johnknaack

topxnbo

loved lloydliu's drybox design. printed perfect, but hey, everything is better with a Bambu logo, right?&nbsp;just a simple addition of the Bambu logo to the three variation of the lids, and flattening out the center area.

Bambu Logo Lids for AMS Drybox

Niko Caignie

<h2>Summary</h2>Since I bought a filament dryer (<a target="_blank" href="https://www.amazon.com/Sovol-Filament-Dehydrator-Printing-Compatible/dp/B09686Z5R3/" rel="nofollow noopener">Sovol 3D</a>) I had some issues with tension on the filament input on my Anker M5. This was related to the angle filament entering the machine. (Sovol 3D) So I resolved that by using the original filament holder, which already worked fine but since I added this Filament guidance spool it goes even smoother.When doing higher pints it might happen that the filament falls of the spool, to resolve that I added a Support over the spool. (Thanks to <a href="/hishak/designs" rel="nofollow">HiShak</a> for pointing this out!)It looks like the support has a nice opening to guide the filament trough, I would not recommend this, this will add more friction to the process. I just added some empty space to save filament.Filament Spool: Made for Anker M5 but can be used on all filament holders.Dimensions:<ul><li>Inner circle: 9mm</li><li>Diameter: 56mm</li><li>Width: 38 mm</li></ul>Filament Support: Specially made for the Ankermake filament holder extension bar.For the Ankermake M5 users, i added the pre-sliced GCODE files for printing with PETG<h2>Print Settings </h2>Supports: Yes&nbsp;Resolution: 0,2 Infill: Spool 5% - Support 10% (lines)&nbsp; Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=BASF+PETG+%2F+PLA" rel="nofollow noopener">BASF PETG / PLA </a> Orange Notes: &nbsp;&nbsp;<h2>Post-Printing</h2>Antislip For the Filament Support, I added a 1mm adhesive vinyl on the inside so it stays in position but it is still possible to slide the support back and forward.

