joshgibbons

Alessandro Baggio (ABproduction)

ballet dancer Keychain&nbsp;-----------------&nbsp;Portachiavi ballerina classica sulle punte

ballet dancer Keychain - Portachiavi ballerina

Ballerina & Dance

Uncle Joeys Creations

Made this for all the golfing Dads out there!&nbsp;Comes with 4 in the file. Keychains I got off Amazon.&nbsp;Enjoy!

Best Dad by Par

Family

enricoRE

Old Train HueForgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmDon't scale Z heightSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Orange At layer #16 (1.36mm) swap to Yellow for the rest.

Old Train HueForge

Transportation

dstroup92

These are ready to print and wear for Easter. Color change done by layer but can be done using painting tool.

Cute Easter Egg Earrings Ready to Print, Color Change Done By Layer. 

Jewelry

LorenzCR

Bring serenity and harmony to your home with this 3D print depicting two chicks in love.

Chicks in love

Wall Decor

DrKriegerAUS

Update 27/01/2024:My last set of models for a while - some straight stackable ramps:<a target="_blank" href="https://makerworld.com/en/models/158553" rel="nofollow noopener">https://makerworld.com/en/models/158553</a> These can be printed instead of the original ‘curved’ ramps if you want your ramps to stack&nbsp;Update 26/01/2024:After extensive play testing, my son dropped a few suggestions into the suggestion box for me. I've added some new parts to the ‘starter pack’.<ol><li> A ‘bumpy road’ piece which either sits on the ground, or across two support pieces. This is now found on plate 8.</li><li>A ‘pin’ (m) version of the straight stackable ramp. The original only had a socket. Plate 6 used to have two ramps with sockets, now it has one with a pin and one with a socket</li><li>A ‘joiner’ piece which is only 10mm high but is stackable. This piece can be used to put other blocks at a custom height, or to help lock everything in place for kids who want a ‘gap’ to jump but don't want the ramps sliding around. I've put two on plate 9. </li></ol>Check out the last few photos for examples. &nbsp;Update 16/01/2024: New parts available:Crushed Cars - <a target="_blank" href="https://makerworld.com/en/models/141716" rel="nofollow noopener">https://makerworld.com/en/models/141716</a>Shipping Container Backflip Ramp - <a target="_blank" href="https://makerworld.com/en/models/141874" rel="nofollow noopener">https://makerworld.com/en/models/141874</a>Oil Drums to Smash - <a target="_blank" href="https://makerworld.com/en/models/141931" rel="nofollow noopener">https://makerworld.com/en/models/141931</a>These are on their own pages so I can attribute models I've ‘remixed’ correctly. &nbsp;Your little one (or you, I won't judge) can now build their own Hot Wheels Monster Truck Stadium!Simple model but a lot of fun for little hands. The pieces interlock loosely and in may combinations for hours of fun!I printed in PLA3 layers top bottom and side15% Rectilinear infill (it seems to give a nice smooth finish on the ramps)The square support with holes can be printed with lightning infill to save a lot of time and filament, as the through holes give the top plenty of support, but I recommend at least 4 bottom layers if you choose to do this.

Hot Wheels Monster Truck Ramp Starter Set

disc golf

Resin Snobz

Melting popsicle / ice cream for home decor. The file provided prints the items separately so the is no waste from your machine “pooping”! Please be sure to rate and like, I appreciate you!!&nbsp;Commercial use for ALL my files here: <a target="_blank" href="http://tinyurl.com/yrermv2w" rel="nofollow noopener">http://tinyurl.com/yrermv2w</a>

Melting Popsicle Display/Art

Food

Justin_Floor

My wife loves music and saw some cute earrings online. I decided to make her a valentines set that had my love and her love for music all put in one.

