killjoy

cyanidesugar

Yes, I know, my painting skills are severely lacking LOL!&nbsp;This Eevee model has been one of the most requested cards, and I finally had the time to get around to it! Much like the other oversized cards, this is a HueForge Hybrid, combining a 3D model and a HueForge filament painting into a single model.&nbsp;No supports are needed for this print and no gluing is required. However, you will need to paint the Eevee once the the print is finished. If you want to resize this print, please ONLY resize the X and Y dimensions and NOT the Z dimension.&nbsp;If you are using Bambu Studio, the included 3MF file will have the colour swaps and height range modifiers already loaded within the file. All you need to do is make sure your AMS is loaded with the correct colours. You DO NOT need an AMS for this print, and if you do not use one, just use a pause instead of a filament swap so that you can manually swap your colours.&nbsp;If you ARE NOT using Bambu Studio, you can download the STL file and follow the instructions below:&nbsp;Print Instructions:<ul><li>For layers 0.00mm to 2.28mm print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm. This is the &#39;Card&#39; portion of the print.</li><li>For layers 2.28mm to 4.28mm print at 0.16mm, 4 walls, 3 tops, 3 bottoms and 8% Gyroid infill. This is the Eevee portion of this print.</li><li>In order to use these different settings on different layers, you can use a &#39;height range modifier&#39; in the slicer to set them.</li></ul>You will notice in the 3MF file that I have also added a height range modifier for 0.00 - 0.6mm printing at layer height 0.2mm. This is completely optional, I just do it to make the print speed up since its just priting base layers with no blending requirements. You do not have to do this if you do not want to.&nbsp;Filaments Used:<ul><li>PLA BambuLab Basic Red Transmission Distance: 5</li><li>PLA Kingroon Black Transmission Distance: 0.1</li><li>PLA Chrominal Penumbra Gray Transmission Distance: 6.9</li><li>PLA BambuLab Basic Jade White Transmission Distance: 5.8</li><li>PLA CC3D Lemon Yellow Transmission Distance: 6.8</li><li>PLA Sunlu Coffee Transmission Distance: 1.8</li></ul>This print uses 6 unique filaments&nbsp;Swap Instructions:<ul><li>Start with Red</li><li>At 0.68mm swap to Black</li><li>At 1mm swap to Penumbra Gray</li><li>At 1.16mm swap to Jade White</li><li>At 1.8mm swap to Lemon Yellow</li><li>At 2.44mm swap to Coffee for the rest.</li></ul>This print uses <a target="_blank" href="https://www.thingiverse.com/thing:6212049" rel="nofollow noopener">this Eevee model </a>by <a target="_blank" href="https://www.thingiverse.com/irnkman/designs" rel="nofollow noopener">Irkman </a>. They have a bunch of Eevee&#39;s evolutions available as well so definitely check them out!&nbsp;_______________________________________If you&#39;d like to support me, I now have a <a target="_blank" href="https://patreon.com/cyanidesugar3dp" rel="nofollow noopener">Patreon</a>! Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more! If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!_______________________________________

Oversized Eevee Pokemon Card - HueForge Hybrid

card organizer stuff

3djacobb

The Batman 2022 Full Part 4

full suit

Geek Genius Collective

49ers Lightbox done in four colors instead of 4 for people with only one AMS or A1s.If you want to print the 5 color version see my other models to find it. Original example printed Bambu basic PLA black, white, gold (not silk) and red.As always be sure to heat up your hotend to clean any old filament that is stuck to the nozzle before sending the print. This will help keep color wisps to a minimum.The back has a negative cube included in the objects that you can move and scale as you need for your LED installation.Enjoy and Happy Printing!

49ers Lightbox 4 Color 

sports stuff

Lytographum lab

I designed this organizer to be modular and to use as little material as possible.There are two versions: the first version is lightened as much as possible with a hexagonal pattern, while the second has a flat bottom for greater flexibility.In the photos you can see an example of use for external hard drives. If desired, there are also .step files to customize the object as much as possible

Desk modular organizer

desk stuff

Speedy 3d

This amazing miniature set is very expandible and scalable. It is a perfect and unique gift for both young and old to play or display with it. It offers small TPU cinder blocks with wooden pallets. The blocks can be printed in TPU and I personally printed the wood pallets with wood infused PLA.

Mini Cinder Block and Palette Set

models 

This is an excellent way to organize parts, screws, and tools. It can be printed thicker as it is used for craft and takedowns. You may insert the new tray design for contrast of color and a replaceable work surface. Print this surface so the PEI steel texture shows!

V1 Tool & Tech Organizer Work Mat  (TPU Insert)

tools & stuff

thelightspd

One of the biggest issues witht the Bambu AMS Lite is the footprint it takes. I wanted to have it on the wall when I wanted it on the wall and to be able to quickly take it to the desk when needed. I wanted to do this without any screws or hardware and thats exactly what we got here. &nbsp;Print the Wall Cleat (french cleat); Attach to the wall with 3" sheet rock screws into a stud. There are two. Once this is done no other tools are needed. Replace the stand on the AMS with the AMS attachment and use all 8 screws. Once attached you no longer need tools. You simply slide it over the wall cleat… and make sure it snaps tightly into place. Light tapping on the ams may be needed to get it to seat. This is by design. If you want to print the desk stand in one piece, you need something like a Voron 300mm or bigger to print it in one go. If you don't have a printer that big I made a version for a Bambu size printer. For that version you print the feet as one, the spine, and the bolt. Yes you need to use supports like tree supports. Once printed assembly and tighten by using the bolt. If you can glue it up. It's better in the long run. &nbsp;I made the desk stand so it can be easily used or not with a push and a click. Enjoy.

The Ultimate Modular AMS Lite Mounting System

ams lite upgrades

3D design shop

I created my own Poop Baffle.only 1,77 gram&nbsp;Everything has been thoroughly tested and works flawlessly.&nbsp;I printed it with a 0.4 nozzle and 0.20 mm layer height.Enjoy!