jtmch

Clipp3D

Christmas House Build Kit UPDATE 09.12.2023 The first version had an issue with the part Wall_A, where the tabs on the wall were bigger than the slots on parts GroundFloor_Pillar_A, GroundFloor_Pillar_C, GroundFloor_Pillar_D and GroundFloor_Pillar_E. The files are now fixed and contain a different version of Wall_A with shorter tabs. If you happen to already have printed the walls, you can use the second print profile, just containing modified versions of the pillars, so you don't have to print all 3 Wall_A parts again. ---------------------- The model has been printed and tested on a Bambu Lab X1C. All of the parts are optimized for printing without AMS and easy assembly. Most parts fit by just sliding into each other, just a few ones may require some glue. The tolerances between parts are 0,016mm and everything worked perfectly when testing with Bambu Lab PLA and PolyTerra PLA. Depending on the accuracy of your machine and your choice of filament, there might be a little bit of work necessary to make everything fit. The file contains all the parts colored white. Take your time while choosing your colors and make it your very own model. This my first kit-model, so I‘d really appreciate some feedback on the design and assembly process. Happy printing!

Christmas House | Build Kit

Xmas 

Whopper Printing

This fun model is print-in-place and prints entirely without support and folds together right off the build plate. No assembly!&nbsp;This model is designed to fit small LED tealights inside (but you can change the source of light to anything you want)! Optionally, I've designed an insert that when lit from the back, takes the design to another level!&nbsp;The wheels are locked to the body of the model during printing in order to ensure nothing comes off the print bed during printing, but can be broken free and rotated after printing.&nbsp;If you would like to support me, consider these options:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Haunted Hearse - Print-in-Place Foldable Model

spooktober

NUKDDD

<a target="_blank" href="https://makerworld.com/en/models/241060#profileId-257062" rel="nofollow noopener">Base adapter for Ikea Kapplake</a> by <a target="_blank" href="https://makerworld.com/en/u/2603186158" rel="nofollow noopener">RyuDragon</a> &nbsp;This one is for myself and all the Zelda fans, I designed this to be printed without any supports and everything threads together buttery smooth. This resembles the electric battery that can be found in the shrines throughout the game.&nbsp;If you like this please give a 👍🏼 even if you don't download this, it'll help others discover it. Follow for more to come!&nbsp;Assembly is easy, follow my disassemble gif in reverse, it's more fun that way 😏<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711153/2024-01-28_7bde9bbeb2f73.gif"></figure>&nbsp;Designed to perfectly fit the official Bambu LED Lamp Kit 001, although, you can also find similar light of the same size puck on places like Amazon.&nbsp;<a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Click here for Lamp Kit from Bambu</a> Don't forget to print the diffuser discs, otherwise it'll be too bright! 🕶️ There are 3 different thickness diffuser discs for different lighting effect, print them in your favorite colors! It could be anything, no need to buy an rgb light puck, but of course you can if you want, you do you.&nbsp;Every piece threads together smoothly. Only 1 part need to be multicolor, and only 4 color changes!&nbsp;Print profiles are separated by color and material, I used marble PLA for the top and bottom bodies, clear PLA for the shade, and bronze silk PLA for the LED kit holder and the very top piece with the marble for the AMS.&nbsp;<a target="_blank" href="https://shrsl.com/4gfw5" rel="nofollow noopener">PLA Marble</a><a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">PLA Basic</a><a target="_blank" href="https://shrsl.com/4gfwi" rel="nofollow noopener">PLA Silk</a>&nbsp;A note on the printing the shade, I've disabled infill for the main part with the patterns only and only has 1 0.8mm wall, the threads on tope and bottom have 3 walls and are pretty much solid, this is to reduce the “white specks” that can be seem because it's a translucent material. Don't worry, it's not delicate.&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

ToTK Zonai Shrine Electric Battery

lamp

Axel Dreher

…May the 4 be with You! Hello fans and friends of the Lightsaber, After much research, I have now provided my construction of the Obi-Wan Kenobi Lightsaber from &#34;A New Hope&#34;. I hope I can make one or two people happy with this!&nbsp;...if you want you can increase the weight of the lightsaber with an 8mm threaded rod (24cm long) and a few 8mm nuts!&nbsp;...and if you like it, I would be happy about a like! Believe me, there is a lot of work involved.