Muisc Staff with Treble Cleff & Hearts

Music

Aurillion

Update 05.Feb.2024 : I have added an STL with 0.1 mm narrower arm connections in case there are problems with it being too tight.Loving bear Valentine's Day greeting - 3D Kit Card&nbsp;Description:🐻💖 Surprise your loved one with this adorable 3D kit card model - the perfect gift for Valentine's Day! This cute bear holds a heart that says "Happy Valentine". But that's not all! I've also added an additional model where you can add your own text to the heart using the Bambu Slicer - be it a sweet love saying or a personal message like "Love u".&nbsp;🌈 Multicolor design: The diverse color options allow you to adapt the model to your loved one's preferences. Experiment with different filaments to find the perfect combination for your bear love.&nbsp;🧩 Easy to put together: The individual parts of this kit card are designed to be easily cut out and pinned together. The connections vary depending on the filament.&nbsp;💝 A gift with a heart: This 3D kit card is not only a sweet gift, but also a creative way to express your love. Add your personal touch and make this Valentine's Day unforgettable.&nbsp;Download the model now and get ready for a heartwarming surprise on Valentine's Day! 🎁✨

Valentine Kit Card

Card Kits

michal0082

And we have another puzzle for children. Now it&#39;s a cute teddy bear. The model is intended for AMS. Update: Responding to numerous requests, I&#39;ve included a box for convenient puzzle storage.&nbsp;&nbsp;Do you like my work and would you like to support me? There&#39;s nothing easier than giving me a BOOST ticket.&nbsp;&nbsp;More toys here:<a target="_blank" href="https://makerworld.com/en/u/1621874954/collections/441100" rel="nofollow noopener">https://makerworld.com/en/u/1621874954/collections/441100</a>&nbsp;

Bear puzzle

Puzzles

cruse2382

simple flexible star bauble, prints in place

flexi star bauble print in place

Primary

Williams Industries

We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>Patreon includes commercial use on all prints.

Mario Ornament

ornaments

Mimi home decoration

print in 0,2 no support&nbsp;my others design <a target="_blank" href="https://makerworld.com/en/u/2044748376" rel="nofollow noopener">https://makerworld.com/en/u/2044748376</a>

Mother's day decoration

Holidays

3DPrintNovesia

<h3>Print order:</h3><ol><li>Rose Shaft(0,1mm Layerheight for the first 3 Layers)</li><li>Pin</li><li>Blossom (0,1mm Layerheight)</li></ol>&nbsp;<h3>Assembly Instructions: Rose shaft:</h3><ul><li>After Printing the the shaft hold it in the direction it was printed and use heat from a lighter under each green leaf. </li><li>Just a small and quick flame. You will see that the leaf will instantly curl into the right direction. afterwards you will have a leaf “bowl” on top of the rose shaft.</li><li>If you want bigger leafs, just use a brim!</li></ul><figure class="image image_resized" style="width:39.03%;"><img src="https://media.prusaprinters.org/media/prints/131746/rich_content/fdb8a623-3de2-45bf-95d8-a25301d8cb9d/ezgifcom-gif-maker-1.gif#%7B%22uuid%22%3A%2242ec431a-2589-4389-83a8-74c4b751d1bb%22%2C%22w%22%3A400%2C%22h%22%3A707%7D"></figure><h3>Blossom:</h3><ul><li>After Printing the Blossom curl it up from the side without the hole. If you have a bit trouble to wind it up, use warm water or a hairdryer to soften the petals! </li><li>The Last piece (Hole) need to be bended under the Blossom as a “base” you can use a bit glue to hold down the Blossom to the Base part.</li><li>If you want bigger Petals, just use a brim!</li></ul><figure class="image image-style-align-center"><img src="https://media.prusaprinters.org/media/prints/131746/rich_content/69d203f3-09a3-4f78-bb13-50172dcf1830/ezgifcom-gif-maker-4.gif#%7B%22uuid%22%3A%22aabf3d65-ca76-417b-80b0-4bd0896d944c%22%2C%22w%22%3A320%2C%22h%22%3A320%7D"></figure><h4>If you like, you can also lasercut the blossom out of some thin material. just use the svg file!</h4><h4>Important! Don't print the blossom file thicker than 0,3mm. Otherwise it will be to thick to wind it up! </h4>&nbsp;After these Steps you can push the pin trough the middle of the blossom through the hole in the base of it and mount it (with a tiny drop of glue) onto the shaft! And you are Ready with your realisic 3d rinted rose with filigree petals&nbsp;<figure class="image image-style-align-center"><img src="https://media.prusaprinters.org/media/prints/131746/rich_content/5994e66d-ef08-47af-90c0-27183e8f3db6/c1c3c344-5a59-44cd-89e7-3a7e14ecb0a4.gif#%7B%22uuid%22%3A%221c06281a-242d-41c8-8444-2914badee952%22%2C%22w%22%3A270%2C%22h%22%3A360%7D"></figure> Filament used: Redline Raspberryred: <a href="https://www.redline-filament.com/collections/silky-pla/products/silky-pla-himbeerrot" rel="nofollow">Red</a> Redline Apple Green: <a href="https://www.redline-filament.com/collections/pla-filament/products/pla-apfel-grun" rel="nofollow">Green</a>Here is a longer Video how to assemble it: https://www.reddit.com/r/3Dprinting/comments/srkuiz/someone_posted_my_design_of_a_3d_printed_rollup/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Super Realistic Rose (Roll-Up Design)