Filament Guidance Spool

Ankermake

Adam L

This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing.One of the things the Bambu X1/X1C/P1P printers cannot do for you is calibrate fan speeds for different filaments auto-magically. Temperature and cooling, along with flow and pressure advance is important to do for good printing performance, particularly for overhangs & bridging performance, as well as stringing.This model tests curved, straight, and thin overhangs in different orientations and by repeatedly printing a model at different heights. I have pre-sliced Fan and Temperature 3MF files for you, but you can “Scan” any printing variable you wish at 10 mm intervals. This model tries the most challenging types of curved overhangs, up to 90%, as well as bridges (100% overhang). It also prints several tiny features to make sure you don't accidentally over-optimize for one area of performance at the cost of another. <h3>Which file should I use?</h3>Bambu/SoftFever Users : (other slicers see below)Note: These files assume you are using an X1C (machine I tested on). If you are using a X1 or P1P or other machine, you will need to copy/paste the custom before-layer-change code into a copy of your machine's profile and save a copy and then slice. See the temperature instructions below for where to find this.<ul><li>Temperature : 5xTempScan.3MF (This file does 5 different temps)</li><li>Fan Speed: 10xFanScan.3MF (This file scans 10 different speeds)</li></ul>If you use another slicer or want different sizes, STEP & STL files are included for 10x,5x,1x and separate base and repeating unit.<h3>Important Instructions:</h3>It is very important to make sure you're scanning the variable you think you are by checking in the slicer preview (temperature or fan speed view). Additionally, my files have a preset for Overture PETG by default setup. Make sure to change it to your filament of choice!<ul><li>For fan-scanning it is very important to change your filament cooling settings temporarily to not conflict with the machine “before-layer-change” overrides that have been setup for you in the 3MF files! Simply change your filament settings to specify no cooling for the first 1000 layers to prevent issues:<img src="https://media.printables.com/media/prints/366923/rich_content/7c30eb2f-215d-40f5-a9b8-f33c1422ce7d/image.png#%7B%22uuid%22%3A%22a0adba3d-26a2-4ef2-9c0c-58fe0fbb40e9%22%2C%22w%22%3A483%2C%22h%22%3A192%7D"></li></ul>&nbsp;<ul><li>For temperature scanning you will need to go into the machine GCODE settings and set the temperatures you want to scan. Click here to open the dialog, and then find the Before Layer Change G-Code dialog and modify the temperatures you want to scan, along with your starting temperature (see other-slicer instructions):</li></ul><img src="https://media.printables.com/media/prints/366923/rich_content/96879c10-0de8-4dfb-b9a0-68be29a72d75/image.png#%7B%22uuid%22%3A%22bda48a94-9eb2-45df-84a7-5aaaa48435ec%22%2C%22w%22%3A536%2C%22h%22%3A124%7D">Then change the yellow highlighted values:<img src="https://media.printables.com/media/prints/366923/rich_content/d9a1de9c-6617-4bd0-8b23-46a41434b880/image.png#%7B%22uuid%22%3A%224ab758ee-a8fc-45a6-a2b2-33d527c7fb2d%22%2C%22w%22%3A744%2C%22h%22%3A288%7D">&nbsp;PrusaSlicer / SuperSlicer / Other Users:<ul><li>I've provided the STL & STEP files for you folks. You'll need to configure your slicer to scan the variable you want by adding the appropriate “Before Layer Change G-Code” in your slicer. Here's copy-paste templates for 5x Temperature and 10x Fan towers: </li></ul>Example Temperature code:<code>{if layer_z<2.0}M104 S285 ; Temp Tower starting temp</code> <code>{elsif layer_z<=12.0} M104 S285 ; Temp Tower Temp #1</code> <code>{elsif layer_z<=22.0} M104 S280 ; Temp Tower Temp #2</code> <code>{elsif layer_z<=32.0} M104 S275 ; Temp Tower Temp #3</code> <code>{elsif layer_z<=42.0} M104 S270 ; Temp Tower Temp #4</code> <code>{elsif layer_z<=52.0} M104 S265 ; Temp Tower Temp #5</code> <code>{endif}</code>Example Fan Code:<code>{if layer_z<2.0}M106 S0 ; FanTest floor 1 (no fan)</code> <code>{elsif layer_z<=12.0} M106 S26 ; FanTest floor 2 (10% fan)</code> <code>{elsif layer_z<=22.0} M106 S51 ; FanTest floor 3 (20% fan)</code> <code>{elsif layer_z<=32.0} M106 S77 ; FanTest floor 4 (30% fan)</code> <code>{elsif layer_z<=42.0} M106 S102 ; FanTest floor 5 (40% fan)</code> <code>{elsif layer_z<=52.0} M106 S128 ; FanTest floor 6 (50% fan)</code> <code>{elsif layer_z<=62.0} M106 S153 ; FanTest floor 7 (60% fan)</code> <code>{elsif layer_z<=72.0} M106 S179 ; FanTest floor 8 (70% fan)</code> <code>{elsif layer_z<=82.0} M106 S204 ; FanTest floor 9 (80% fan)</code> <code>{elsif layer_z<=92.0} M106 S230 ; FanTest floor 10 (90% fan)</code> <code>{elsif layer_z<=102.0} M106 S255 ; FanTest floor 11 (100% fan)</code> <code>{endif}</code>&nbsp;Other Printing Details<ul><li>Filament Print Temperature: Any filament will work for temperature scanning. I recommend using default fan settings for that filament type when scanning temperatures to get a good guess at which temperature is ideal.</li><li>Filament Fan Speeds: This test variant is particularly useful on filaments that need to balance strength or warping with detail and quality. Typical examples include PETG, Nylon, ABS, etc. </li><li>Layer height: Typically 0.20 or 0.16 mm. The 3MF files provided are the faster 0.2 mm prints, but are easily changed by adjusting the layer height in the slicer. 0.2 mm is also more challenging and may help accentuate temp/cooling differences. However, you should use whatever layer height you use the most frequently.</li><li>Nozzle size: This test assumes you are using a standard 0.4 mm nozzle, but in theory can work with any nozzle with some adjustments.</li></ul>Why did I make it this way ?I adapted this model from the thingiverse model <a href="https://www.thingiverse.com/thing:2003594/files" rel="nofollow">here </a>, but made several modifications to really push the printer hard to accentuate differences between different settings. These included adding several new features and adjusting the overhangs to be longer and more aggressive in various different ways.Which printers does this work with ?Any printer! However, the 3MF files contain BambuSlicer settings to make people's lives easier who use that slicer. This was sliced with<a href="https://github.com/SoftFever/BambuStudio-SoftFever" rel="nofollow"> SoftFever's fork </a>(v1.4.2) of the official BambuSlicer, but it is also drop-in compatible with the official slicer. Works fine also with PrusaSlicer, but you'll need to do your own “before layer change” setups for fan/temperature.