Obi-Wan Kenobi Lightsaber from Episode 4

Saber

geode.rc

<h2>Summary</h2>3D Printed &#34;Carbon Bug&#34; DLG with Carbon Nylon PA-CF filament. All DLG parts are printed with PA-CF for best strength/weight ratio and high temperature resistance. This release also comes with newly designed skeleton tail feathers, integrated fuselage/wing root and re-fined wing jig, etc.&nbsp;Revision History:Rev 1.0 (4/27/2024) Original releaseCarbon Bug is intended for experienced builders/pilots with extensive knowledge in building DLG gliders. Although not required, builder is recommended to have experience with Bambu Studio slicer and modifier.&nbsp;RCGroups Thread: <a target="_blank" href="https://www.rcgroups.com/forums/showthread.php?4489525-Another-Bug-DLG-3D-Printed-Version" rel="nofollow noopener">https://www.rcgroups.com/forums/showthread.php?4489525-Another-Bug-DLG-3D-Printed-Version</a>&nbsp;Lightnin’ Bug Plan: <a target="_blank" href="https://www.rcgroups.com/forums/showpost.php?p=30832050" rel="nofollow noopener">https://www.rcgroups.com/forums/showpost.php?p=30832050</a>Related Videos:(1) BUG 3DP Overview: <a target="_blank" href="https://youtu.be/MfsZifHM2jI" rel="nofollow noopener">https://youtu.be/MfsZifHM2jI</a> (2) BUG 3DP Build Log: <a target="_blank" href="https://youtu.be/UxRinoQI4BE" rel="nofollow noopener">https://youtu.be/UxRinoQI4BE</a> (3) BUG 3DP Flight Report: <a target="_blank" href="https://youtu.be/waddDkHVwfY" rel="nofollow noopener">https://youtu.be/waddDkHVwfY</a> (4) &#34;CARBON BUG&#34; Build Log / Manual: <a target="_blank" href="https://youtu.be/HaM_Sx3enYA" rel="nofollow noopener">https://youtu.be/HaM_Sx3enYA</a><h2>Print Settings</h2>Printer Brand: Bambulabs Printer: Bambu X1C&nbsp; Notes: This release is for Bambu Studio / Orca slicers. Please see build log / manual video and 3mf files for details.&nbsp;

"CARBON BUG" - ALL CARBON, 3D PRINTED DLG

JamesThePrinter

Take chess with you wherever you go with this MakerWorld exclusive!<figure class="image image_resized" style="width:31.46%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443923/design/2024-04-26_e80da61064c23.gif"></figure>This travel chess set includes all of your chess pieces, a board and storage area. Because the chess pieces are small and detailed, a small nozzle is required for the chess pieces!As a bonus, I have also included checkers in this set.<figure class="image image_resized" style="width:31.1%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443923/design/2024-04-26_dfa599f3ea1ca.jpg"></figure><h3>Print Settings</h3><ul><li>Chess Pieces<ul><li>0.2mm nozzle required</li><li>designed to use 0.1mm layer height</li></ul></li><li>Checkers<ul><li>0.2mm nozzle recommended, but not required</li></ul></li><li>Board &amp; Case<ul><li>Nozzle size doesn&#39;t matter - I included print profiles for 0.2mm and 0.4mm nozzle sizes<ul><li>0.2mm nozzle - Allows you to keep the same nozzle installed, but the prints take longer</li><li>0.4mm nozzle - Forces a nozzle change, but drastically lowers print time</li></ul></li></ul></li></ul>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Dark Brown PLA</li><li>Bambu Lab Matte Brown Latte PLA</li><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Basic Ivory White PLA</li><li>Bambu Lab Matte Scarlet Red PLA</li></ul>

Travel Chess Set

Travel Games

Chess

WF3Dprinting

The model is split in to several pieces to fit on to a printer with a build volume of 25 x 21 x 21 cm or 9,84 x 8,3 x 8,3 in. (Example Prusa MK3) All parts are rotated for optimal printing with minimal supports. Besides the printed parts you only need some filament strips and 6 mm black electric wire (for the side wire detail). You can see more details in my build video: https://www.youtube.com/watch?v=jT_OLkHsA_wThe model is split so you can print all parts in the right color and then assemble it. Edit 24.04.2022: Use 3-4 perimeters for the black rods and go really low infill and max 2 perimeters for all the parts above the head, otherwise it will be too heavy. If your parts end up to heavy check out this remix by JPMakesStuff: https://www.printables.com/model/177328-star-wars-d-o-droid-head-support-block

