Best one out there. Very easy to add the cloth. Thanks

Great for keeping small things that you need often. The finger scoop means no digging around or having to dump the contents to get what you need.

My go-to filament clip for Bambu spools. I never have to remove these as they don't interfere with my AMS. I print them in bunches and keep them handy.

Nice work! Thanks

These do a great job. Thanks! The only improvement I would suggest are details on how to orient them when installing. If they aren't turned in the right direction and placed perfectly, they won't cooperate. Figuring this out drove me nuts.

Top notch fit. It snaps into the Sunlu spool wonderfully. I would probably use more of these if the Sunlu spool worked in my AMS better. That spool flops all around.

This fit my Delta 36-725 perfectly. There is no slop, it is a good tight fit. However, I am wondering why it is designed for only metric nuts. There is not an imperial option even on the generator. Could we please get an option for a 1/4-20 bolt. Metric bolts can be found but I have a lot of imperial stuff cluttering up the workshop already. Thanks!

I made several of these out of PLA which I have been using in my bare studs, no ceiling shop with no climate control. After a full year of heat up to and above 100 degrees and well below freezing they are as good as new. They work great and I'm very happy.

Works great!

I changed the x axis to 80% to get an oval shape like a spoon, then switched the color from Bambu Basic Black to BB Beige for the top 10 layers. It's no longer a black blob on my countertop and is easier to spot and fits in well. This is really easy to customize. Thanks!

I tossed the first print into the trash because of all the supports filling up the spaces for the AMS base. I then let Bambu Studio reorient the parts and reprinted. They came out great. It took a little trimming to get the axes for the bearing rounded out. Once done the bearings and knobs needed a good pressure fit, from the base of my hands on a hard surface. I printed mine with PLA and they fit the base of the AMS perfectly and don't need the new screws. They also press fitted the AMS base. They use of the 608 (skate board) bearing was a great idea. Excellent print. Thanks!

Works with my Delta 36-725, the model previous to the one this was designed for. Nice tight fit that I don't need to worry about slipping out of place and causing a problem with the saw or a cut.

So much better than the JessEm template and less expensive. Thanks!

I have printed many different designs similar to this one. This is the best I've found but it finally failed in the same way as all the other designs. I lasted longer but finally came apart where the threads on the body attach the cap. Here the layer lines failed at the base of the threads. I printed a new one along with a cylinder that fit inside, glued in too reinforce the transition from body to the threads. I don't know if this will solve the problem but I'm sure it will prolong its life. Otherwise, I like this design. Thanks!

A very good handle for the A1 Mini. Good design with one small flaw. As you can see in the photo, I had to trim one very small piece from the print to get it to fit through the trapezoidal holes in the plate. The diagonal divider is fractions of a millimeter to wide. On all four prints I had to cut a tiny slice off the same edge to get it to fit through the holes in the plate. With that done I'm very happy with the plate.

Great organizer box. Well designed. I have made multiple copies for myself and a friend. Prints well.

Nice print that helps me keep my good pens organized and a place to put them away so I don't lose them. Pens fit nicely.

Well designed. I printed one and then decided that I was not comfortable using it with my glasses without some kind of protection for the lenses. I worried about the lenses getting scratched while banging around in the case.

Great selection of dividers for the Organizer Box Small Double. Makes it easy to customize the box. Very useful set. Thanks!