Nature

Kardes.Design

Fidget Phone Slider: a playful and tactile toy phone with a satisfying sliding action. The perfect blend of fun and fidgeting! Satisfying click sounds!&nbsp;2 parts with 8 magnets each. I made the holes a bit loose so you don't have to worry about the tolerances, just glue the magnets. (Please check the correct orientation before gluing!)&nbsp;I included a basic fidget version without the phone theme. it can be easily printed without the AMS of course.<figure class="table" style="width:48.82%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Basic version</td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152701/2023-11-07_47b787be2edc8.gif"></figure></td></tr><tr><td>Phone version</td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152701/2023-11-07_1262ac1c575bc.gif"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;Print instructions:Phone version:3MF files are available with all objects split for easy coloring.AMS is required for the phone version.You can remove the logo or the text by deleting the objects from the objects menu.Layer height: 0.2 Infill: 50% infill to give it a nicer heavy feel.&nbsp;Please don't change the orientation of the 3MF file. the parts that interact with each other should face the bed in order to get a smooth sliding.&nbsp;Basic version:please download the 3MF FILE. Its an easy print. The magnet hole size should face the bed. that way you sliding will be smoother.&nbsp;Layer height: 0.2 Infill: 50% infill to give it a nicer heavy feel.&nbsp;Supported magnets:8x3 mm (I tested mine with those)6x3 mm&nbsp;Please comment down below if you need it in another size.Let me know if you have any questions.&nbsp;&nbsp;

Fidget Phone Slider

Toys

Monariti

Found this PAC-man fidget and had to have it for my desk. It took me about a day to print complete and a small tube of gorilla glue. &nbsp;This is NOT my design i found this on thingiverse and colored and optimized print times in Bambu studio.

Pacman Chaser

pAC mAN

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Articulated Crystal Dragon by Saber3D

To Print

Thanksgiving

clehn8ok

Fidget Pill Organizer in Oreo Style, with 7 compartments 28mm x 12mm x 10mm&nbsp;See it in action:<figure class="media"><div data-oembed-url="https://youtu.be/tvKOu8KY6dk?si=vWfUTmmwWsBsnm-K"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/tvKOu8KY6dk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;everything is pressfit, but you can use some superglue just to be safe.&nbsp;prints withtout supports, but i'd recommend to print the two disks with support, since it ensures a better pressfit&nbsp;Assembly:<ul><li>Bottom</li><li>press in the white ring</li><li>insert the golden hub</li><li>press the white main body onto the white ring (you can use some superglue between the bottom and the main body, but keep the spring clear)</li><li>press on the top, note the direction of the cutout</li></ul>

Fidget Pill Organizer 

Oreo

kevr102

This is a fidget toy with meaning, this is a Little 3D Pocket Hug and not only does it feel very tactile to hold but each side in turn can rotate to reveal a 15mm photo, could be loved one's, family pet's etc etc, the hug has a very satisfying click when rotated due to the magnets and the hug also rotates on a 5mm Magnet axis, this is multiple 5mm magnets secured in both sides giving a stronger pull to create the axis.Small enough to fit in a pocket or purse.I used Bambu Basic Red and White for this hug and no support was needed.The Magnets are Neodymium and dimensions are 5mm Diameter 2mm depth.Designed with Fusion 360 and Printed with the BambuLab X1 Carbon.Thanks for looking.&nbsp;

Little Pocket Fidget Hug with Meaning

Hearts

K32Designs

Fun gyroscopic fidget toy in the theme of starwars the mandalorian.Engraved or embossed with the mythosaur and classic phrase “this is the way”&nbsp;ensure support are switched off otherwise the part wont spin freely.&nbsp;Can also double up as a drinks coaster if the engraved version is printed

