fourtwenty

Black Glovz

Wall Hanging Cat Decoration Simons cat

Creative Electronics

I remixed this radius gauge from @mibla: <a target="_blank" href="https://makerworld.com/en/models/33208#profileId-30030" rel="nofollow noopener">https://makerworld.com/en/models/33208#profileId-30030</a>&nbsp;<figure class="image image_resized image-style-side" style="width:48.19%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149224/design/2024-01-20_c727e0ff030d8.jpg"><figcaption>Bolts that fit in the holder</figcaption></figure>The top cover is different from the original design, now every M5x30mm bolt will fit in the holder (DIN912, DIN7991, DIN7380-1,BN1435,..)&nbsp;The hole has an inner diameter of Ø9,5 mm&nbsp;I also made a <a target="_blank" href="https://youtube.com/shorts/Ne_Ni5uk-3Q?si=t7NyRMPvxpxh9JS6" rel="nofollow noopener">youtube short</a> about this project&nbsp;

Radius/Fillet Gauge 1-20mm

Tools

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_5f1uaq5tqz04.png"></figure><h4>Dimensions (LxWxH)</h4>170 x 83,88 x 53,43 mm (100% scale)<h4>Basic information</h4>Have you ever wanted to hold a Great white shark, or keep it as your pet? Here's a good alternative.This shark is divided into 7 articulated segments with 2 movable fins, which grant the model with lifelike feel, and movement. It's quick and easy to print, and doesn't require any supports.<h4>Files information</h4>I've included one file in the .stl format.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_z81w1zxs9hqc.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>10%<h4>Support</h4>None. The model was designed not to require any support material.<h4>Scaling</h4>Possible, downscaling is easier, than ever before! If you have a well calibrated machine, you can downscale the model without any need for concerns. If you won't go way too crazy with downscaling, you shouldn't run into any issues.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using an adhesive spray, or an other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_jcskr84f88bu.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_csvj2i5i5nbc.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584776/2024-01-09_9vzf67hm3kch.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Great White shark

Toys

franceschellifederico

Description:This 3D-printable cable organizer is designed to keep your workspace tidy and your cables neatly organized. With its sleek and functional design, it accommodates various cable sizes, ensuring a clutter-free environment. Whether it's for your desk, entertainment center, or workspace, this organizer offers versatility and practicality. Its user-friendly design allows for easy printing and assembly, making it an ideal solution for managing multiple cables effortlessly. Embrace a clutter-free setup with this customizable cable organizer!&nbsp;Features:<ul><li>Versatile design fits various cable sizes</li><li>Sleek and functional for any workspace</li><li>Easy to print</li></ul><a target="_blank" href="https://makerworld.com/en/models/134271#profileId-145744" rel="nofollow noopener">Check out my new model: HERE </a> <a target="_blank" href="https://makerworld.com/en/models/134271#profileId-145744" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/388105/2024-01-11_6fed0b403a995.png"></a>

Cable Organizer v2

handy

Jaxel

NOTE: I was working on updating this model to make it easier to transfer between spools… but then <a target="_blank" href="https://makerworld.com/en/u/11128021" rel="nofollow noopener">KYZ Designs</a> made this absolutely <a target="_blank" href="https://makerworld.com/en/models/179426" rel="nofollow noopener">excellent model</a>, that I ended up using instead. So I recommend checking out that model!&nbsp;This is a desiccant gel holder specifically designed to fit snuggly and securely into the BambuLab filament spool. Keep note of the wall, shell and infill settings required to print this model. The hole in the middle is there to increase surface area of the desiccant, not to be used to bear a load.&nbsp;The holder is flanged on both ends, which snap together very tightly. The ends are not “screwed” on, but instead “snap” together. Doing it this way makes sure they can never accidentally open up and spill gel beads all over the place. In order to separate the two ends, a special tool is included which will help in opening the holder. Simply put the tool on top of a hard surface, slide the bottom of the gel holder into the tool and press down on the spool. The top will pop off easily. The caps are designed so the tool can only be inserted one way, so the gel holder will always face up when used properly.&nbsp;WARNING: the teeth on the cups flex inwards when capped, as such, you should not print this in material that is too rigid to bend without snapping, such as PLA. In addition, if you use a higher temperature material such as ABS or PETG, you will be able to drop your spool right into a filament dryer without having to worry about the heat warping the cups.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

BambuLab Filament Desiccant Spool Holder

A1 Accessories

Encrust3d

1/26/2026 update: u/Flyrockets informed me of an error that is occurring on Firmware 01.01.50.24 (beta tester firmware) that the nozzle will hit the build plate aligner after the third layer and cause an error, causing the print to stop. I have updated this design to lower the aligner to be 0.5mm above the Textured PEI build plate vs the 3mm it was previously. This shouldn't cause any errors as the third layer should be over 0.5mm in most cases, but I do not have the 01.01.50.24 firmware to confirm. Please let me know if you experience any errors while using this updated design and I will update it again. To easily remove your build plate aligner and update to the new one, remove the old build plate aligner starting with the lober side and simply push it down and off the heat bed.&nbsp;If you are enrolled in the beta firmware program with Bambu, please check your printer firmware before printing. If you are enrolled in the beta firmware program with Bambu, you will need the updated design. If you are not part of the beta firmware program, the original design will work great for you if your firmware is 01.01.01.00 (stock firmware)&nbsp;This is a guide for aligning the build plate on the Bambu Lab A1 printer I designed in Fusion 360. I have been having problems getting my build plate perfectly straight on my new A1 printer so I designed this to clip on to the right rear corner of the A1 heatbed to help align the build plate. This build plate aligner prints in less than 20 minutes and uses less than five grams of filament. This design has been tested to ensure it does not interfere with bed leveling or nozzle cleaning. This design needs to be printed in the orientation I have uploaded it in for proper fit.&nbsp;You can not mirror this design and use it on the left rear side of the bed. The nozzle will hit it when changing filaments or cleaning the nozzle and cause the print to stop.&nbsp;Printing in PLA works, but PETG is the better material to use for this aligner. If you find this model to be a little loose, it is to ensure it can be removed from your bed if you do not want it on anymore. I had numerous versions of this that fit perfectly but had to be cut off to be removed. I do not want you to have to cut this off of your printer if you want it removed.&nbsp;If you are interested in a A1 heatbed cable support clip, you can download it here: <a target="_blank" href="https://makerworld.com/en/models/118957#profileId-127976" rel="nofollow noopener">https://makerworld.com/en/models/118957#profileId-127976</a>&nbsp;

A1 Build Plate Aligner

A1 Printer stuff

DaTryhard22

Here is a highly detailed, multicolor-ready, 1/10 scale model of a 5lb propane tank. Due to the number of different colors on each layer, the multicolor prints will take a very long time and generate a substantial amount of waste material. To mitigate the waste, I recommend printing more than one and giving the extras to friends. Supports are needed for this model but can be quite difficult to remove. Be especially careful with the support under the knob on top of the model as this area is quite fragile. Luckily, it is easy to glue this back together if it breaks. The fragility of this model is another reason to print multiple of them at once.

fun

Tools

Toys

handy

A1 Accessories

A1 Printer stuff

RC 1/10th scale