jwhitaker24

SabreDesign

Modern easter bunny decoration. The model is 110 mm tall, can be scaled up to your liking. The inside of the model is hollow to save on filament.&nbsp;If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-09_3031dfb02454e.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-04_f1cfd27f8e9d5.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-02_bdab38c1e474e.png">&nbsp;&nbsp;&nbsp;

Easter bunny

Easter

happyboard.company

A 2-part version of my swirled lamp shade.&nbsp;Its as easy to print as my other lamp shades and also does not need any support like the others. Orient both parts updisde down and hit print. Set the seam alignment to random for a better result.&nbsp;I added a testprint which only prints the interface part between top and bottom so you can check whether you'll need to calibrate your filament or not for a seamless result between base and top part.&nbsp;You'll also need the LED Hardware Kit 001 adapter and the Hardware Kit 001 itself. You can find a print profile of the adapter on this page, or you can download it from the official Bambu Labs account. I altered the bajonette adapter for a quite tight fit. You will need some force to get it into place, but it will fit tight and snug.&nbsp;I used Bambu Lab PLA Matte White for this lamp shade. PLA Marble will also look very nice on it. Get creative with translucent or gradient filaments to achieve other nice effects.&nbsp;0.2mm layer height2 walls22% gyroid infill

Swirled Lamp Shade ~48cm height for LED Kit 001

LED lamps

Bambu Lab

This halloween Jack-o-lantern project offers two types of 3D-printed lamps. The top and bottom parts of the lantern are connected to the cap and lamp base via a quick-release structure. When the lamp base is installed on the top, it can serve as a handle. Each of the three caps features a different cutout pattern: skull, spider, and bat. Light can shine through the cap to project the patterns onto the table.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000039480/design/2023-10-13_a47450404ffd6.gif"></figure>&nbsp;Recommended filaments: Bambu PLA Basic Orange(10300)<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40909351485555" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40909351485555</a>If you have other Halloween models to print, you can also purchase Halloween Pack filament<a target="_blank" href="https://store.bambulab.com/products/halloween-pack" rel="nofollow noopener">https://store.bambulab.com/products/halloween-pack</a>&nbsp;Compatible Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.

Halloween Jack-O’-Lantern

Halloween

Xeraj

Test model PLA temp tower..3mf file contains encoded temperature changesIt is necessary to download the .3mf file in Raw models&nbsp;<h3>Update:</h3>Instruction:<ol><li>Click on the “Download or Print” button</li><li>Then pick “Download STL”</li><li>Download “PLA_calibration_set_temp.3mf” file</li><li>Print.</li></ol>

Calibration Tower PLA

Calibration

QwermMakes

This tool will allow you to quickly make correctly sized springs for AR-15 magazines and is adjustable to allow for various types of wire. This project is heavily inspired by HW Enterprises’s SpringFactory.Included is a PDF guide, STLs and STEPs.

AR15 Magazine Spring Machine

Firearms

evax design

Ide o dekoráciu určenú na zdobenie. Je to niečo, čo si môže užiť každý! Je to veľmi jednoduché. Výška dekorácie je 19 cm šírka 22cm. Pred vytlačením, si pozrite pokyny pre tlač.Pokyny pre tlačOrientácia decoracie pri tlači by mala byť uložená na podložku plochou stranou. Je navrhnutý na tlač bez podpôr. Dekorácia je tlačená výškou vrstvy 0,2 a 0,4 tryskou a s 100% priamočiarou výplňou a 2 perimetre. Na obrázku som použila biely filament. Model je možné proporčne zmenšiť alebo zväčšiť ale je potrebné pridať alebo odobrať vyšku vrstiev!Ak máte nejaké problémy alebo návrhy, tak mi zanechajte komentár a dajte mi vedieť. Ak sa vám moje modely páčia, nezabudnite ma podporiť pri ďalších výtvoroch!