Scan Tower : Calibrate a Filament's Fan & Temperature Settings (Bambu X1/X1C/P1P or any printer)

Calibrate 

GekoPrime

I tried another spool winder but found it finicky and delicate.I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable windersWhy pick this model:<ul><li>Prints on a single build plate</li><li>Doesn't require heat set inserts or exotic hardware</li><li>Fusion and STEP files are available, remixes welcomed</li><li>Generous clearances, simple mechanisms</li><li>Designed to be a tool, not a project</li></ul>Print time:<ul><li>~500 grams of filament</li><li>~22 hours on Bambu Lab X1</li><li>~5 minute assembly</li><li>~2 minute spool transfer</li></ul>Hardware requirements:<ul><li><a target="_blank" href="https://www.amazon.com/s?k=608+bearings" rel="nofollow noopener">14x 608 skate bearings</a></li><li>A scrap of PTFE tubing</li><li>An electric screwdriver or drill with <a target="_blank" href="https://www.homedepot.com/p/DEWALT-MAXFIT-3-5-in-2-Philips-Bit-DWA3PH2MF/309474882" rel="nofollow noopener">a bit cut from ¼ inch hex stock</a> (most <a target="_blank" href="https://www.amazon.com/ITP1201-SCRWDRVNG-2IN-1-IMPAC/dp/B01LZZ7AOS/" rel="nofollow noopener">cheap quick change Philips bits</a> in the US fit this requirement)</li></ul>Print settings:<ul><li>Any. I used "0.16mm Optimal" in BambuSlicer with 5% adaptive cubic infill </li><li>Use 100% concentric infill for spindle_male_driven</li><li>Try the STLs if you have a problem with the 3mf files. I’ve added (xN) to each file name so you know how many to print</li></ul>Materials:<ul><li>Any. I used Polyterra and iiidmax PLA+</li><li>Use TPU for tpu_consumable_wiper_blade. I used Priline 98a. The wiper blades aren’t 100% required but they help keep the windings nice and tight</li></ul>Assembly and usage:<ul><li><a target="_blank" href="https://youtu.be/DxgkYDrRK-U" rel="nofollow noopener">Demo video</a></li><li><a target="_blank" href="https://youtu.be/-Hy69YwRLBw" rel="nofollow noopener">Assembly video</a></li><li>The side that says “Pastamatic" needs to face outwards, away from the spool</li><li>The filament needs to come in under the target spool, like this: O____O<ul><li>[not like this: O‾”‾”‾”O]</li></ul></li><li>The drill/driver needs to run clockwise, as though you're screwing something in</li><li>Accelerate slowly until the winder gets started</li></ul>Change log<ul><li>2023-05-28<ul><li>Initial release</li></ul></li><li>2023-05-29<ul><li>Fix a minor export glitch in "leadscrew_tooth"</li><li>Increase the number of “pin_short” instances in the 3mf from 6x to 8x</li></ul></li><li>2023-05-30<ul><li>Add a second prearranged 3mf with two plates to avoid overlap warnings</li><li>Disable autogenerated brims for the single plate 3mf </li><li>Add STLs for people who have trouble with the 3mf</li></ul></li><li>2023-06-03<ul><li>Add a ring to passive_target_cradle to prevent the far end of the target spool lifting if a user lets the the drill hang loose</li><li>Add a pin to driven_target_cradle prevent the leadscrew popping out</li><li>Fix a minor clearance issue where a dovetail didn't fit quite right</li></ul></li><li>2023-09-30<ul><li>Reduce chamfer on the crossbars to prevent them falling over when bed adhesion is poor</li><li>Add some holes to the crossbars to make them easier to screw down</li><li>Add some popular acessories to the all-in-one .3mf</li><li>Add a printable spool to the all-in-one .3mf</li></ul></li></ul>How to contribute:<ul><li>Post your make, it keeps me motivated to improve the model when I see people using it!</li><li>Post your feedback, idea or remix in the comments!</li><li>There are a few improvements and accessories in development as remixes, check those out if you‘re up for the alpha/beta tester experience<ul><li><a target="_blank" href="https://www.printables.com/model/498743-pastamatic-37-mm-motor-mount" rel="nofollow noopener">Adapter for 37mm gear motor</a></li><li><a target="_blank" href="https://www.printables.com/model/556405-pastamatic-filament-spool-winder-modifications-bra" rel="nofollow noopener">Source spool holder for 5 KG spools</a></li></ul></li></ul>Credits:<ul><li><a target="_blank" href="https://www.printables.com/@MiklosKiszely_486882" rel="nofollow noopener">@MiklosKiszely_486882</a> for the original idea</li><li><a target="_blank" href="https://www.printables.com/@PsychoShaft_33891" rel="nofollow noopener">@Psycho Shaft</a> for the drag/tensioner concept</li><li><a target="_blank" href="https://www.youtube.com/@thang010146" rel="nofollow noopener">thang010146</a> for YouTube videos of mechanical mechanisms, particularly the self reversing leadscrew for a level cable winder</li></ul>&nbsp;

