Johndus

Zack

marucci60

This is my first attempt at CAD, I wanted to use Bambulabs's cardboard spool ring as a templet so I can re-spool other brand filaments onto the empty spools that came with my AMS units. When I used ASA I had to poke the fiament starter hole with a 1.5mm allen wrench.

Bambu spool filament adapter

Spool Winder

sparq-e

For those of us with phones that don't support wireless charging, we rely on USB-C cables. Tesla's phone tray does not really accommodate plugged in phones so this model creates the needed space to be able to use the space while charging.&nbsp;Simply print and press-fit into the bottom of the tray area - it should fit snuggly. I drive like a maniac and have not had my phone fly out of the cradle (yet).&nbsp;I recommend printing in ASA, ABS, PETG or any other filament that could withstand potential higher temps.&nbsp;

Tesla Y Phone Charger Spacer (Tested on 2023 Model)

Tesla

helloxxsong

3D打印小夜灯 TB商品名：砼心原创斐波那契夜灯水泥台灯摆件黄金分割设计师礼物床头氛围灯 建模软件：Fusion360 打印材料：拓竹PLA Matte 哑光岩石灰 LED灯：拓竹LED灯创意模型组件<figure class="media"><oembed url="https://www.bilibili.com/video/BV1QH4y1V7SR/"></oembed></figure>share_source=copy_web&amp;vd_source=c5b3b79798e17bb534bc06a13dd00abe 【如何绘制黄金分割矩形？螺旋线？斐波那契数列？】https://zhuanlan.zhihu.com/p/66275264?utm_id=0

Night Lamp

Jonas

This is my filament sample set.You can adjust the text by just opening it in bambu studio and go to the object library. There you can open the Filament Sample Object and right-click on the text to change it.The logos fit into each other so you can check colour-combinations before you start printing a big multicolor object, to see if you like the combination.I also ulpoaded my swatch where you can put up to 3 samples in one row.

Filament Sample and Display for Colour Combination

Samples

Cookiedeluxe

<h2>Drybox for the safe storage of filament</h2><h3>No tools or fasteners required for assembly</h3>Turn your Sterilite 20 Qt box into a filament storage box with room for up to 5 spools! Just assemble everything as shown in the pictures and enjoy an orderly, flexible and stackable storage system. Comes with an optional holder for a hygrometer so you'll always know if you need to recharge the silica or not. Silica storage can be removed from the box without the need for disassembly.&nbsp;All you need (besides the printable parts and the box itself) is any ½ inch plastic or pvc pipe as can be found in any home hardware store. Cut two pieces to a length of 330 mm (13 inches) each and you're all set.&nbsp;All printable parts are designed so they can be printed by the Bambu Lab A1 mini, the Prusa Mini or any other printer with a print plate of at least 180 x 180 mm. Prints without the need for supports, except for the two end pieces. If you print from my print profile these supports are minimal and super easy to remove.&nbsp;If your hygrometer requires slanted slots or you prefer an open back instead of an enclosed one, check out the print profile named “Hygrometer mounts (optional)”. This print profile contains four different options for your hygrometer. The main print profile named “All printable parts” contains only the hygrometer mount with straight slots and an enclosed back.&nbsp;&nbsp;Bill of materials:&nbsp;<ul><li>Sterilite 20 Qt box with gasket. Approximately $9 for one or $50 for 6. Can be found at <a target="_blank" href="https://www.amazon.com/Sterilite-19324306-Gasket-Aquarium-Latches/dp/B00H1PS2TS/ref=sr_1_1" rel="nofollow noopener">Amazon</a>, <a target="_blank" href="https://www.walmart.com/ip/Sterilite-20-Qt-Clear-Gasket-Storage-Box-Blue-Latches-with-Clear-Lid/39916455" rel="nofollow noopener">Walmart</a>, <a target="_blank" href="https://www.target.com/p/sterilite-20-quart-stackable-clear-plastic-storage-tote-container-with-clear-gasket-latching-lid-for-home-and-office-organization-clear/-/A-86866695?preselect=76114127#lnk=sametab" rel="nofollow noopener">Target</a>, <a target="_blank" href="https://www.homedepot.com/p/Sterilite-20-Qt-Gasket-Box-with-Clear-Base-and-Lid-6-Pack-6-x-19324306/312922371" rel="nofollow noopener">Home Depot</a> or any other department store. </li><li>PVC pipe with a diameter of ½ inch. Around $4 to $5 for 10 feet. Can be found at any hardware store like <a target="_blank" href="https://www.lowes.com/pd/Charlotte-Pipe-1-2-in-dia-x-2-ft-L-600-PSI-PVC-Pipe/3341538" rel="nofollow noopener">Lowes</a>, <a target="_blank" href="https://www.homedepot.com/p/JM-EAGLE-1-2-in-x-10-ft-600-PSI-White-Schedule-40-PVC-Pressure-Plain-End-Pipe-530048/100113200" rel="nofollow noopener">Home Depot</a>, <a target="_blank" href="https://www.acehardware.com/departments/plumbing/pipe/plastic-pipe/44875" rel="nofollow noopener">ACE Hardware</a> or <a target="_blank" href="https://www.amazon.com/Pipe-Sch40-White-Custom-Length/dp/B09GL3XNWG/ref=sr_1_4_mod_primary_new?th=1" rel="nofollow noopener">Amazon</a>. </li><li>Silica beads. Available online everywhere. My personal favorite are the <a target="_blank" href="https://dryndry.com/collections/silica-gel-beads?filter.p.tag=Orange+Indicating+Beads" rel="nofollow noopener">orange indicating, rechargeable beads from Dry&Dry</a>, but any other brand works as well. </li><li>Hygrometer (optional). Any round hygrometer with the standard measurements of 44 x 15 mm works. Here's one example from <a target="_blank" href="https://www.amazon.com/Hygrometer-Thermometer-Humidifiers-Dehumidifiers-Greenhouse/dp/B07BLY177S/ref=sr_1_9?th=1" rel="nofollow noopener">Amazon</a>, but they can be found anywhere online.</li></ul>

