kRCorp

Fletch

One of the first games I ever played and a classic. I thought it would be cool to have the first level of Pac-Man printed out in a nice display for the game room. The frame has a hole in the back for hanging on a wall or you can print out a stand.&nbsp;The letters, Pac-Man, and dots came out better on the 0.2mm nozzle as you can see in the comparison photo. The 0.4mm nozzle still looks great!&nbsp;The ghosts are on separate plates to reduce print time and wasted filament. Just press them into place on the main model.&nbsp;You can find a stand for displaying on a bookshelf here:<a target="_blank" href="https://makerworld.com/en/models/456210" rel="nofollow noopener">Frame Display Stand</a>&nbsp;ColorsBlack - Bambu PLA BlackWhite - Bambu PLA WhiteBlue - Hatchbox PLA BlueYellow - Bambu PLA YellowPeach - Polymaker PLA Matte Light OrangeRed - Bambu PLA RedOrange - Bambu PLA OrangePink - Elegoo PLA PinkCyan - Elegoo PLA Sky Blue

Pac-Man Level 1

Games

The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.&nbsp;This model should fit all Bambu printers. You will need to move the model to the corner on the A1 mini to fit both the model and prime tower.&nbsp;Update 3/14/24 - <a target="_blank" href="https://makerworld.com/en/models/254506" rel="nofollow noopener">Added a stand to display the Saturn V rocket that can be found here</a>.&nbsp;NotesThe antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.&nbsp;Assembly<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_0c0b17411535b8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_88e6226af64dd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c99b1d1591bfb.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c63a7fd7539ff8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_725c5a900205e8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_a0f5646572fbd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_38eaf64fc600e.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_bf8c15a68b8df8.jpg">

NASA Saturn V Kit Card

Science

julianfj

LED lamp of the cartoon version of our beloved slimer, prepared to hang on the wall and with a line on the side that gives it a very cool touch. It is positioned to maximize size so you will have to be sure to remove the purge line.It is recommended to line the interior with reflective tape and place some powerful LEDs.&nbsp;print and have fun!&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=a-0fu7N1O9A"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/a-0fu7N1O9A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;-------&nbsp;&nbsp;Lámpara led de la version de dibujos animados de nuestro querido moquete de los cazafantasmas, preparada para colgar en la pared y con una linea en el lateral que le da un toque muy cool. Está colocado para maximizar el tamaño por lo que tendrás que asegurarte de quitar la linea de purga.Se recomienda forrar el interior con cinta reflectante y colocar unos leds potentes. Imprime y diviertete!!!&nbsp;

Slimer Ghostbusters LightBox Led Lamp

LightBoxes

djngnear

Sometime tape leaves a nasty residue so I modeled these after my Yellotools' clips. There's 3 sizes in my print profile. The 120mm clip will fit around a 50 yard roll and the 54mm clip is good for smaller rolls like Cricut rolls but you can scale accordingly. The PLA I've printed them in have bent fine around the rolls of vinyl.

Vinyl Roll Clip

Herme

Maker1O1

Flexi-Facehugger orignally made by sh and licensed under CC BY-NCScaled and remixed for AMS by me.

Flexi Facehugger LONGER TAIL!  Xenomorph Alien VS Predator Articulated flexible print in place