Mandalorian Gyro Fidget Toy

Characters, Teams, Logos, etc

TKB-3D

Sword will suck itself in one way and shoot itself out if you reverse it! You can click it like a mechanical pen.&nbsp;Post Some Pictures of your Swords, I would love to see what color combos people come up with!&nbsp;Requires 12 6X3mm Magnets, easily found on Amazon for cheap and some Super Glue.After you do the below steps to get the Magnets in you will need to super glue the two half together. The little block that prints goes in the sword handle to help line up the side while the glue dries. And the Scabbard clips together but still need a little glue on the rims.&nbsp;Here a Tool to Help press the Magnets in if you have trouble. There are tight fit so they dont come out<a target="_blank" href="https://makerworld.com/en/models/21186#profileId-19454" rel="nofollow noopener">https://makerworld.com/en/models/21186#profileId-19454</a>&nbsp;Magnet Placement: have magnet North pointing out on one side of the sword and magnet South pointing out of the other side. And do the same with the Scabbard North pointing out on one side and magnet South pointing out of the other side. I recommend a tiny drop of glue under the magnets.<img src="https://makerworld.bblmw.com/makerworld/draft/51105/2023-09-24_07336d542414e.jpg">

Magnetic Fidget Sword

Fidgets

CYBR3D

This is a variant of my other, I Love Geocaching Keychain Tag. This one is flush, meant to be printed face down for the textured look with slightly different geocaching colors, yellow instead of white and a lighter green some folks might like, your choice.&nbsp; As an avid Geocacher, I haven't seen much for Geocachers on MakerWorld, so I figured I would share this I made for myself. This is a very nice Geocaching keychain tag to show your love for Geocaching. It holds up very well as I've had this on my keychain for a few months with no problems. I hope you enjoy my first model in MakerWorld. Please give me a 💖 and rate my model if you like it! THX&nbsp;&nbsp;

I Love Geocaching Keychain Tag V2

Keychains

Mark Hähnel

A nice and simple FTF coin for Geocache placers.Printable with 0.4mm nozzle but has the best look when printed with smaller nozzle sizes.

First To Find Coin (Geocaching)

Geocache Specific

ValdiLab

<h3>Model</h3>Author: @ArchiAle and @Valdos<h3>This stackable halloween themed coaster is one of a series is about to come to life, and they'll have in common the fact that is a good to watch, userful and stackable house commodity.</h3>This particular model has been printed with 0.16mm layer height, 0.4 nozzle, Basic Bambu PLA on a Textured PEI Plate.<h3>Use instructions</h3>It's a coaster, what did you expect? Jokes aside, the need for them started when finding your glass is always a painful research. End this disgrace right now, identifying your glass by your theme and/or by your colors! Enjoy your drinks and your prints! &nbsp;

S.C. - Stackable Coasters - Halloween Edition - Pumpkin Jack

Halloween

Coasters

Kit Crafters

<h2>MINI-CITY</h2>Welcome to MINI-CITY, where you create and customize your own city from the ground up. Starting with a tileable base plate, you can print out an array of building from a wide variety to choose from to begin piecing together your very own miniature metropolis. This first set of the MINI-CITY series comes with a modern house series, an apartment complex series, a tower series, an office series, and miscellaneous buildings to complete your very own city.&nbsp;Let me know what you think! I plan to make more buildings, baseplates, and other additions to this series and your support is greatly appreciated!<h3>Instructions:</h3>To make sure your building fit well into the base plate, try printing the fitment test profile to see if you need to adjust your X-Y hole compensation/contour compensation.&nbsp;This is my setting for SUNLU PLA+. The Bambu Lab PLA Basic filament works well with the default settings. <img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_7867989c75297.png">&nbsp;After your fitment test, try printing out one of the building series with a base plate or the profile with one of every building! The profiles provided have a color change right where the building starts to print so that the ground can be a color of your choosing and the building can be a different color. All buildings have the same color transition, thus minimizing the number of color changes to just one!&nbsp;There are several baseplates available, the largest one includes a hill, slanted streets, and the ability to connect with more baseplates.&nbsp;Try mirroring any of the buildings and baseplates to add variety and depth to your city as well.&nbsp;<h3>Modern House Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_c0dd505587ddb.jpg"></figure><h3>Apartment Complex Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_6ffa89a71cbad.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_446e131b2fd4f.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_cc90e3ce08d95.jpg"></figure><h3>Tower Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_8d10d5e35d404.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_e8740fe92ecaa.jpg"></figure><h3>Office Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_50d7b0bdf33d9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_e737526f6ac7c.jpg"></figure><h3>Misc. Series:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/115334/2023-10-23_0f6754d483f74.jpg"></figure>

