jrh18

LD3d_lab

Skull

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right.&nbsp;Dimensions: 180x180&nbsp;Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. The print is a 180x180, it can be printed safely without AMS and on any printer. I hope you like it, if you want to support me put like and let me know what you think!&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Nozzle: 0.4

HueForge Dragon

other

the_bearded_jedi

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Overture Space Gray Transmission Distance: 2.1 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA PolyLite Yellow Transmission Distance: 11 PLA Default White Transmission Distance: 5!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Space Gray At layer #9 (0.8mm) swap to Light Gray At layer #13 (1.12mm) swap to Red At layer #18 (1.52mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest.&nbsp;If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.https://www.patreon.com/sblayeredcreations

Mandalorian Hueforge

star wars

grecdel

Spider Gwen Portrait worked on HueForge.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments & Swap Instructions :<ul><li>Start with PLA BambuLab Black</li><li>At layer #5 (0.4mm) swap PLA BambuLab Basic Magenta</li><li>At layer #8 (0.56mm) swap to PLA BambuLab Basic Pink</li><li>At layer #11 (1.28mm) swap to PLA BambuLab White</li></ul>&nbsp;Enjoy !

Spider Gwen (HueForge)

marvel

kerngebiet

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course.The following Makita tools have been tested so far in the 40mm version:<ul><li><a target="_blank" href="https://amzn.to/43EvbGk" rel="nofollow noopener">Makita DTD171</a></li><li><a target="_blank" href="https://amzn.to/418LxoO" rel="nofollow noopener">Makita DDF484</a></li><li><a target="_blank" href="https://amzn.to/3KH0RSL" rel="nofollow noopener">Makita DDF484B</a></li><li><a target="_blank" href="https://amzn.to/3KKXTMS" rel="nofollow noopener">Makita DHP484</a></li><li><a target="_blank" href="https://amzn.to/3L1Jk99" rel="nofollow noopener">Makita DDF459</a></li><li><a target="_blank" href="https://amzn.to/41iBQUT" rel="nofollow noopener">Makita DHP481</a></li><li><a target="_blank" href="https://amzn.to/3GNdGK7" rel="nofollow noopener">Makita DTW300</a></li><li><a target="_blank" href="https://amzn.to/3UJI2D4" rel="nofollow noopener">Makita DTW302</a></li><li><a target="_blank" href="https://amzn.to/3ojGUKh" rel="nofollow noopener">Makita DHG180</a></li><li><a target="_blank" href="https://amzn.to/3obRMJP" rel="nofollow noopener">Makita DHG181</a></li><li><a target="_blank" href="https://amzn.to/46xfsJ9" rel="nofollow noopener">Festool T18+3</a></li><li><a target="_blank" href="https://amzn.to/40VRPc2" rel="nofollow noopener">Milwaukee 2553 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3TgM9rB" rel="nofollow noopener">Milwaukee 2504 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3RqUbNf" rel="nofollow noopener">DeWalt DCE530</a> **</li><li><a target="_blank" href="https://amzn.to/40XWAlF" rel="nofollow noopener">DeWalt DCD771</a> ** (seems also to fit in 35mm)</li><li><a target="_blank" href="https://amzn.to/3Gijfj2" rel="nofollow noopener">DeWalt DCF887</a> ** (seems also to fit in 35mm)</li><li>DeWalt DCF885 ** (seems also to fit in 35mm)</li><li>DeWalt DCD985 **</li><li><a target="_blank" href="https://amzn.to/40W9IHO" rel="nofollow noopener">Surebonder Ultra DT-3100FAMZS</a> **</li><li>Porter Cable PCC601</li><li>Porter Cable PCC641</li></ul>The 35mm version fits good for:<ul><li><a target="_blank" href="https://amzn.to/3L8u4HD" rel="nofollow noopener">Makita DDF487</a></li><li><a target="_blank" href="https://amzn.to/41BBmsN" rel="nofollow noopener">Makita DHP487</a></li><li><a target="_blank" href="https://amzn.to/3sUPVMj" rel="nofollow noopener">DeWalt DCD778</a> **</li></ul>The wide version fits:<ul><li><a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">Makita DWT700</a> **</li><li><a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">Makita DWT701</a> **</li><li>Ryobi PBLIW01 **</li></ul>Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this.<h3>Printing</h3>Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need ~220g of filament for this. ;)<h3>Update 04.05.2023</h3>I've added another design for the holder, based on the idea of <a target="_blank" href="https://www.printables.com/@mnemic" rel="nofollow noopener">@mnemic</a>. I has the same sizes as the other, but saves even more filament.<h3>Update 06.10.2023</h3>I've added a wider version of the holder, for Tools like the <a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">DWT700</a> or <a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">DWT701</a>. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm.&nbsp;* = Amazon Affiliate Links ** = Information from users who printed the model

