jpriss

music

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

shoes 

MintPrintz

AI generated image of Nami from one piece in a steampunk style. Only three colors used. White, orange, black

Nami Steampunk 

tableau 

SASSy Design

A simple but playful design inspired by the small patterns of paws pressed on fresh concrete.&nbsp;Print information:<ul><li>Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)</li><li>Recommended using a lower layer hight (0.15/0.2mm) for better results in details</li><li>Prints very good in any filament</li><li>The model is scalable to your liking</li></ul>Happy printing!

Animal Paw Plant pot Planter - Vase mode design

vase

Cinderwing3D

Hello everyone!  Today I want to present to you the first ever completely free Cinderwing3D Dragon - The Bamboo Dragon! Bambulab reached out to me asking if I wanted to make a dragon for them and seeing how I use their printers for prototyping.... it was an easy yes!As with all my designs this model is an easy print-in-place and requires no supports. All you need is a clean bed and you&#39;re off! I also have included two 3MF files for multicolor, as shown in the pictures!  Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. Please feel free to join our <a href="discord.gg/cinderwing3d" rel="nofollow">Discord</a> chat for help and discussions. Filaments used were Bambu Green PLA Basic, Bambu Red PLA Basic, and Gold Bambu Silk PLA! <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=3729583&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Feel free to use my affiliate link to grab some for yourself!</a> The Green Gradient filament <a target="_blank" href="https://amzn.to/3Htn19A" rel="nofollow noopener">can be found here!</a> The Green and Brown Gradient <a target="_blank" href="https://amzn.to/47N8EYF" rel="nofollow noopener">can be found here!</a> And the Tricolor<a target="_blank" href="https://amzn.to/3UfR3W3" rel="nofollow noopener"> is here!</a> ----- Hi, I&#39;m Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale.  The Digital files are never to be re-sold, shared, or given away!<h4>Commercial License and monthly bonus models: <a target="_blank" href="https://than.gs/u/1780858?plans=true&amp;affiliateCode=jazzyplz" rel="nofollow noopener">Thangs Memberships</a> <a target="_blank" href="https://www.myminifactory.com/users/Cinderwing3D?show=tribe" rel="nofollow noopener">Tribes</a> <a target="_blank" href="https://www.patreon.com/cinderwing3d" rel="nofollow noopener">Patreon</a></h4><h4>Please see our other public models here: Check us out on our socials! <a target="_blank" href="https://www.facebook.com/cinderwing3d" rel="nofollow noopener">Facebook</a> | <a target="_blank" href="https://twitter.com/cinderwing" rel="nofollow noopener">Twitter</a> | <a target="_blank" href="https://www.instagram.com/cinderwing3d/" rel="nofollow noopener">Instagram</a> |<a target="_blank" href="https://tiktok.com/@cinderwing3d" rel="nofollow noopener"> Tiktok</a></h4>

Bamboo Dragon Cinderwing3D X BambuLab

animals 

YeetYeet

Compound crossbow made primarily out of 3D printed parts. This is not a toy. Crossbow had measured 70 lbs of force, but this depends on the amount of tensioning and used PETG strength.BOM and instructions are in the provided pdf assembly manual. I would recommend reading the pdf before starting this project.All bolts used are Hex socket head (DIN 912) The crossbow has picatinny rail which can be used to mount a scope. Feel free to use the provided .step file to create new improvements and accessories. If you want to support me: <a target="_blank" href="https://www.buymeacoffee.com/yeeterinofuckerino" rel="nofollow noopener">☕Buy me a coffee</a> BTC: bc1qnh6fvegp45zzy8gw5elg0heyrgq5rjuxpa5al0

70 lbs Compound Crossbow

armes

Nakozen

The Hubble space telescope, the largest single big metal tube currently in Earth orbit, has been gazing into the cosmos since 1990, taking some of the most influential photographs of our time. The first in a new series of model kit cards I am working on, a fair bit more detailed than past projects. This has the original solar panels, and can add the replacement gold panels at request, I just like these better! Coming up next: Euclid deep-space observer! (or that other funny lookin' Dorito one) There are no instructions of this model, but each part is numbered in order of assembly, and there are clues on the parts themselves. So go slow, don't pop every part out at once, and have fun! =================== Included is a Frameless variant for those uninterested in the sprue card format (refer to photos for assembly help). There is also a small test piece for those unsure about the flex joints, of which I have no problem printing both on Enders and a P1P. If the fit is too tight, I suggest setting outer walls to print first in your slicer. You can make it EVEN TIGHTER by increasing the Z-scale by 15%.Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. Makes greatly appreciated, always glad to see them! Happy Printing!===================<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them, however licenses are available via Ko-Fi and Printables Clubs!If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships, or Printables Clubs!