MINI-CITY - Modular Miniature City Blocks

Mini Toys

JamesThePrinter

Tags for gifts and gift bags. Highly customizable with OpenSCAD. I have included 4 examples:<ul><li>Happy Halloween</li><li>Merry Christmas</li><li>Merry Christmas Mom</li><li>Merry Christmas Dad</li></ul>&nbsp;These tags are set up to print with up to three different colors using color changes at set heights.Options available:<ul><li>Font face &amp; size</li><li>2 lines of text</li><li>Spacing between lines</li><li>Text height</li><li>Border height &amp; thickness</li><li>Hole radius</li><li>Hole position</li><li>Base thickness</li></ul>&nbsp;Depending on settings, normally these tags can be printed in less than 15 minutes.Tips:<ul><li>If thin fonts or walls are not showing properly when sliced, a slightly smaller extrusion width may be needed</li><li>A 2mm base is thick enough for most situations</li><li>2-3 layers of the border and another 2-3 layers of text are recommended. Example - 2mm base, 0.5mm border, 1mm text</li><li>If no top line is wanted, choose “No Message” as the phrase</li><li>Some fonts create a rough border edge - in that situation, a thicker border may be needed to get a complete border</li></ul>

Gift Tag - OpenSCAD

Letters, Digits, Words, etc

nmonari

After hitting my head a few times (give me some ice, PLEASE), now I know very well that I often forget to close the doors of all those wall cabinets in my home.The edges are really hard and pointed, so in the past I've bought different kind of protectors to save my head (really I've never hit a protector, always those bare edges …).With a “good” 3D printer I've finally been able to design a protector that I could hope to bump, if I really can't avoid it.It was a simple project, a piece of PETG, 90° angled, and a TPU pad that could be coupled and positioned with double-sided tape on the edge.Trying it I found that some furniture doors are thinner than others, so my idea was to make an “editable” protector that could be reduced in size.The TPU is Filaflex A82 (so, obviously, NO AMS), the settings are GENERIC TPU with 2 walls and 15% infill. For the “enlarged” pad you'll need a support, usually I set the TOP Z at 0.27 mm and a picture shows you that removal has been enough easy.I used ESUN PETG, as I like it, but any good and dry filament should work well. You'll need a little bit of support for the pad connector…So I'm able to choose the filament colors more suitable for the piece of furniture the needs an edge protector.Good printing to everyone!!

Editable edge protector

Tools, Handy Gadgets

ItsNico

This is a print-in-place fidget toy intended to be put on the end of a pencil and spun. The connecter piece is completely my design, and the octopus is edited to allow for the connecter to snap on. Be cautious as this may damage the eraser of your pencil, but allows for it to snap on. The file includes 2 connecter pieces and one octopus. The topper is completely customizable, just make a cutout of whatever you want to make into a topper with the included file and print it along with some connecters!Tinkercad link to create your own design: https://www.tinkercad.com/things/0lZVxrNclw7-pencil-topper-template

Pencil Topper With Octopus

Animals

Pencil Toppers

LayerModels

First, second, third? Print your own trophies! These 3D printed awards pop-out as a gift at any competition or event.You can easily customize the trophy design in your slicer by adding text. Personalize the award with the name of the winner and competition name.&nbsp;If you like my designs you can support me by downloading one of the design trophies <a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/trophy-designs" rel="nofollow noopener">HERE</a>&nbsp;<a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/trophy-designs" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/562634/rich_content/ace02b22-3a5e-473b-aaee-4daf51f74b05/thumbs/cover/800x800/jpg/overview.webp"></a>&nbsp;3D PRINTING SETTINGS&nbsp;No support needed. Design is made so the name can be added on the top flat plane. This way you can easily add a pause in the slicer to change filament color.&nbsp;HOW TO ADD TEXT<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=IIATTmqf2qo&t=2s&ab_channel=Layermodels"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/IIATTmqf2qo?start=2" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>----------Subscribe to <a target="_blank" href="https://patreon.com/LayerModels" rel="nofollow noopener">my patreon</a> if you are interested in a license to sell your prints commercialyFollow me on <a target="_blank" href="https://www.instagram.com/layermodels/" rel="nofollow noopener">instagram</a> to stay up to date with my latest 3D Models

Trophy - Customizable award

Trophies & Awards

Toonafeesh

Customizable Christmas ornaments that can light up by inserting a standard christmas bulb in the hole on the back of the ornament. &nbsp;I created 4 scenes, but more will be added as I have time. Scenes include:<ul><li>Nativity Scene</li><li>Snowman</li><li>Santa</li><li>Grinch</li></ul>You can make your own scenes! Scene dimensions are 76mm x 76mm x 1mm. I'd love to see what you come up with!