Cine

FlorinV

Please use my profile (designer), not sure if other profiles are automatically updated with all my latest changes!Seeing my original model so appreciated: <a target="_blank" href="https://makerworld.com/en/models/82516#profileId-87957" rel="nofollow noopener">https://makerworld.com/en/models/82516#profileId-87957</a>I've decided to make a foldable version together with other changes:&nbsp;<ul><li>Temples and main part connection were redesigned to be foldable and easy to fit together.</li><li>All parts can be printed on one plate without loosing the side logo. The letters are embedded and you can choose a color for each letter. Or print them in the same color, your choice.</li><li>small changes to print profile to make the temples better. Temples looks better now, printed face down on textured plates.</li><li>30 minutes model printing time  </li></ul>&nbsp;UPDATE 11.12.2023 (please use my profile, not sure if other profiles are automatically updated):<ul><li>I have modified the temples (arms) to open more. (to stop the glasses from bending too much in the middle</li><li>Also increased the thickness of the white squares, to have 3 layers. As someone suggested the white could be semitransparent in some cases. Also this increase the overall thickness of the glasses.</li><li>Added a small reinforcement to the top part of the frame, to be more strong and bend less. Attaching the temples:</li><li>They have a small groove on exterior side, so they can easily slide in only with a movement like in the picture bellow.  I've tested many times and worked for me, and I hope on other printers works the same. If you feel you need too much force to snap them in, please try to sand very little from the connection pins on the glasses.  </li></ul><figure class="image image_resized" style="width:61.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/283781/2023-12-08_d87c6cfed04c.png"></figure><ul><li>In case you want to open even more the arms (temples), please carefully sand this red part. (not too much :) ) <img src="https://makerworld.bblmw.com/makerworld/draft/283781/2023-12-14_8912b772b0bba.png"></li></ul>

Thug Life Glasses - folding version 

Weareable

Dengamleninja

Wallart - Batman&nbsp;Layer height color settings:&nbsp;0.0 - 2.0mm black pla2.2 - 2.4mm white pla

Wallart - batman

chiz_m

<h3>RELEASE HISTORY</h3>2023-12-17: Thinner version print profile added that may work better for others with printers that don&#39;t have the frames completely flushed. See Tips for Success section below for more details.2023-11-17: Version 2 - now covers the entire length of the lead screw and more rigid. Additionally, magnets can now be added.2023-11-12: Initial Release________________________<h3>If you find that this shield works great for you, pls hit that BOOST button!</h3><h3>PROBLEM</h3>Grease from the z-axis lead screw would often get into hands/arms when getting finished prints from the printer.<h3>SOLUTION</h3>Design a shield that would cover the lead screws but not affect the printer functionality.<h3>IMPORTANT NOTE (Please read first!)</h3>As the tolerances in the assembled unit varies, this lead screw cover might not work on your printer. See item #1 below in the Tips for Success section. The left side of the printer has very little room to fit the shield and if you have a really skewed printer frame, the shield could rub against the print bed assembly. I noticed this difference between the two (2) X1C&#39;s that I have. You can try the thinner version as it might fit better to your unit over the regular version. Lastly, this requires a really calibrated filament for the part to fit. Over extruded filament will cause the part to be thicker and very tight while under extrusion would make the part thin and loose. Please do NOT rate the model low because it didn&#39;t fit well to your unit, which may have really skewed frame or your filament isn&#39;t calibrated correctly. A lot of people have successfully installed this shield and continue to use it today without issues.<h3>PRINTING DIRECTIONS</h3><ol><li>Print as oriented.</li><li>Model has built-in support. Remove supports after printing.</li><li>Part clips to the z-axis lead screw bearing mount. Optional: Add 8x3mm magnets.</li><li>Left and right shield are mirror of each other. Flip in the x-axis in the slicer to print the other. Alternatively, print using the provided left and right profiles.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062988/design/2023-11-17_e498439f53add.png"></figure><h4>TIPS FOR SUCCESS</h4><ol><li>Variances in the unit assembly. I found it myself that there are variances in the assembly of the units that may affect the fit of the shield esp. on the left side. See picture below. You can see on the left (blue) that the lead screw mount is flushed to the vertical post of the frame compared to the one on the right (light brown). This makes the shield pushed against the print bed support and might not fit well. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062988/design/c3bcc624-ac61-4c7f-be2c-e34a4ee3bf82.webp">  </li><li>Curved edge. If you happen to get the printed part from the print bed when it&#39;s not fully cooled down yet, you might have a curved edge. This will cause the print bed support to rub against the curved edge of the shield.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062988/design/bdaca8b8-c292-4044-8224-715515a9ba55.png"></li></ol><h3>MATERIAL RECOMMENDATIONS</h3><ul><li>Use high temperature resistant material like PETG, ASA or ABS as PLA might warp overtime.</li></ul>

X1/X1C Lead Screw Shield

Bambu X1 Carbon

Becca_3D PrinterPets

Split head of Kaijumon Charizard. Designed to be printed on FDM printers and tested on Bambu X1 carbon. Scaled up to fit the maximum build plate volume and orientated to require minimum supports.