Hubble Telescope Kit Card

kit card

MottN.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, consider giving it a boost to support the creation of more cool stuff! Thanks!</boostcontent></boostme><ul><li>Update 2023_11_15: added links to finger tracks XL for anyone struggling to get the print to work.</li><li>Update 2023_11_13: Updated files to chamfer some additional corners on the tread to feel nicer.</li><li>Update 2023_11_10: Updated models and print profile. Model is optimized to print better and the track will be much more reliably free running.</li></ul>&nbsp;Everyone needs some tracks to drive around with their fingers!This is a very satisfying and fun fidget, and also my first print in place model :)&nbsp;When first printed each track joint may take a tiny bit of force to free up; after that the tracks should run freely with little effort.&nbsp;To remove track:If it continues to be difficult to run, or has a sticky spot, you may have to remove the track to completely free up.This also makes for an easy multi-color model; print in two colors and swap tracks! (Don&#39;t risk this if your material doesn&#39;t have good layer adhesion like some matte or silk PLAs, you will break the track pegs.)&nbsp;To remove the track, hold with the connected side of the track body down, and with your fingers apply pressure on the wheel hubs to bend slightly inwards. This should provide enough clearance that the track can easily be removed.Replacing the track is slightly more difficult but follow the same basic strategy of flexing the track body.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-13_dd9789575054a8.gif"></figure>&nbsp;PrintingThe model is made to work with and 0.4mm nozzle and 0.2mm layer height. If you use a larger layer height some gaps will be fused together by the slicer.&nbsp;If you are having trouble with your first print try a different filament, and please start with something simple like a plain PLA. Some specialty colors like silks mainly and some mattes lack the strength for this design to work well. Also, I strongly recommend printing In PLA; PETG tends to be hard to print things with small gaps without stringing or blobbing. Not that it&#39;s not possible, but you will probably have better luck with PLA, and no reason really to print in something more fancy.&nbsp;&nbsp;Print in the orientation shown below or as in the print profile.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-07_d1b42cc880c0e.png"></figure>&nbsp;If you want to print several different colors, you can fit 5 on the build plate in print by object mode. Then just print overnight or come back in ~10 hrs. I&#39;ve uploaded this profile as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-10_af9cff3ff21ad.png"></figure>&nbsp;Related cool stuff!If you are having trouble with durability of the pins or tracks, or just not being able to get things to free up, check out the Finger Treads XL model. It has bigger pins and is a little more forgiving because of its larger size. It&#39;s big enough its not quite as good of a fidget, but still a very satisfying print in place model and fun to play with.&nbsp;Get it here: https://makerworld.com/en/models/65624#profileId-68957&nbsp;Size comparison below - XL version top.<figure class="image image_resized" style="width: 32.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_b4cf6d1a056c8.jpg"></figure>&nbsp;&nbsp;&nbsp;If you have printed a bunch of these and need something to do with them, check out the Benchy-Dozer!https://makerworld.com/en/models/85433#profileId-91329<figure class="image image_resized" style="width: 41.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_c16db6c5576808.jpg"></figure>&nbsp;

Finger Treads Fidget Track - Print In Place

figet

TheProb

I've created a 3D printable model from a funny Futurama poster, and modeled it to be printable in 3 different colors.Uploaded a .3mf file which is ready to print and 3 separate .stl for each color.&nbsp;If you are satisfied with my design, I would be delighted if you could support me!<figure class="image image_resized" style="width:29.35%;"><a href="https://ko-fi.com/theprob" target="_blank" rel="nofollow noopener"><img src="https://storage.ko-fi.com/cdn/brandasset/kofi_button_red.png"></a></figure>

Futurama - You are not paid to think poster

divers

SPStudio

AMS Buffer Fix For Failed To Pull Back Filament Error

bambu accessories 

spencerwondo

This is a toroidal propeller, which is quiter and more efficient than a traditional propeller. This model was created for an experimental submarine project but it may be used for other purposes. It is designed to fit a specific propeller shaft. &nbsp;<a target="_blank" href="https://www.amazon.com/uxcell-Propeller-Universal-L130mm-Sleeve/dp/B07Q32MGV6/ref=sr_1_38?crid=GTA45A6JPKOD&keywords=rc+propeller+shaft&qid=1697407177&sprefix=rc+propeller+shaft%2Caps%2C107&sr=8-38" rel="nofollow noopener">https://www.amazon.com/uxcell-Propeller-Universal-L130mm-Sleeve/dp/B07Q32MGV6/ref=sr_1_38?crid=GTA45A6JPKOD&keywords=rc+propeller+shaft&qid=1697407177&sprefix=rc+propeller+shaft%2Caps%2C107&sr=8-38</a> &nbsp;The Diameter of the Propeller is 120mm and has 8 “Blades”

