jsalisbury93

snjames316

<h3>Description</h3>IntroI was tired of looking for a generic modular setup for Socket trays that you could swap sizes and completely customize on the fly when adding a new socket (or losing one). So I made a simple model and expanded it to fit any possible size(outside of oversized) and am self dubbing it the Gridfinity Universal Socket Trays (G.U.S.T). This setup was not build to maximize space, but instead to maximize visibility and simplicity by being able to reorganize at any point in time without the need to reprint everything. Enjoy rate and let me know if there are any issues not noted below. If you find you need a specific size I don&#39;t have in here, let me know. Lastly let me know if there are any improvements you would like to see made. &nbsp;Links to the full G.U.S.T. setsI don&#39;t usually like it when people put all their “check out my models here” but by (an unexpected) amount of demand, here are the links to ONLY the models related to the G.U.S.T. sets to help users navigate to the other sets directly online or in the app,&nbsp;<a target="_blank" href="https://makerworld.com/en/models/493996#profileId-407884" rel="nofollow noopener">Standard short sockets of 12-36mm diameter</a><a target="_blank" href="https://makerworld.com/en/models/495122#profileId-409200" rel="nofollow noopener">Deep sockets up to 68mm in height and 12-31mm in diameter</a> (Will be adding up to 39mm soon)<a target="_blank" href="https://makerworld.com/en/models/502884#profileId-418220" rel="nofollow noopener">the Deeper sockets up to 100mm in height and 12-39mm in diameter</a><a target="_blank" href="https://makerworld.com/en/models/495080#profileId-409150" rel="nofollow noopener">Label inserts for all three sets</a>&nbsp;Features<ul><li>These holders will fit any socket set since you measure your own sockets and print the appropriate tray pieces</li><li>The tray system is based on the Gridfinity standard and will fit all standard Gridfinity bases</li><li>on the bottom of the trays, I included the standard 6x2mm magnet inserts. This helps keep the tray from coming out of their spot in the grid if you slam your tool drawers like I do</li><li>The optional label system designed was made to be very simple. Doesn&#39;t require magnets, Stays secure even when slamming the tool drawers.</li><li>NO Guess work needed, when sizing out you entire socket collection</li><li>Got extra random sockets? Print one off socket trays for each one to store in the corner of your drawer</li></ul>Instructions<ol><li>download and open the profile  </li><li>Take note of the current socket length(height standing). If this height + 6mm is taller than or equal to your storage drawer height…..<a target="_blank" href="https://makerworld.com/en/models/495122#profileId-409200" rel="nofollow noopener">go here to the 68mm length  horizontal set</a>. If your set is close in height you can do a test print of one single tray and test it with you socket in it while in a gridfinity grid base of your choosing. NOTE: you can find a skeletonized version of the Gridfinity grid that removes a few mm from the grid base if you are close to fitting and don&#39;t want to go to horizontal.  </li><li>measure your Socket diameter (do not use the socket size printed on the socket as the size you use to select a tray) This set is 12-36mm diameter by up to 100mm in length <img class="image_resized" style="width: 127.375px" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493996/design/2024-06-19_ae731cfec37d2.jpg">  </li><li>round the diameter up to the nearest whole number (ex. like the above, anything between 17.01-18.00mm goes to 18mm)  </li><li>Add a new empty plate and select it <img class="image_resized" style="width: 209.906px" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493996/design/2024-06-19_88b1516efebf6.png">  </li><li>Right click on the model for the needed size (in this ex. its 18mm) and hit clone, it should clone to the selected empty plate <img class="image_resized" style="width: 201.177px" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493996/design/2024-06-19_dd40c5c6fe8ae.png"></li><li>Repeat for all socket sizes needed and then print. <img class="image_resized" style="width: 24.58%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493996/design/2024-06-19_24828fbfde9c9.png">  </li><li>go to my profile to find the <a target="_blank" href="https://makerworld.com/en/models/495080#profileId-409150" rel="nofollow noopener">Label inserts</a>, premade with many common sizes. linked below. Or just ignore the label part of this if you don&#39;t want to do it. (the labels make it look really nice and easy to read everything and return it to the right spot in an instant.)  <img class="image_resized" style="width: 348.781px" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493996/design/2024-06-19_4638d3fbeb1f.jpg"></li><li>For your sockets that are less than 68mm in length but longer than will fit in the drawer standing, go to <a target="_blank" href="https://makerworld.com/en/models/495122#profileId-409200" rel="nofollow noopener">this model</a> For your sockets that are equal to or more than 68mm in length up to 100mm in length, go to <a target="_blank" href="https://makerworld.com/en/models/502884#profileId-418220" rel="nofollow noopener">this model</a></li></ol>IssuesIf a description is still below here, then I haven&#39;t fixed it yet. If you find any new issues or typos in my model pages, let me know in a comment or a message an I&#39;ll try and resolve it as soon as possible.&nbsp;<ul><li>The larger sizes above 31mm begin to have trouble fitting the labels with the limited space due to the size of the socket, and making it work into a 1x1 grid. I will most likely remodel the large sizes to be a 2x1 grid to give more room for the label. If this is an issue for you to not have the larger sizes fully labeled then move them to the Horizontal trays. I am thinking of another way to label these ones without going to a 2x1 to keep uniformity.</li></ul>

Tool Storage

Figurines