咔嚓

apex3D

I owned Thule backpack for almost 10 years or so. It is by far my favorite and durable one. After some time my zippers started to break which is shame, because I absolutely love how they feel and look.<figure class="image image_resized" style="width:51.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/778097/2024-03-28_f205cfc82d816.jpg"></figure>&nbsp;I could not find them anywhere so I purchased small roll of TPU and got designing.<h4>DESIGN</h4>It is heavily inspired as you can see, just optimized for 3D printing. Originally I wanted to utilize the metal part for durability, however it is not ideal and was worried about how well it would hold with overprinting so I designed it from scratch.<figure class="image image_resized" style="width:49.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/778097/2024-03-28_7b84aa4ed59ed.jpg"></figure>For the inside part I would recommend to use ASA if you plan to wear it a lot (due to UV), however I did not have the roll and went for PETG, PLA should be fine as well. In case they fail, I might tweak the design a bit or print it from other material.&nbsp;The flexible outside I printed from TPU so have the same feeling as original and I have to say it is very close.&nbsp;PRINTING<ol><li>Print the first plate from ASA, PETG or PLA</li><li>If the top surface is not perfect due to material tuning, just sand it a bit so it is flat and smooth</li><li>Print the second plate from TPU</li><li>Print will pause automatically</li><li>Insert the inside part into it and hit continue</li><li>That's it, part should come out real great and you can install it on your backpack</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/778097/2024-03-28_d6ab224d6b2b8.gif"></figure>

Thule Zipper

拉链

GUANYYYYY

2024.04.30更新内容：经过打印测试优化，将模型进行了细微调整，去除了图片红圈处的凸起，请注意此处修改！After printing, testing, and optimization, the model has been finely adjusted to remove the protrusions in the red circles of the image. Please note the modifications made here!<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438058/design/2024-04-30_cec2339d40435.png"></figure>另外，新增了一个更小尺寸的固定器，有需要的可以下载第 2 个配置进行打印。In addition, a new smaller size retainer has been added. People in need can download the second configuration for printing.&nbsp;尺寸是：20 x 50 x 6 mmSize：20 x 50 x 6 mm<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438058/design/2024-04-30_35d360f97795f.jpg"></figure>&nbsp;2024.04.21描述内容：无需支撑直接打印建议使用3M双面胶固定请确保双面胶固定牢固后使用<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438058/design/2024-04-28_2292eae995271.jpg"></figure> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438058/design/2024-04-28_5068dbf6830c9.jpg">&nbsp;&nbsp;

Power Strip holder / 插排固定器

生活收纳

Reckit

Sorry it has taken so long - added an official Apple MagSafe version &nbsp;&nbsp;The MagSafe stand is designed to hold the phone with or without a case. The accent for the sides is printed separately and fitted in after being printed.&nbsp;MagSafe puck I used for this design is&nbsp;UK - <a target="_blank" href="https://www.amazon.co.uk/Certified-Wireless-Magnetic-Pro%EF%BC%8CiPhone-Charger%EF%BC%8CSilver-15W-USB-C-MagSafe-Charger/dp/B0CQ64NNWB/ref=sr_1_1_sspa?crid=124R5H0I1Q1D2&keywords=apple+magsafe+charger&qid=1704883054&sprefix=apple+ma%2Caps%2C94&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1" rel="nofollow noopener">https://www.amazon.co.uk/Certified-Wireless-Magnetic-Pro%EF%BC%8CiPhone-Charger%EF%BC%8CSilver-15W-USB-C-MagSafe-Charger/dp/B0CQ64NNWB/ref=sr_1_1_sspa?crid=124R5H0I1Q1D2&keywords=apple+magsafe+charger&qid=1704883054&sprefix=apple+ma%2Caps%2C94&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1</a>&nbsp;Magsafe puck needs to be secured with double-side tape  &nbsp;Hopefully, the dimensions for other models will be similar.&nbsp;No AMS is needed for dual-color print.&nbsp;The accent is a push-fit design that fits into the side profile and then wraps around the top of the stand to be fitted on the other side.&nbsp;It took a while to get this correct and the only way I could get a seamless tidy fit was to print the wrap-around section at the height of 3 layers printed at 0.16mm. This gives enough flexibility but can crease if not assembled correctly.&nbsp;It is recommended to fit one side flush into the stand and then carefully wrap around the top profile before securing into the other side. I think it works quite well but any feedback on the accent design would be welcome.  I also recommend using my print profile for the stand itself or make sure you print at 0.12mm (first layer 0.16mm) with tree supports. This will ensure that the radius closest to the bed prints as well as possible.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Accent should be printed at 0.16mm with 4 wall loops for it to work correctly, I found a brim wasn't necessary (but it's up to you). I would recommend turning off the Aux fan on P1S and X1 printers to prevent it from warping when printing in PLA.&nbsp;I tried a square design with a radius but this doesn't allow you to rotate the phone from portrait to landscape (or vice-versa) without it fowling on the camera bump. However, if you want a version like that then it can be done and it makes the accent design and printing quality to be flawless.&nbsp;If you like this design I also have a version without MagSafe and an Apple watch Stand to complete the range.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/127277#profileId-137702" rel="nofollow noopener">https://makerworld.com/en/models/127277#profileId-137702</a> &nbsp;<figure class="image image_resized" style="width:50.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/644207/2024-01-10_92ab11fb56c3f.jpeg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/137254#profileId-149348" rel="nofollow noopener">https://makerworld.com/en/models/137254#profileId-149348</a>&nbsp;<figure class="image image_resized" style="width:50.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/644207/2024-01-13_085a75b85b1f6.jpeg"></figure>

拉链

生活收纳

手机