Toroidal Propeller [8 Blades]

propeller 

FinEngineer

Beautiful one piece airliner print. You can choose version without stand mounting holes, or version with stand mounting holes. There are also stand model for the plane.&nbsp;&nbsp;Print settings-Nozzle 0,4 mm-Layer height 0,12 mm-Perimeters/wall line count 3-Infill 20%&nbsp;Print instructions-Find out best Z-seam setting for hiding the seam-Raise the model lowest point 2 mm above build plate, you may change your slicer setting to allow that. (See picture how to switch that setting in Cura)-Recommended model alignment exactly horizontal. (See picture from slicer)-If stand mounting pins fit too loose, you can use some glue, or tweak your slicer settings-Use support blocker below plane stand mounting holes if printing stand version&nbsp;Minimum build plate size: 203 mm x 175 mm&nbsp;Please ask if you have any questions or improvement suggestions!

Airplane print in place

flying 

Aruba3D

A simple keychain of a filament spool

Spool Filament Keychain / Llavero bobina filamento

Keychain 

TrocheHole

<figure class="table" style="width:60%;"><table class="ck-table-resized" style="background-color:#f5f5f5;border:12px solid #f5f5f5;"><colgroup><col><col></colgroup><tbody><tr><td style="padding:8px;vertical-align:top;">[ Information ]A sister model of this “Split Ring” is available on the following page.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/16181" rel="nofollow noopener">“Oval Carabiner (7 sizes)”</a></td><td style="text-align:center;width:30%;"><a target="_blank" href="https://makerworld.com/en/models/16181" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/203986/2023-09-22_903g3lqlgpap.jpg"></a></td></tr></tbody></table></figure><h4> </h4><h4>2 shapes and 6 sizes each.</h4>A removable ring that is harder to use than carabiners. But I wanted something sturdier with a simple shape, so I designed this.&nbsp;<h4>2 types of data are available for each ring.</h4>[Easy-to-Print] ─ Larger tolerance. The end of the ring-line comes off easily. [Hard-to-Print] ─ Smaller tolerance. The end of the ring-line can be held in place.&nbsp;&nbsp;<h3>Print Instructions</h3>If the printed ring sticks together and does not open, try scaling up an Easy-to-Print model in a slicer app. (e.g. 120% or more) This will increase the clearance between the inner and outer rings and make it even easier to print.Brims/Rafts ─ Doesn't MatterSupports ─ No&nbsp;<h3>Post-Printing Tips</h3>Even if the inner and outer rings are stuck together after printing, it may come off if you pinch it with both hands and wriggle it.&nbsp;&nbsp;<h3>How to Use</h3>Open ─ This split ring does not open horizontally. To open it, shift the end of the outer ring-line vertically.Close ─ There are notches on both ends of the ring-line to hold them in place. Therefore, the inner end needs to be fitted first to close the ring. The outer end should be fitted last.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/203986/2023-09-22_vsdi7j2sn9hk.jpg"></figure>&nbsp;<h3>Sizes</h3>Shape No.* ─ external dimension (and width of the ring-line)Circle No.3 ─ DIA14.1 x T2.4 mm (3 mm) ─ similar in size to a fingernail Circle No.4 ─ DIA18.8 x T3.2 mm (4 mm) Circle No.5 ─ DIA23.5 x T4.0 mm (5 mm) Circle No.6 ─ DIA28.2 x T4.8 mm (6 mm) ─ similar in size to a plastic bottle cap Circle No.7 ─ DIA32.9 x T5.6 mm (7 mm) Circle No.8 ─ DIA37.6 x T6.4 mm (8 mm)Oval No.3 ─ W19.5 x L14.1 x T2.4 mm (3 mm) ─ similar in size to a fingernail Oval No.4 ─ W26.0 x L18.8 x T3.2 mm (4 mm) Oval No.5 ─ W32.5 x L23.5 x T4.0 mm (5 mm) ─ similar in size to an SD card Oval No.6 ─ W39.0 x L28.2 x T4.8 mm (6 mm) Oval No.7 ─ W45.5 x L32.9 x T5.6 mm (7 mm) Oval No.8 ─ W52.0 x L37.6 x T6.4 mm (8 mm)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/203986/2023-09-22_0v23d88ecbk7.jpg"></figure>&nbsp;