount is made 88mm wide to fit it, you can remix it if you need to, or contact me if you need a custom led-mount.

Rook 2020 mods

Bastion/180 mods

Tools

Rook mods

Aquarium