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool, ...)

woodworking

Chewmieser

Gridfinity bins for a 21-piece Dewalt imperial drill bit set. This set fits within a 4x3 gridfinity grid and was originally intended for use in a Kobalt Mini Toolbox (fits all sections; bins are 3u in height).&nbsp;Would suggest printing with a &lt; .6mm nozzle, otherwise the text on the smaller bins wont come out properly (see cover photo).&nbsp;Bin blanks created using the GridfinityGenerator Fusion 360 add-in.

Gridfinity 21-Piece Imperial Drill Bit Holders 

gridfinity

Makers.m3D

<h2>DESCRIPCIÓN DEL MODELO 3D</h2>Katana Plegable de Tanjiro V2 de Demon Slayer Kimetsu no YaibaLa probé en PLA+0.4 Hotend, 0.2mm layer, 2 walls, 15% infillSi tienen problemas al imprimir las hojas pueden poner una balsa interior y exterior para luego retirar.Recomendaciones: 1. Cerrar hoja por hoja de abajo para arriba sosteniendo el pomo inferior y no el mango, esto ayudara a la durabilidad. 2.Tener cuidado con la punta. 3. No abrir con demasiada fuerza, no es necesarioPara la pintura recomiendo pinturas acrílicas y luego una capa de resina sobre la parte pintada para que aguante la fricción.VIDEO DEL MONTAGE <a target="_blank" href="https://vm.tiktok.com/ZM6faof5t/" rel="nofollow noopener">https://vm.tiktok.com/ZM6faof5t/</a> https://www.tiktok.com/@makers.m3d/video/7319250267549994246?_t=8mmUAXEjqcg&amp;_r=1PERFIL <a target="_blank" href="https://cults3d.com/es/usuarios/Makersm3D" rel="nofollow noopener">https://cults3d.com/es/usuarios/Makersm3D</a>REDES <a target="_blank" href="https://linkfly.to/Makersm3D" rel="nofollow noopener">https://linkfly.to/Makersm3D</a> DEPENDIENDO DEL APOYO A ESTE MODELO IRE SUBIENDO LAS DEMAS KATANAS  GRACIAS!!<h2>PARÁMETROS DE IMPRESIÓN 3D</h2>0.4 Hotend, 0.2mm layer, 2 walls, 15% infill PLA+ Si tienen problemas al imprimir las hojas pueden poner una balsa interior y exterior para luego retirar.

Tanjiro Katana v2 (Demon Slayer  Kimetsu no Yaiba)

swords

Settlers

This lampshade is designed for the <a target="_blank" href="https://makerworld.com/sv/models/13717#profileId-13429" rel="nofollow noopener">Bambu Led Lamp 001</a> kitUse the lamp base from the original model together with this lampshade.&nbsp;Try out various colors and textures of filament for your own special touch 💡☺️👌And feel free to share photos of your results!&nbsp;Find more lampshades to the Led Lamp Kit in <a target="_blank" href="https://makerworld.com/en/u/4081361372/collections/36888" rel="nofollow noopener">this collection</a>

Sapphire - Lampshade for LED Lamp 001

lamps

squinn

This plant support cage is designed with an open side so that you can more easily add it around plants that have already grown, allowing you to more gently add support for leaves, fruits, and vegetables without stressing the branches. The strong & stackable design allows you to meet whatever height is needed.&nbsp;This is an easy print that requires no supports, and the STL is oriented as it should be for printing. Three heights are available at 11 cm, 16 cm, and 21 cm tall (the one shown in the pictures is the shortest of the three). All are 10 cm wide, but this model should also easily support scaling as well if you'd like a different size.

Open Cage Stackable Plant Support Stakes

gardrning

Devnsyde

X1C/X1/AMS/P1S Lid handle cap - cosmetic - printed with PLA, Deadpool, Superman, Batman, D&D, and a basic no logo cap.&nbsp;This cap will work both on the AMS, and on the top glass lid of the X1 and the P1S printer.&nbsp;Each individual cap takes 7 minutes to print, however with all the printer configuration steps and adjustments that it does it takes about 15 minutes each cap.&nbsp;***UPDATE***Just uploaded a couple new plates that also have Dungeons and Dragons, Batman, and Superman logos on each. If you would like to see more please let me know or just make a remix using the base cap.&nbsp;