Star Wars D-O Droid

DROID

KYZ Design

<h3>Bees may have bestagons but humans still build rectangular walls. So here are the rectangular frame pieces!</h3>There are framed pieces for a few different sizes:<ul><li>The 12x9 System - recommended for X1 and P1 series printers - the middle pieces are 12 cells wide by 9 cells high. This makes the biggest pieces per print on a 256x256 bed with a filament cutter exclusion area (i.e. on a P1P/P1S/X1C without physically blocking out the filament cutter). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model (it's one of the first things I modelled and shared after getting my P1P!).</li></ul>&nbsp;<ul><li>The 12x10 System - recommended for the A1 - the middle pieces are 12 cells wide by 10 cells high. This makes the biggest pieces per print on a 256x256 bed without an exclusion area (i.e. on an A1 or a <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">tweaked</a> P1P/P1S/X1C). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model.</li></ul>&nbsp;<ul><li>The 8x7 system - recommended for the A1 Mini - the middle pieces are 8 cells wide by 7 cells high. These are designed to maximise the 180x180 bed of the Prusa Mini, and consequently will also maximise the bed of the A1 mini. The middle piece for this system can also be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x10 system - the middle pieces are 10 cells wide by 10 cells high. These also fit on a 256x256 bed. This makes panels that have a more rectangular aspect ratio and less cells but you may have already started printing these. These may also better fit your wall space that you are trying to fill up due to the slightly different dimensions. The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x8 system - the middle pieces are 10 cells wide by 8 cells high. These max out a 220x220 bed (Ender 3 and Similar). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;&nbsp;For those of you that want other sizes for other printer beds, remix is allowed! Or leave a request in a comment if you can wait :)&nbsp;If you need HSW help in general, check out the honeycombwall subreddit.&nbsp;<h3>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/594876/2023-12-10_fde779d8f407b.jpg"></figure>

Framed HSW - Various Sizes - Honeycomb Storage Wall

Ambossa3D

I love the Box from Pred, so I remixed it to two smaler Sizes.4x4 and 4x3The Label-Short-Modell fits to both sizes.&nbsp;Happy printing :)

Smaler Gridfinity Storage Box

Gridfinity

aj3dprops

Well this is an easy print, only the teath really need supports if you are printing the top and bottom pieces

Lock mask

MASK

Krookr

<h2>Description</h2>This Silica Box is for the <a target="_blank" href="https://www.printables.com/model/392134-hydra-ams-enhanced-bambu-lab-ams" rel="nofollow noopener">AMS Hydra Mod</a>, but it also works perfectly with the standard AMS.&nbsp;It fits perfectly and the volume is larger than in other versions. There is also a version that support a Hygrometer. This is the Hygrometer I used <a target="_blank" href="https://www.amazon.de/dp/B0BKZXFDVX?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0BKZXFDVX</a>&nbsp;Each box holds around 100g of silica.&nbsp;<h3>Printing</h3>The version without Hydrometer prints without any supports. The Hygrometer version needs some supports at the top of the round cutout. I used tree support that starts from the print plate.The print profile I added is for the version without hygrometer.&nbsp;Disclaimer: This is a remixed model designed by Thomas: https://www.printables.com/model/423765-silica-dry-box-for-bambu-lab-ams-hydra-and-stock-v