Drybox Sterilite 20 Qt

Storage

RealNationPrint

Calibration &amp; Strip Remover v1&nbsp;A useful tool for 3D printing, especially for removing calibration lines, is a special spatula or print spatula. These tools are specifically designed for fine and precise work on the surface of 3D-printed objects without damaging the material. The print spatula typically features a flat, sharp edge that allows for efficient and clean removal of excess material.&nbsp;For my other designs visit:<a target="_blank" href="https://makerworld.com/en/@RealNationPrint" rel="nofollow noopener">https://makerworld.com/en/@RealNationPrint</a>  I&#39;d appreciate a like/follow/comment/Printrate and further support! Thank you Wanna buy me a coffee for my good work? <a target="_blank" href="https://www.paypal.me/Realmascha" rel="nofollow noopener">https://www.paypal.me/Realmascha</a>

Calibration & Strip Purgeline Remover

Calibration

Jorge Rui

First of all, I wanted to write something about my previous work, which is what brought me here.Following the Bamboo "<a target="_blank" href="https://www.printables.com/model/537144-bambu-lab-tools-and-accessories-box" rel="nofollow noopener">Lab - Tools and Accessories Box</a>" and after its unexpected success, I would like to thank everyone, without exception, for their support and kind words.<blockquote>I printed the thing in ABS. In fact, it's amazing that e.g., the hotends, cutters, wipers etc. fit so well _despite_ being printed in a material that isn't dimensionally stable. All in all, stellar job! <a target="_blank" href="https://www.printables.com/@jonas_303917" rel="nofollow noopener">@jonas_303917</a></blockquote><blockquote>I might play around with modeling the inserts, but my skill are pretty lacking. Your skills are off the charts. The fit and finish is extraordinary. I am sure lots will use it. <a href="/@JeffreyCompt_1114907" rel="nofollow">@JeffreyCompt_1114907</a></blockquote><blockquote>Really fantastic print, aesthetically pleasing build and helps keep spare parts tidy and organised. Was super simple to print due to the included 3mf file which orientates everything for you and gives you the correct slicer settings. The only change I made was to use tree supports as I love them for their many benefits. Didn’t have any issues with the handle, printed great. Thank you! <a target="_blank" href="https://www.printables.com/@Daniel_404952" rel="nofollow noopener">@Daniel_404952</a></blockquote>and the all-time best:<blockquote>Damn this is sexy. <a target="_blank" href="https://www.printables.com/@BenSreRsf_328430" rel="nofollow noopener">@BenSreRsf_328430</a>like from star trek :) <a target="_blank" href="https://www.printables.com/@SametMuric_392192" rel="nofollow noopener">@SametMuric_392192</a></blockquote>But I was especially attentive to the suggestions and criticisms of the whole community. One of those things was the printing time, yes it was long, especially when done all at once.<h4>What I bring is new…</h4>Now regarding this project, this will be made available in different modules, each one adding to the previous one. This is the first, the most basic, but probably the most flexible.You can find similarities with other modular systems, especially in this case those more industrial, since that is my professional background. And believe me, there are many…<h3>The Frame</h3>It will start with the frame. It will help to organize and keep the modules fixed relative to each other.<figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/556159/rich_content/98ac3e34-ccde-4b35-b49b-a1427dd0d3af/wall-frame.jpg#%7B%22uuid%22%3A%2282d1d52d-eb69-4eba-9a1e-04c796c8ba20%22%2C%22w%22%3A966%2C%22h%22%3A911%7D"></figure>The size of it can be what you want, places one next to the other like a tile. It can fill a wall and go forever. (It looks nice on the wall)<figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/d9fb0ba4-ce50-4e78-8925-15c58ae33e85/wall-frame-tile.jpg#%7B%22uuid%22%3A%22d1f7ba8c-b8ba-4580-9ea3-3079609757b2%22%2C%22w%22%3A1487%2C%22h%22%3A1080%7D"></figure>If you opt for wall mounting, there are two forms of fixation: the normal one for "normal" loads, and another, for a more robust fixation needs.<figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/556159/rich_content/a8914e3a-2717-4a47-99b4-1191cb1e5529/wall-frame-fixation.jpg#%7B%22uuid%22%3A%228a098261-3c43-490c-b53e-ed3c1b04a347%22%2C%22w%22%3A1345%2C%22h%22%3A1080%7D"></figure><h4>All-Stars</h4>As you can see in the above image, the connection is made with the stars in red. They will be the ones that will serve as an interface with the modules. This allows a correct spacing between modules, as well as their fitting, both horizontal and vertical.<ul><li>You have 2 types of stars, some for the base, thicker, and others for the top, thinner.</li><li>The ones you see half the size can be used on the frame edges but, only if you fill like it's necessary.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/62a04e2e-e664-4952-9436-6c3be9717a9b/start_types.jpg#%7B%22uuid%22%3A%229856da7c-76f0-4221-be4d-2a81ecd5bc22%22%2C%22w%22%3A661%2C%22h%22%3A530%7D"></figure><h4>Many possibilities …</h4>In addition to the wall, you can store your modules inside a drawer, so as not to pick up dust, or in a tool cabinet to store the drills by size.<figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/556159/rich_content/f5fb5c9f-0683-4577-aff6-31235566c524/img_0789.jpeg#%7B%22uuid%22%3A%220773fee3-5684-41da-8fe3-d4a13460e637%22%2C%22w%22%3A3274%2C%22h%22%3A2669%7D"></figure><ul><li>Currently, optimized for Bambulab printers, if there is interest, I can do for other print bed sizes, (like PRUSA, Creality and others).</li></ul><h3>The blocks</h3>Blocks are volumes that you can use to place your things. There is a base one, which is the smallest block you can see on the image, all the others are multiples of them, don't worry about the <a target="_blank" href="https://www.harveyperformance.com/in-the-loupe/best-practices-of-tolerance-stacking/" rel="nofollow noopener">stacked tolerance</a>, I've already worried about it for you... otherwise, if you don't know what it is, even better ;)<figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/769de2de-3d2c-4b8f-8755-952491457586/simples-blocks.jpg#%7B%22uuid%22%3A%22eeb5ab8d-e765-45b7-880a-1a5cd7bacc76%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure>When using the frame, together with the blocks, the combinations are endless, and you don't need to fill all the empty spaces.If you need need more blocks use this this link to download an app that will allow you to choose between does that are compatible with MMSS:<a target="_blank" href="https://drive.google.com/file/d/1kBbi6jkH3Bw8JuELBMyMwSw9vEwBuJDe/view?usp=share_link" rel="nofollow noopener">Tool to extract all the blocks</a><ol><li>Download</li><li>Install </li><li>Select the attachment icon and choose the block, or blocks with the size you need from the list</li><li>The click, “Extract attachment”</li></ol><blockquote>A Step file will be available for you to start modeling your custom module. This features all the sizes available for the MMSS. Other sizes will not fit. Other geometric formes besides squares and rectangles are possible (Example ‘L’ shapes" for that you may use Boolean operations with the basic blocks.</blockquote><h4><img src="https://media.printables.com/media/prints/556159/rich_content/976ede5e-5253-4268-9bee-623a9e14bb11/captura-de-ecra-2023-08-15-as-150848.png#%7B%22uuid%22%3A%225053f23f-cb98-4e63-b6f4-10868e5883c6%22%2C%22w%22%3A3226%2C%22h%22%3A1816%7D"> </h4>In a wall configuration, you can make the modules thinner or thicker, and even stack them on top of each other, thus, getting a very flexible solution.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/9b106500-aac3-487c-accb-47616fecbd96/stack-modules-front.jpg#%7B%22uuid%22%3A%22e716869a-d32f-4594-a9ab-2b7ca21f83a2%22%2C%22w%22%3A965%2C%22h%22%3A1080%7D"></figure></td><td><figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/dfca711b-551f-45be-870c-9b08e7a05a4e/stack-modules-lateral.jpg#%7B%22uuid%22%3A%2229201637-4e90-4c55-92f8-95f8b21e568d%22%2C%22w%22%3A693%2C%22h%22%3A1080%7D"></figure></td></tr></tbody></table></figure>Just an idea: this option needs a reinforced component due to the torque moment generated in the fixing points. If you stack blocks, the ”shaft” has to go through all o them and