Customizable Christmas Tree Ornaments

Christmas

Matthew

It seems silly to make this derivative it's own thing but it was a required change to enable the OpenSCAD mazes to be printed with the "spiralize the outer contour" option checked under the Expert Settings in Cura (or similar mode in other slicers). I added a cylinder to the object to make it solid... you are then free to print only the single outer wall. I decided that I had to try this after printing the lid to the maze with the spiralize option (see object <a href="https://www.thingiverse.com/thing:1988521" rel="nofollow">http://www.thingiverse.com/thing:1988521</a>).You might have to play with the measurements/scale slightly depending on your printer and settings. I printed the mazes and lids at 100% scale across the board as long as the lid and maze are made of the same material. If you are mixing/matching materials then you will have to scale of the items slightly up/down up to 2% depending on the material.The example prints photographed above have the bottom 13mm cut off of them in Cura's settings and 3mm "solid" bottoms. This works well with the spiralized lids but doesn't give very much to grip if using the original lids.I modified 10 of the mazes from the customizable openscad maze but you can paste in your own or generate a random one (see source object for link).<h3>Print Settings</h3>Printer:Monoprice Maker SelectRafts: <div>No</div>Supports:NoResolution: <div>0.25</div>Infill:N/ACategory: Puzzles

Customizable Spiralized OpenSCAD Maze

Containers

remi.rafael

<div><h1>Summary</h1><div>This thing is a customizable bookmark. I usually print it very thin (0.6 mm) and keep a few in my notebook to mark specific pages. The thin bookmark are not very sturdy but you can use multiple ones without damaging the pages. You can freely change the text and text size as well as the bookmark's dimensions. Here are the signification of every customizable parameter:Size=30; //lateral dimention of the of the bookmark Length=60; //lenght of the part of the bookmark inside the book Text_dimention=10; // height of the text zone Thikness=0.7; // thikness of the part Text_Size=5.5; // Size of the text Text="Ref. 2"; // texte to be includedPlease be reminded that letters with "island" features like "a, e, r, o, p, d, b, g" will include a hole after printing.I discovered this page after finishing this project: <a href="/thing:1039106" rel="nofollow">https://www.thingiverse.com/thing:1039106</a> You may want to look at it if you want more options to customize your bookmark.For detailed explanations on how to use a customizable part look here: <a href="https://www.instructables.com/Learn-How-to-Use-Customizable-3D-Models-With-OpenS/" rel="nofollow">https://www.instructables.com/Learn-How-to-Use-Customizable-3D-Models-With-OpenS/</a></div></div>

