JohnLui

Hexide

This frame is still a work in progress but is usable in its current state.&nbsp;Suitable for stack 20x20mm stacks.&nbsp;Current drone part list:<ul><li>Flight stack: Hobbywing XRotor Micro 45A G2 4in1 ESC&FC (BL32/F7)</li><li>Mamba 1103 8500kv motors</li><li>FlySky FS-RX2A Pro 2.4Ghz Receiver</li><li>HQPROP T51MMX6 51mm 6-Blade PC propellers</li></ul>

BetaFPV Pavo20 whoop replica frame

无人机

ogldr

Simple self watering plat pot with floating water level indicator.Inner pot diameter: 8 cm.The reservoir is designed to hold approximately 100ml of water. It is possible, though not recommended, to fill a bit more.When using an organic/soil-based medium, a bottom layer of inert medium (perlite, pon, seramis etc.) is recommended to avoid waterlogged soil where the reservoir is in contact.<h2>Printing Directions</h2>These are the printing parameters I have used to achieve the product pictured above. YMMV.All parts were printed as oriented in the STL files. No supports are needed (overhang for the pot and indicator is 45°).The resulting print weighs a total of ~80g.Please feel free to upload your tweaked printing files for other printers and filaments.&nbsp;ReservoirLayer height: 0.2mmBottom layers: 4Top layers: 4Wall count: 2Infill: 20%Extrusion multiplier: 1.05&nbsp;PotLayer height: 0.2mmBottom layers: 4Top layers: 4Wall count: 2Infill: 100%Extrusion multiplier: 1.05&nbsp;&nbsp;IndicatorAs PLA has a higher density than water, the water level indicator must be hollow in order to float. I recommend printing this part in vase mode (spiralised outer contour).Layer height: 0.2mmBottom layers: 2Extrusion multiplier: 1.05

Self Watering Plant Pot

花盘

幼安

<h3>这是一个用于拓竹A1mini的料盘转角支架（如图），可以承受至少重约1kg的料盘（因为我只有1ke的料盘），可以使用PLA耗材打印，在可预计的使用重量内不影响使用（PLA百分百填充，所以影响打印时间），支架链接处连接机器端契合较好，料盘端插不进去可以微加热底面试试，希望对你有帮助</h3><h3>This is a tray corner bracket for Tuozhu A1mini (pictured), which can bear a tray weighing at least about 1kg (because I only have a tray of 1ke), and can be printed with PLA filaments, and it will not affect the use within the predictable use weight (PLA is 100% filled, so it affects the printing time),The bracket link is connected to the machine end well, and the tray end can not be inserted to try to heat the bottom surface slightly. I hope it will help you</h3><h3><img src="https://makerworld.bblmw.com/makerworld/draft/558187/2024-02-20_e5ad21deee639.jpg"></h3>

无人机

花盘

3D打印机