Vianočná dekorácia Santa a dievčatko

Christmas

Jorge Rui

<h3>Introduction</h3><blockquote>3mf files are for use only on bambu studio and Orca Slicer - Latest version. Step files are available for the most excellent Prusa Slicer and others.</blockquote>&nbsp;This is my idea of a keychain. The tags are large, and the colors are bright, so maybe it's not so easy to miss. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_xyhck86v113n.jpg"></figure>This keychain is an elegant, highly customizable, and practical solution. Who has ever used a traditional keychain closet, knows that it is not always easy to put the keys there.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_gh7m00henasp.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_et9ho9yhlkf7.jpg"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_kktrixy3yq5q.jpg"></figure>It can be used with the tags, but also with simply the key (as long as they have some iron on it). It works with the magic and invisible magnetic force, if the keys are from brass to aluminum, the solution is to use one of the available tags. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_73tz8bljc3ut.jpg"></figure><h4>Smart</h4>For those who are in the home rental business, or have a home with home automation, I also added the possibility to add an <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC</a> Tag to each of the keychain docks. This way, you can give directions to your guest or automate something every time you bring your <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC Tag </a>reader close to the dock. If you don't find this interesting, just don't use the NFC Tag ;)ChallengeI leave here a challenge to those who are more comfortable with electronics, namely using and programming the <a target="_blank" href="https://en.wikipedia.org/wiki/ESP32" rel="nofollow noopener">ESP32</a>. If anyone is interested in collaborating in order to put a microcontroller in the dock, please contact me. The idea that by putting the key on the keychain and start an action is interesting. (this, of course, without using the mobile phone). NFC Tag was the simplest way I found to enable this kind of interaction, but you always need a mobile phone nearby… Well, it's not bad, but an ESP32 will be better, but then we have the battery problem… ;)<h4>How it works</h4><ol><li>Simply hold the tag or key close to the dock and the magical magnetic force will do the rest. </li><li>If you are already in the future, whenever you think it is necessary, you can bring your phone close to the dock and trigger a set of actions. I know that with iOS this is very easy through the automations in the Shortcuts app, and I'm sure that on Android it won't be difficult either. Regardless of the system and in a universal solution, <a target="_blank" href="https://www.home-assistant.io/" rel="nofollow noopener">Homeassistant </a>works great with ID tags.</li></ol>But enough about automation, that was something I decided to add and that wasn't the reason I made this keychain. <h4>Available variations</h4><ul><li>Colors for ID the dock and the tags, choose any colors you like.</li><li>3D printable labels on the dock (Garage, House, Office and Mailbox). Some more could be available for members. This you have to download here, they can be remixed, that way you can add your text.</li><li>Version to add labels as stickers.</li><li>A dock version to hang.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_7j5oec22wkpa.jpg"></figure><h3>Print instructions</h3>This project is designed to make printing easy, but there are a few things you should take into consideration.The tag has a neodymium magnet embedded in it. Therefore, it will be necessary to program a pause in the last layer where the pocket where the magnet is inserted is closed.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_1p5q6bf8f69w.jpg"></figure>These files can be remixed, so the copyrights of does is different from this one, the only way I know to make this is by creating a new project.You can download here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/38287" rel="nofollow noopener">Tags and Labels for the Keychain</a></li></ul><h3> </h3><h3>Assembly instructions</h3><ol><li>Print the parts.</li><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">Get some neodymium magnets </a>and, if you want, some <a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">NFC Stickers</a>.</li><li>Assemble the dock (this example is good for all version.<ol><li>Force the magnet on its socket (can help push it against a piece of wood, don't use metal, the magnet will break).</li></ol></li><li>The name label on the top will press fit.</li><li>For better adhesion of the parts, you can use double-sided adhesive tape. <ol><li>Something like <a target="_blank" href="https://amzn.to/3rTK3Cp" rel="nofollow noopener">this</a></li></ol></li><li>If needed, you can glue it all.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_r26u97h2ahzx.jpg"></figure> 6. If you go for the rail fixing, please choose one of the configurations available on the 3mf file. Remember that you can use the cut function on the slicer. <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=nyevb4B_NB8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/nyevb4B_NB8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Material</h3><ul><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">2x neodymium magnets of 10x3mm</a> (one for the dock, other for the Tag)</li><li><a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">1x NFC sticker Tags</a> (if you plan to use them)</li><li>For the rail fixation, you will need bolts of about 4mm in diameter. </li><li>For a small help, use this affiliate link to buy filament, it will cost you the same. Thanks ! <ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filaments used on this project</a></li></ul></li></ul><h4> </h4><h4>Development</h4>I think it might be interesting to show what's behind a finished product, so from this project onwards I can include some information regarding product development. Give some feedback if you find it interesting or if you find this irrelevant.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_nk7t1q5kb3pq.jpeg"></figure><h3>Change log:</h3><ul><li>(12-10-2023) - Added blank labels; download file: “Name_blank.step” and “Tag_blank.step”.</li></ul><figure class="table" style="width:97.1%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:81.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_8cc3cc988b56e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_d7a7c61134e7e.jpg"></figure></td></tr></tbody></table></figure><h4>Support the designer:</h4><ul><li>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.</li></ul><a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">And check my other projects, maybe you find there something usefull</a>