fixed to a Strong wall "fix.step" element and bolted from behind. If Someone justifies the use of this, I can make this solution available here. <h4>Do you like simpler? </h4>In minutes, you will have the module you need. Keep it in a drawer, next to your machine, computer, wherever you want. <figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/89cb3190-7f62-43b6-9eb8-de69bf89b43e/img_0788.jpeg#%7B%22uuid%22%3A%22dfffa446-3bf8-4760-bd45-762b7d1ab0df%22%2C%22w%22%3A2975%2C%22h%22%3A2343%7D"></figure>These simple shapes, with loose or fixed blocks, can be used as you wish and not only with tools or accessories for the 3D printer …The Boolean operation of subtraction, available in the slicer is your friend ;) You just need to have the template of what you want to use as a template.<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/887d258c-a7c9-49c1-9dab-707f3c6e2afc/glue-and-keys.png#%7B%22uuid%22%3A%22080cf7a1-d2e5-4c63-8a31-63329413d039%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure>You can create something very specific, like the tool holder above.<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/84b95e80-29b5-4cfe-8f4b-651fffdf8468/2x3-module-pocket-with-lid_open.jpg#%7B%22uuid%22%3A%22671eefca-4836-4a8c-88ca-02982deda636%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure>Or something more versatile, like this box with lid.But one thing is transversal to all the modules, the:<ul><li>Printing is simple, </li><li>on the material/color you want and </li><li>with the quantity you require.</li></ul>Example of application for a printer accessories and tools<figure class="image"><img src="https://media.printables.com/media/prints/556159/rich_content/91f257f6-1cf6-4ee9-ad4a-9b58c643653f/example-of-application-with-frame.jpg#%7B%22uuid%22%3A%2222721bf4-4096-4299-9d14-49d38cf6c56a%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D"></figure><h3>Print instructions</h3><ul><li>Do not use brims or supports, not needed. Other settings as you see fit. The included 3MF provides a good starting point.</li><li>The design, despite being simple, was thought out… At the dimensional level, there are adjustments with interference (slightly tighter). To ensure this, it is important to calibrate the material before printing, in the case of Bambulab printers it is important to calibrate the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/extrusion-calibration" rel="nofollow noopener">k factor</a> and the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate" rel="nofollow noopener">flow</a> (this can be done with or without LiDAR sensor, the links will send you to bambulab official wiki). This is critical in “stars” components, they must be tight. </li><li>On other printers, I suggest using similar methods.</li><li>The stars have a slight taper, put them on the print bed in a way that the larger face is facing up. </li></ul>If you still have difficulties with fitting, the slicer scale command is your friend ;) but only use it in the stars.<h3>Assembly instructions</h3><ul><li>Insert parts until you ear 2 or 3 clicks (layers with interference), you can use your pliers point to help on this, or any other tools you find appropriate.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/556159/rich_content/9283d3db-5815-4ac8-8502-01aacc38f712/img_0791.jpeg#%7B%22uuid%22%3A%22f7d0c791-83d0-4d28-b139-c245a51264fd%22%2C%22w%22%3A2711%2C%22h%22%3A2542%7D"></figure>Note<ul><li>If you think the layout is final and that may be a definitive solution and/or need a strong bond, use an epoxydic glue like Araldite on the interface surface but not between modules. </li></ul><h3>Available Modules </h3><h4>Prepared housing modules for Bambulab 3D printers:</h4><ul><li><a target="_blank" href="https://www.printables.com/model/557566-mmss-2x4-module-glue-stick-and-hexagonal-keys" rel="nofollow noopener">MMSS 2x4 Module - Glue Stick and Hexagonal Keys</a></li><li><a target="_blank" href="https://www.printables.com/model/557452-mmss-1x1-module-microsd" rel="nofollow noopener">MMSS 1x1 Module - MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/557397-mmss-1x1-module-nozzle-wipper" rel="nofollow noopener">MMSS 1x1 Module - Nozzle Wipper</a></li><li><a