Silica Dry Box for Bambu Lab AMS Hydra and Stock Version

BambuLab

Jorge Rui

<h2>Introduction</h2>Disclaimer: This model is part of the Creator Program, when you purchase the Wireless MouseComponents Kit-002 through the links below, creators may earn an affiliate commission as a reward of theirwork.Hardware Kit: <a target="_blank" href="https://shrsl.com/4cpnt" rel="nofollow noopener">Wireless Mouse Components Kit 002</a>Recommended filaments: <a target="_blank" href="https://shrsl.com/4cvrb" rel="nofollow noopener">Matte PLA</a> or if you prefer <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Basic PLA</a>, that said, you can use <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">any filament</a> you like as long is not TPU ;)&nbsp;<h2>Characteristics</h2><ul><li>With anthropometric dimensions between medium and large, it should be good for anyone with hands within this percentile;</li><li>It is oriented towards right-handed people;</li><li>In addition, to the usual rest area for the thumb, I also provided a rest area for the little finger, something that unfortunately the mouse I usually use does not have (MX Master 3);</li><li>4 button: Left, right and middle (on the scroll wheel) and a top middle button.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2023-10-21_706551f6f8569.jpg"></figure>&nbsp;You can find a monocolor and a multicolor version on the print profile. I advise you to test print the monocolor and see if it is ok for you, it is a fast print more or less 2 hours in total.&nbsp;<h2>Note</h2><ol><li>The mouse needs to be functional and tolerances are not the same has an injection mold part, so some zones have to be adjusted to better fit the 3D print process, on of does zones is the gap between the buttons and the rest of the shell.</li><li>The mouse needs to be 3D printed with the least amount of supports, and none or almost none supporting the external shell, this to limits the design</li><li>Last, this fits on bambu lab kit (version 002), I&#39;ve opted not to change their internal chassis, this way you can change tops easily :)</li></ol><h2>Change Log</h2><ul><li>08-11-2023 - Added a version without logo to the 3MF profile file.</li></ul><figure class="image image_resized" style="width: 39.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2023-11-08_532c0ee336a62.jpg"></figure><ul><li>26-05-2024 - A new mouse was released, the “Ergo Mouse”. You can find it here: <a target="_blank" href="https://makerworld.com/en/models/469851?designId=469851#profileId-385684" rel="nofollow noopener">Ergo Mouse I1</a></li></ul><figure class="image image_resized" style="width: 38.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2024-05-26_19eade05c2864.png"></figure>&nbsp;

"Manta" mouse - Bambu Lab Mouse Kit Compatible

BambuMouse

Josh-3D

A Gridfinity version of my sci-fi case. I wanted to explore Gridfinity a little bit for my tool organization needs, and decided to start with a gridfinity version of the case I made. I&#39;m digging it so far! This case has a grid of 4x5.&nbsp;Like my Scifi case, it uses 16 m3x10 screws and 4 4x6mm cyclinder magnets. A piece of filament is used for the hinge. Assembly should be pretty straight forward. Insert the filament into the hinge to attach the two halves together. Screw the ends on.&nbsp;The model has a difficult to print curved surface/edge, and works best when using a support material. I&#39;m using Bambu&#39;s PLA Support material. There is a profile provided though that doesn&#39;t use any special support material, but still has supports turned on to help the edge print better.&nbsp;Here&#39;s a link where you can purchase the magnets on the <a target="_blank" href="https://www.amazon.com/gp/product/B075PMYRFT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1" rel="nofollow noopener">US Amazon store.</a> If the Amazon store is out of stock, here&#39;s a few Alternatives <a target="_blank" href="https://suprememagnets.com/products/neodymium-magnet-4x6mm-disc" rel="nofollow noopener">HERE </a>and <a target="_blank" href="https://dev.apexmagnets.com/magnets/4mm-x-6mm-cylinders-neodymium-magnet" rel="nofollow noopener">HERE</a>. Sorry for the stock troubles! I use this size of magnet regularly, and I think we&#39;ve been causing stock to run out on a few sites.&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;&nbsp;

SciFi Container - Gridfinity Edition

Tool

Mimi home decoration

edit : add a box with magnets, and improve closure of the box &nbsp;you will need4 4x1 magnetsPrint in place box , print in 0,250 % speed for the 1st layer help to stick on the bed .can be print on A1 miniafter print, use an hair dryer a few second ( very few ) on the closed box to help the hinge having the good shape , and let become cold .<img src="https://makerworld.bblmw.com/makerworld/draft/236125/2023-11-27_f08053e6fd35e.jpg">&nbsp;see my others design to get bigger size of it , cards labels for this box and more<a target="_blank" href="https://makerworld.com/fr/u/2044748376" rel="nofollow noopener">https://makerworld.com/fr/u/2044748376</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/236125/2023-12-02_b1c7e6b73513e.jpg">&nbsp;<a target="_blank" href="https://makerworld.com/fr/u/2044748376" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/236125/2023-11-27_f0743615f1b55.jpg"></a>&nbsp;&nbsp;&nbsp;&nbsp;