jon.kamp

Espresso Funnel for PortafilterPrevents ground espresso to make a giant mess in the kitchen.A quick rotation helps with pre-distribution.

Espresso / Portafilter Funnel

Coffee Tools

Meister Edel

Heyho&nbsp;Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But this one could not be worn as a necklace :D And the versions at Printables that could be worn as a necklace were unfortunately very fragile. Also, all the ocarinas I tested needed some touching up to get the tone to come out reasonably clear :/So I designed a lot back and forth and after many prototypes (yes I exaggerated a bit :) ) I constructed this easy to reproduce ocarina. Conveniently, I can easily distribute all the prototypes in our kindergarten :)It comes in 2 versions.&nbsp;4 holes: Easier for smaller children. 6 holes: Multiple notes to play.<figure class="image image_resized" style="width:63.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_um7aojusafcb.png"></figure>The ring on the rear side serves as an aid to prevent fingers from getting too close to the air outlet so that the sound is not affected.Skaling:You can increase or decrease the size of the ocarina! This is easily done in the slicer. But I have also prepared the Versions skaled to 80% and 120% for you.Tonally I prefer the 120% Ocarina. But for the kids the normal one does the job just fine! Printing instructions: I printed it with 0.15 mm per layer in PLA. But the material probably doesn't matter much and the smoother the surface the better! From 100%+ you can also print the models well with the 0.6 mm nozzle.Avoid a seam around the air outlet and check for good bridgin in that area.<figure class="image image_resized" style="width:58.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_quenyer9byg7.png"></figure>&nbsp;<figure class="image image-style-align-center image_resized" style="width:78.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_k37qry7wtzjs.png"></figure>Stringing: If you have problems with stringing you can use a hairdryer in combination with a zip tie.&nbsp;<figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_v6tm9pjsocnw.png"></figure>Necklace: You can use any cord/ rope through the eyes of the pig to hang it around your neck :P<figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_nepbcsodmdz9.png"></figure>&nbsp;And yah the piggies look so somewhat sad :P&nbsp;&nbsp;Have fun! If you like my work feel free to share it!