Realistic Charizard Dragon Head

Bustos

agepbiz

<figure class="media"><div data-oembed-url="https://youtu.be/Ul6tzKezKa0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Ul6tzKezKa0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Pull Copter Finger Ring Assembled using M2x8 Hex Cap screws.<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a>&nbsp;<h3>Print instructions</h3>0,2mm 30mm/s Support on the ring (I used support only from base)

Pull Copter Finger Ring

Juguetes

Bambu Lab

This 3D printing model is a specialized scraper for removing printed objects from the build plate of a 3D printer. Its sharp and durable edge, ergonomic handle, and versatile design make it a reliable and practical accessory for maintaining the high-quality output of 3D printers.

Bambu Bed Scraper

Tools

K2_Kevin

This is a PTFE tube guide for AMS Buffer outlet to the printers input.Ever have issues where the AMS is not able to feed or retract the filament after a printing or during multiple changes. Straightening out the PTFE tubes path as it enters/exits the buffer or hub has helped resolve this issue for me a lot.&nbsp;UPDATE 11/01/2023: Added new model for use with rear mounted spool holders.&nbsp;Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052179/design/2023-10-29_4b49cf46cc48f.png">&nbsp;&nbsp;<h3>Check out a few other helpful accessories for smooth operation.</h3><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166676" rel="nofollow noopener">Hotend PTFE Guide</a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166676" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052179/design/2024-04-24_752be73a02f9.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/51579#profileId-105225" rel="nofollow noopener">AMS Support Button</a><a target="_blank" href="https://makerworld.com/en/models/51579#profileId-105225" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052179/design/2024-04-01_e1bb7a4ccb38c8.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/93011#profileId-99425" rel="nofollow noopener">PTFE Coupler Support</a><a target="_blank" href="https://makerworld.com/en/models/93011#profileId-99425" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000052179/design/2024-04-01_429aa1362b6ba8.png"></a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Bambu AMS PTFE Buffer Block

giuliolibrando

------------------------------------------------------------------------------------------------------------------------------------------------------------------------<h2>I have released a “V2 version” </h2>Improvements:<ul><li>modular design</li><li>easy color swap</li><li>less pieces</li><li>more flexible</li></ul><h2>Try it here: <a target="_blank" href="https://makerworld.com/it/models/59357" rel="nofollow noopener">Bambu Lab Modular Multi Filament Spool</a></h2><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-11-07_7c6cea4bd5ebd.png">------------------------------------------------------------------------------------------------------------------------------------------------------------------------<h2>Bambu Lab Multi Filament Spool</h2><h3>Introduction</h3>A multi-filament drop-in replacement for the bambulab spool. You'll be able to insert up to 4 different filament in a single spool. Useful if you have samples or leftover on many spools.<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_5cb94fd2d43a2.png"></figure>&nbsp;<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_00f2280014302.png"></figure>&nbsp;It is also available a <a target="_blank" href="https://makerworld.com/it/models/41799" rel="nofollow noopener">2 Filament Spool Version here</a><figure class="image image_resized" style="width:86.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-15_b908133f8c4d1.png"></figure><h2> </h2><h2>IMPORTANT: If you have a A1 Mini you must use <a target="_blank" href="https://makerworld.com/it/models/57054" rel="nofollow noopener">THIS ONE</a> instead.</h2><h2>What you'll need:</h2><h3>Filament Clip</h3>To stop the filament from unwinding you'll need <a target="_blank" href="https://makerworld.com/it/models/41154" rel="nofollow noopener">this filament clip</a>:<figure class="image image_resized" style="width:56.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_1622cbf74ed12.png"></figure><h3> </h3><h3>AMS PTFE Feeder Cap</h3>Optional but highly recommended to releaf the strain on the filament during spool movementsSuggested model:<ul><li><a target="_blank" href="https://www.printables.com/model/308399-bambu-ams-feeder-pfte-adapter-remix/files" rel="nofollow noopener">https://www.printables.com/model/308399-bambu-ams-feeder-pfte-adapter-remix/files</a></li></ul>The PFTE tube should be 80mm in lenght <figure class="image image_resized" style="width:56.34%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-15_9c7e78a5c1369.jpg"></figure>&nbsp;&nbsp;<h2>Assembly instructions</h2><ul><li>twist the bambulab spool to open it in half</li><li>align every spool disk as shown in the illustration, taking care to align the internal channels</li><li>insert the dovetail stoppers (the 2 trapezoid pieces) inside the channels</li><li>put together the bambulab spool and twist it back in position the 2 halves</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_821ae8bca303f.png"> <h3>Correct order:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_f5b9c59fdff91.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_1d9d3951ff83.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_840315b5910f3.jpg"></figure><h3>N.B. Align all the holes as shown in the figure below</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_3f452851cd833.png"></figure><h3> </h3><h2>Filament insertion</h2><ul><li>Straighten up the end of the filament </li><li>Fold at 90 degree angle the last 2-3 mm using a plier.</li><li>Put the curved filament in the hole </li><li>Start winding it mantaining tension on the spool for the first couple of turns</li></ul>&nbsp;

