JBaes2

TechJeeper

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray At layer #10 (0.88mm) swap to White for the rest.

Giant Oreo HueForge

Litho/Hueforge

InfinitiPrints3d

Full color Kaws BFF. Comes in right at 28" tall total&nbsp;Make sure to follow @infinitiprints3d on instagram for more amazing profiles!

28" Kaws BFF

Decor Art

disinterest

UPDATE 01-23: Added gantry stabilizers that go underneath the lead screws per request from <a target="_blank" href="https://makerworld.com/en/u/3167095382" rel="nofollow noopener">@loafer_coyote0b</a>. Thanks again!I printed without supports since its a small gap to bridge, but the hard rubber pad on the underside of the gantry should slot into it, purge bins that sit up close to the printer shouldn't have any issues. It really does help with support since the bed is set down on the gantry then attached with screws from beneath, a major oversight on the original design on my part. &nbsp;I do not use bambu studio so I have not uploaded a print profile, only the raw files and a presorted plate. If someone would be so kind as to take on that task it would be very much appreciated.&nbsp;Print 2x of A1ScrewStablizerBody in a material of your choice.Print 2x of A1ScrewStablizerPad in TPU.&nbsp;ORIGINAL:&nbsp;I did not like any of the feet currently floating around and the ones I did required extra stuff like squish balls. So I taught myself what I needed for fusion 360 and stayed up too late a couple nights to make this.&nbsp;The tpu top pad piece slots perfectly into the screw holes on the underside corners of the machine, tpu feet sit in the bottom, you can print the body out of whatever, I chose abs as I plan on making a fan shroud to actively cool the internals so it can be enclosed, but I test printed multiple iterations in pla and petg with both holding the weight fine.&nbsp;Note: The walls and really any plastic part of the feet should not touch the printer, I deliberately left a gap so there isnt any vibration noises and only the tpu pad makes contact.&nbsp;&nbsp;&nbsp;Print Requirements&nbsp;NEED SUPPORTS on the Front/Rear pieces (I did normal auto, snug, build plate only) rotate the Foot with filet up or down depending on which side you want to contact the table surface.&nbsp;4 x Foot2 x Front2 x Rear (IMPORTANT) Mirror ONE to fit other side, it will work fine otherwise but for aesthetics flip it.2 x PadFront2 x PadRear Alternately use the presorted plates which are separated by material.No specific slicer settings other than supports so use what you're comfortable with.

A1 Riser Anti Vibration / Noise Reduction Feet

A1 Prints

dalet11

This is a shorter version of the best Laptop Stand ever!<a target="_blank" href="https://makerworld.com/en/models/67488#profileId-71449" rel="nofollow noopener">Original Remix here.</a>&nbsp;<figure class="image image_resized" style="width:69.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/282902/2023-12-10_f9c5c73e3546c8.png"></figure>&nbsp;Compared to my original remix, this version is shorter by 28mm in height to be aligned with the tray height.It will also be more comfortable when needing to type the keyboard when the laptop is on the stand.&nbsp;Note that the original tray will fit this version, but it will be a bit tight - the tray height in this version was also reduced by 1.5mm for better fit - so if you already printed my original remix, check first if the original tray is ok for you before printing new one.&nbsp;—&nbsp;Based on TVL 3D design, I've improved it a bit to support also 15.6 inches laptops (originally fits only 13.3/14), and added a “stopper” to the tray so it won't come out when pulling.<h4>Features:</h4><ul><li>Tray to hold all your desk stuff.</li><li>support 14/15.6 inches laptops (tested with Asus TUF A15, Lenovo E14/15).</li><li>Cable holder that can fit anywhere at the sides.</li></ul>&nbsp;Dimensions : 360mm X 251mm X 104mm&nbsp;There are 3 plates to print, I recommend printing the tray and cable holder in different colors - it's beautiful!

Litho/Hueforge

Decor Art

A1 Prints

Organization

Vases