Pastamatic  Filament Spool Winder for Bambu X1C/P1P AMS (level winder with self reversing leadscrew)

Spools and Spools Tools

macdylan

This model consists of an inner and outer bins and has a convenient handle for easy carrying. You can apply a label to it.Recommend to use 0.8mm line width and print in vase mode.The provided 3MF file includes the Copy-mode and other printing parameters for the Snapmaker J1 (IDEX printer). Additionally, a Fusion360 file is provided for you to modify the dimensions as needed.

Gridfinity bin with label (parametric)

Gridfinity

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo top lid module. Maximum accessibility for the tools you need most often.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/568390/2023-09-08_b86h9lauvcyx.jpg"></figure>BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.&nbsp;&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>Update:(13/09/23)<ul><li>Assembly optimizations</li></ul>(31/10/23)<ul><li>print profile optimizations (side panels are printed upside down to get a better top surface)</li></ul>(15/01/24)<ul><li>lid reinforcement</li></ul>(18/01/24)<ul><li>tighter fit of the lid</li><li>rounded corners to avoid warping on the edges</li></ul>&nbsp;Printing:Layer height: 0.2Supports: YesBrim: NoMaterial: allRemove the purgeline afte the start of the lid part print and do not use filament calibration!&nbsp;Assembly:Follow the instructions in the picture.<ul><li>printed parts</li><li>14 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!

[BaBo] top lid module

Bambu Lab

neil3dprints

Bambu Mate P1S ( AMS Version )&nbsp;Update 23/09/2023&nbsp;I have removed the original 3MF file and split the parts against four profile 3MF's. As this model requires more than four colours, as soon as the fifth colour is reached for printing, this has caused some people issues. Please print the four new profile 3MF's and refer to the images for assembly. Any problems please leave a comment and apologies for any inconvenience.&nbsp;Do you love your 3d printer so much, that you'd wish you could print a miniature caricature of it? Well…. you welcome. :-)Now, I should point out a number of the parts do take advantage of the AMS system. If you do not have a AMS, then, like… why not?And… YOU WILL NOT BE ABLE TO PRINT THIS!!!&nbsp;I printed all the parts at 0.16mm layer height.A number of the parts will require gluing together. Please refer to the images to see what order to attach the parts together.&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through MakerWorld and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>&nbsp;Happy printing everyone,

Bambu Mate P1S ( AMS Version )

CrazyCoolPrints3D

Model This is an P1S Desktop Organizer. It was made to organize anything you want. A structured insert is coming soon. This doesn’t need an AMS! It can be printed with layer changes for multi-color. A P1P version is on the way, there is also an X1C model! This model can also be sized up. Patreon (For Commercial Licenses To Sell And More Models): <a target="_blank" href="https://www.patreon.com/user?u=80724611" rel="nofollow noopener">https://www.patreon.com/user?u=80724611</a> &nbsp;Step By Step Process:Print the parts (made to work with or without the AMS). Slide the parts in the order shown in the assembly file (glue shouldn’t be needed). Slide the insert in, multiple versions will be available but currently there is only an empty one. Different Versions:P1P version coming soon.X1C version: <a target="_blank" href="https://makerworld.com/en/models/14659?profileId=14502" rel="nofollow noopener">https://makerworld.com/en/models/14659?profileId=14502</a>&nbsp;Update Log:(9/16/23): Released&nbsp;(Please report any issues to my discord: coaster fan#4551)

AMS

Ankermake

Calibrate

Spools and Spools Tools

Gridfinity

Bambu Lab

Fun

Storage and Organize