Bambulab Multi Filament Spool - 4 Filaments

Spool

Lilac Rage

<h3>Homer Backing Into the Bushes Meme Christmas Ornament</h3>Back in my day we would look at our memes in only 2 dimensions, which was the style at the time.&nbsp;----------------If you like my stuff, check out my patreon<a target="_blank" href="https://www.patreon.com/LilacRage" rel="nofollow noopener">https://www.patreon.com/LilacRage</a>-------<h3>Instructions:</h3>Print face down on the build plate.Colors used in the print:&nbsp;<ul><li>Bambu Basic Yellow</li><li>Bambu Basic White</li><li>IIIDMax Tan</li><li>Generic PLA Black (Random Amazon Brand)</li></ul>&nbsp;----- Be careful using other print profiles than the one provided. I had to slow down the first layer and tweak a few things in order to get the first layer to adhere well. The individual ‘pixels’ are quite small and unless your filament is dry and well tuned, you may have issues with the first layer. I also HIGHLY recommend using a textured PEI plate for the best surface finish and better adhesion.&nbsp;___________ <a target="_blank" href="https://makerworld.com/en/u/2064416831/collections" rel="nofollow noopener">Check Out The Rest of my Ornaments Here</a> ___________ Post Your Makes in the Comments! &nbsp;

