Search models, users, collections, and posts
Bio
I make custom lighting fixtures, usually with addressable LEDs or lasers. Many are subtly music-reactive or use sensors and motors to add motion.
Achievements
Pioneer Maker
Print successful 130 different models and 7,256 hours
MakerWorld Guardian
This badge has expired
I designed a Wago 221-61X (and 41X) series of mounts with strain relief and a configured Fusion source available.
Wago mounts - 221-41X & 61X with Fusion configured
36
149
Share
0
0
0
Great set! Only feedback would be to consider a version with text on both sides and a little more positive lock when the tray is fully inserted to prevent it from sliding out accidentally; Since some others haven't had this problem I'll just add that I printed the enclosure in PETG HF straight from the dryer using the 0.12 "High Quality" preset.
For others: consider labeling with debossed text or an UP icon if you're not going to memorize the orientation.
Share
0
0
0
Bambu PLA-CF; like others said, hole too tight. used @MasterPain’s suggested 8.15mm Ø x 47mm long negative cylinder and still needed sanding, silicone lube, and a mallet. For others: the nature of the design is such that it’s fairly tolerant of an undersized pin; I suggest someone try with a 8.3mm negative cylinder to further enlarge the roller holes. A slotted or tapered pin could be a good improvement.
Share
0
0
0
Have you ever noticed the original BLV AMS riser's Accessory drawer had problems with the hex key holder? I wanted to fix that and a few other things. Fusion model included, so your next mod will be a lot easier (add handles, change to hexagons, whatever).
BLV AMS Improved Accessory Drawer
51
213
Share
0
0
0
No more data