Customizable bookmark

Bookmarks

MEAF designs

Say bye to boring afternoons with this amazing maze game! This will not only challenge your solving capabilities but also your collaboration and coordination skills with other people.&nbsp;It consists of a game for two people, where the objective is to take the marble from the initial point to out of the board but you must do it by pulling the corners through a rope to tilt the board and take it through the entire route. <figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_4crfxnliq8st.gif"></figure>&nbsp;&nbsp;Once you achieve it, you can increase the difficulty by changing one of the ropes and pulling in a cross, or trying to do it in the shortest possible time.&nbsp;<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_tcqmrkplsgno.png"></figure>&nbsp;I have designed this for a 6mm ball bearing, and the max build volume of an ender 3 or similar. so you will be able to print it in almost any printer&nbsp;I´ve made 2 levels: <ul><li>level 0 = easy to achieve, with little travel. to familiarize yourself and learn </li><li>level 1 = with more travel and possible paths. ideal to compete and improve </li></ul>&nbsp;and I'm working on an even more difficult one, let me know if you'd like it. &nbsp;every level starst at the circular wall (there is only one in each), and you have to take the marble to the path until it leaves the board.if you achieve both levels you can use them in other ways, for example starting at each of the corners and taking the marble to the official start or official exit. doing so they practically become 3 versions each&nbsp;you will need:Printed parts1 - game board4 - poles1 - maze of any level you want&nbsp;Not printed parts4 - rope sections of 30cm each (you can use whatever rope you have on hand, from a shoestring to paracord. just make sure you don't use fishing line and pretty much anything can work)&nbsp;1- hot glue gun, 3D gloop, or any glue of your choice for pla or printed material&nbsp;to assembly you just need to glue the poles to the board, and then pass the rope through them to tie the maze at the other end. you can check the pdf for more datailed instructions. &nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for board and holders. 0.2 for mazeNozzle diameter: 0,4mm or 0,6mmInfill: 12-15%Perimeters: 2Support: noif you want a multi color maze just insert a filament change at: 1mm&nbsp;&nbsp;you can check all my other designs here<a target="_blank" href="https://www.printables.com/@dgoalva" rel="nofollow noopener">dgoalva | Printables.com</a>&nbsp;&nbsp;&nbsp;

Party Maze challenge

Games

TBone_427120

This lampshade is designed for the <a target="_blank" href="https://makerworld.com/sv/models/13717#profileId-13429" rel="nofollow noopener">Bambu Led Lamp 001</a> kit ←- Follow this link to get the model for the base that holds the electronics and that this globe shade locks into.&nbsp;This is a moon lithophane model for the LED Lamp kit base built using NASA SVS data.&nbsp;Before printing, it is highly recommended to test and calibrate the filaments. Test Prints are provided in a profile to test the trickier parts of the print, in particular the top of the moon. Printing the sliced off moon top will give an idea if the flow rates need to be calibrated or if the layer heights need refining.Both of these are eSun PLA, and both were printed using the same eSun PLA+ profile. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_e7cbdab0e3545.jpg"> The one on the left (&#34;creamy&#34;) needed different flow rate settings to avoid the gaps in the thin walls. Moral of the story: spend the extra 20 minutes to at least run the Auto Calibration for a new filament (and Manual isn&#39;t so bad to do either particularly if you print on the textured plate).&nbsp;The extra big brim is out of an abundance of caution. There is nothing worse than being ten minutes from the end of a 17 hour print and hearing *CRACK* followed by a spaghetti detected notification. If the test print indicates your filament needs a small center support for the top of the moon, “Normal/Snug” supports will work best. Use Manual supports (Auto will result in a ton of exterior supports for the base of the moon) and paint a small dot in the underside of the top of the Moon. The latest version of the model has been made a little thicker and is more forgiving for printing with most filaments. The part that interfaces with the lamp kit base can easily be made a different filament to match the LED holder material or just for variety. Just set the base filament for the “ModifyBaseSettings” modifier. Doing will require only one filament purge, no prime tower is necessary.<figure class="image image_resized" style="width:41.3%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_33ea3c815b5ef8.png"></figure>&nbsp;If using the modifier to make a material change at the base, make sure to pick two filaments that have good adhesion to each other.Because the print requires supports in the base and cleanly removing those supports is important for a snug fit to the lamp kit base, a test print is provided to make sure the filament and support settings will release cleanly. Normal snug supports provided the best results (tree supports required much more effort).&nbsp;<figure class="image image_resized" style="width:17.23%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_f00e2d2199c81.jpg"></figure>&nbsp;If you do use the center support, when removing don&#39;t pull at individual folds from the bottom. Use something to grab on multiple folds as far up as possible (a pair of kitchen tongs works well) and twist.<figure class="image image_resized" style="width:17.52%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_c2509972a68348.jpg"></figure>Twisting will put less stress on the top of the sphere and less risk of pulling away the moon surface. If you have wisps of filaments, resist the urge to use a heat gun because the variable thickness of the shell will contract non-uniformly under the heat. This is the result using a heat gun on a lithophane:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000031191/design/2023-10-06_a27a97fbc55ec.jpg">&nbsp;

Moon Globe for LED Lamp 001

Lithographs

Print and build your own Go-Kart from Mario Kart 8!&nbsp;This Go-Kart model kit has all the pieces to assemble a kart with spinning wheels and a compliant bending chair. The model kit is completely flat on the bottom for incredibly easy prints without supports!&nbsp;Enjoy racing!