Keychain and Tags

Misc

blecheimer

Well ... uhm ... I just had published my latest model: <a target="_blank" href="https://makerworld.com/de/models/36181#profileId-34043" rel="nofollow noopener">https://makerworld.com/de/models/36181#profileId-34043</a> Unfortunally directly afterwards I got another idea: What if I double the bit driver? I just had to do it: The Mini Double Bit Driver for carrying two of your beloved bits!&nbsp;Print the caps in PLA with a layer height of 0.2mm, 3 walls, 5 tops, 4 bottoms and 15% infill. Support is not necessary. I recommend using a brim, that will improve the bed adhesion. The driver itself needs support as shown in the picture or in the 3mf file. The rest of the settings are the same as for the caps. The optional gaskets should be printed in TPU. Use a smaller layer height (e.g. 0.12mm), no brim, 2 walls, 3 tops & bottoms, no infill and no support.&nbsp;For assembly just add two standard bits. I testet serveral bits and they all had a tight fit. If necessary you can add two Ø5x2mm magnets - there are a holes for them inside the driver.Screw the caps on the driver. The threads are similar to M12 but extra tight so they do not come open in your pocket. &nbsp;The gaskets are optional and can help to prevent unintentional opening of the threads. If needed just press the gaskets over the threads to the little grooves at the bottom end of the threads.&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by-nc-sa/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY-NC-SA 4.0</a> You are not allowed to copy this model to other 3D printing websites without my permission.

Mini Double Bit Driver Keychain

Tools

effixe

This is a remix of a fuse holder (<a href="https://www.thingiverse.com/thing:2484738" rel="nofollow">https://www.thingiverse.com/thing:2484738</a>) now, it can be mounted on a wall by two screws.<h3> Print Settings</h3>Printer Brand:PrusaPrinter: <div>Prusa Clone</div>Rafts:NoSupports: <div>No</div>Category: Hobby

Fuse Holder Remix

Automotive

<blockquote>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;For a small help use this affiliate link to buy fillament, it will cost you the same. Thanks !<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Filaments used on this project</a><a target="_blank" href="https://shrsl.com/4cpox" rel="nofollow noopener">Complete hotend for the X series</a><a target="_blank" href="https://shrsl.com/4cpoy" rel="nofollow noopener">Hotend with nozzle X series</a><a target="_blank" href="https://shrsl.com/4cpov" rel="nofollow noopener">Other Accessories</a>&nbsp;</blockquote><h2>A note about this model</h2>There is a nes and updated version of this, with a modular approach, based on my <a target="_blank" href="https://makerworld.com/en/models/13415?profileId=13268" rel="nofollow noopener">MMSS</a>, and is available <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">here</a>.&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_37429ce72890f.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b69a4d08ab4d8.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_8fb4405968195.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_de4c9a7b9700e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_97413a6c36b6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012950/design/2023-09-07_b12c00384f143.jpg"></figure></td></tr></tbody></table></figure>Nevertheless, this one was my first take on this, and I think it’s nice for you to have something to store your tools and accessories ;)&nbsp;This is a debugged version of the initial release. It presents all the updates and some improvements that have been implemented in the meantime. This version will be updated over time.The entire production sequence was updated in order to translate the comments that were made over time by members. However, you are free to define your own printing strategy. The colored areas are already found as separate objects, therefore it is not necessary to use the painting tool, an exception for the areas where the accessories come reside; in this situation, I chose not to create different bodies, as it is my opinion it would take too long to print, increasing the potential for errors. In this last situation, and if you want, you can simply use the “area painting tool”.<h2>Instructions</h2>ClipsSome examples regarding fits and snapfits. <a target="_blank" href="https://youtu.be/TNyjlRgM0HY" rel="nofollow noopener">(youtube link)</a>&nbsp;Extra material:<ul><li>For the hinges, you will need 2x M4x30 CHC ISO 4762, or a FHC of the same size. If you don&#39;t have that you can print.</li><li>You may want the scrape… you can find it <a target="_blank" href="https://www.printables.com/model/531116-small-scraper-tool" rel="nofollow noopener">here, it is a model that I&#39;ve Remixed</a></li><li>spacer_ silicon_sock.STEP - needed if you have a narrow silicon sock on the hotend (most people will need this)</li></ul><h3>Change Log:</h3><ul><li>(31-08-2023) Revised Latch - More functional<ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li><li>(29-04-2024) Revised Latch - More functional <ul><li>Optimizations and various dimensional compensations.</li><li>New 3mf file, which I hope will make the printing process simpler and with a higher success rate.</li></ul></li></ul>&nbsp;

RV