Homer Meme Ornament

Friki

Bastien

WORK IN PROGRESS&nbsp;First, I want to thank 86duino the original author for his excellent work, we can find it on <a href="https://cults3d.com/en/3d-model/game/super-mario-complete-set" rel="nofollow">cults</a> and <a href="https://www.thingiverse.com/thing:1991111" rel="nofollow">thingiverse</a>.I really like the work done but the watermark completely “distorts” Mario...so I made the following changes:<ul><li>removed watermark on the right leg</li><li>removed watermark on both gloves</li><li>removed watermark behind the head (this one was hidden, I realized it after)</li></ul>&nbsp;<ul><li>added “marks” on gloves</li><li><img src="https://media.printables.com/media/prints/487664/rich_content/2918283e-84fb-4d94-8272-a13ee567dc90/capture-decran-2023-05-22-a-193747.jpg#%7B%22uuid%22%3A%2289ec36c1-5270-4cd7-8e3d-0c4ba56782cb%22%2C%22w%22%3A880%2C%22h%22%3A876%7D"></li><li>added theeth to the smile</li><li><img src="https://media.printables.com/media/prints/487664/rich_content/ae1009aa-d035-45cb-82fe-0486875c8621/capture-decran-2023-05-22-a-195422.jpg#%7B%22uuid%22%3A%225e733898-a9cf-48c2-8674-2a169464d138%22%2C%22w%22%3A652%2C%22h%22%3A632%7D"><img src="https://media.printables.com/media/prints/487664/rich_content/22b09f86-cf87-4aa5-bcc1-1f1f5c150682/capture-decran-2023-05-22-a-200526.jpg#%7B%22uuid%22%3A%223e190a02-e97f-42be-b6d8-44030a460341%22%2C%22w%22%3A1438%2C%22h%22%3A766%7D"></li><li>added fully printable eye</li><li><img src="https://media.printables.com/media/prints/487664/rich_content/83cfe222-39c7-493a-a598-2f522d0a33c0/capture-decran-2023-05-22-a-195707.jpg#%7B%22uuid%22%3A%22f505f3a3-1c26-47f4-8786-00a38395428a%22%2C%22w%22%3A652%2C%22h%22%3A632%7D"><img src="https://media.printables.com/media/prints/487664/rich_content/64ed3ab1-8fb6-43d4-8423-eed108283393/capture-decran-2023-05-22-a-200448.jpg#%7B%22uuid%22%3A%22378b6dac-0ef3-4fec-b57a-8a0c2baa0637%22%2C%22w%22%3A1350%2C%22h%22%3A884%7D"></li><li>added fully printable logo M</li><li><img src="https://media.printables.com/media/prints/487664/rich_content/dbc7bf7b-c6b3-4c00-8bbb-0b45b730c8a3/capture-decran-2023-05-22-a-195747.jpg#%7B%22uuid%22%3A%22d778452b-27d8-46ed-a02e-0deecc17a055%22%2C%22w%22%3A652%2C%22h%22%3A632%7D"><img src="https://media.printables.com/media/prints/487664/rich_content/2aa0e20b-b2ae-43ea-b513-e3e65254dab0/capture-decran-2023-05-22-a-200556.jpg#%7B%22uuid%22%3A%2203de00f9-7ca4-427f-8ff5-af70a5856f97%22%2C%22w%22%3A1534%2C%22h%22%3A766%7D"></li></ul>I have a multi-material printer and was able to print the mouth, eyes and M logo by painting from the Slicer, but I also printed a <a href="https://www.thingiverse.com/thing:2939398" rel="nofollow">Luigi where the author</a> had separated all the colored parts for everyone to print. As a result I created an assembly version of Mario by separating the M logo from the cap in 2 parts, the eyes in 3 parts and the mouth in 2 parts.&nbsp;There is 2 folders:<ul><li>Painting or MMU contains the closest files to the original, only the watermarks have been removed and the gloves have been modified</li><li>Multipart contains all the modifications but also the eyes, the mouth and the logo in several parts</li></ul>The tolerances can be different depending on the calibration of your printers, make a test by printing the 3 parts of the eyes.The model is 90cm high, happy printing

Mario reworked (no watermark)

Figuras

mcgybeer

Cali-Dragon!Is your printer able to produce quality prints? When printing organic models you don't really care about precision and tolerances, you want them to look pretty. This small print allows you to test:<ul><li>Surface smoothness (aka layer consistency)</li><li>Stringing</li><li>Small perimeters</li><li>Overhangs</li><li>Ghosting</li><li>Details</li><li>Multicolor</li></ul>If printed in multiple colors, I encourage you to print several at the same time. Build a Cali-Dragon army!

Cali-Dragon

Test

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

Starwars

Lofted Goods

A mid century modern vase.&nbsp;No supports needed. Easy print. Can be scaled up or down however you like.&nbsp;Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: <a target="_blank" href="https://hendricks.design/links/" rel="nofollow noopener">https://hendricks.design/links/ </a>

MCM Vase

Casa

Articulated Lizard, the original!No supports or assembly required. Just slice and print!!

Articulated Lizard v2

Articulated

BODY3D

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>

Ghost Booh

Halloween

Black Glovz

2 part Snowflakes. They snap into eachother. Can be combined&nbsp;More snowflake models in my Christmas collection:&nbsp;<a target="_blank" href="https://makerworld.com/en/u/1370809146/collections/59939" rel="nofollow noopener">https://makerworld.com/en/u/1370809146/collections/59939</a> &nbsp;