target="_blank" href="https://www.printables.com/model/557390-mmss-1x1-module-filament-cutter-microsd" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter + MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/559405-mmss-1x2-module-hotend-and-silicon-sock" rel="nofollow noopener">MMSS 1x2 Module - Hotend and Silicon Sock</a></li><li><a target="_blank" href="https://www.printables.com/model/561092-mmss-1x3-module-complete-hotend" rel="nofollow noopener">MMSS 1x3 Module - Complete Hotend</a></li><li><a target="_blank" href="https://www.printables.com/model/561215-mmss-2x3-module-small-scraper" rel="nofollow noopener">MMSS 2x3 Module - Small Scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/563010-mmss-2x3-module-pocket-with-lid" rel="nofollow noopener">MMSS 2x3 Module - Pocket with Lid</a><ul><li><a target="_blank" href="https://www.printables.com/model/563208-mmss-various-size-modules-pocket-with-lid" rel="nofollow noopener">Various sizes of pockets with lids.</a></li></ul></li><li><a target="_blank" href="https://www.printables.com/model/564616-mmss-2x5-module-liquid-glue" rel="nofollow noopener">MMSS 2x5 Module - Liquid Glue</a></li><li><a target="_blank" href="https://www.printables.com/model/580675-mmss-2x3-module-spool-holder" rel="nofollow noopener">MMSS 2x3 Module - Spool Holder</a></li><li><a target="_blank" href="https://www.printables.com/model/613965-bambu-lab-ams-service-and-spares-parts-for-the-mms" rel="nofollow noopener">MMSS for AMS Modules</a> <ul><li>4x Active extrusion wheel assembly;</li><li>4x Active support shaft assembly;</li><li>4x PTFE Tube Fast Connector;</li><li>4x Driven Support Shaft Assembly</li><li>1x First Stage Feeder</li></ul></li><li><a target="_blank" href="https://www.printables.com/model/557727-case-with-lid-for-mmss" rel="nofollow noopener">BOX with lid for MMSS</a></li><li><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for MMSS</a></li></ul>More to come… I'm always adding new modules, please check <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">my profile </a> and here on <a target="_blank" href="https://makerworld.com/pt/u/3059492201" rel="nofollow noopener">makerworld.com</a> for the later information, some are free, others are only available as exclusives for members of "<a target="_blank" href="https://www.printables.com/@jorge_rui/exclusive-models" rel="nofollow noopener">my club</a>".&nbsp;You can see in the context, with the specially designed <a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">MMSS case</a><figure class="media"><div data-oembed-url="https://youtu.be/7BvKN2LLuL0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/7BvKN2LLuL0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>… and <a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">mmss box</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KTnRSS5wA4w"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KTnRSS5wA4w" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><ul><li> </li></ul>&nbsp;<h4>Office housing modules</h4><ul><li><a target="_blank" href="https://www.printables.com/model/563010-mmss-2x3-module-pocket-with-lid" rel="nofollow noopener">MMSS 2x3 Module - Pocket with Lid</a></li></ul><h4>Conclusion</h4>I just hope you like this as much as I do and understand the potencial of this.<h4> </h4><h3>Ideas for remixes </h3><ul><li>change the blocks to your needs.</li></ul><h3>Change log:</h3><ul><li>(19-08-2023) – Added a frame for smaller print bed sizes, like PRUSA Printers and other. (Framed_prusa.step). STEP files are more flexible and contains more information when compared to STL. Just drag and drop on the excellent PRUSA slicer, and you are good to go. ;)<ul><li>Added some more basic blocks.</li></ul></li><li>(24-08-2023) - Added modified start for does having difficulty assembling the stars that connect the base to the modules (the two-level stars). "Star_4P_frame_modified.step" and“Star_2P_frame_modified.step”. If you encounter this “problem” it is best to <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_pa" rel="nofollow noopener">calibrate your filament </a> instead of using this alternative files.</li><li>(14-10-2023) - Added some more basic blocks</li></ul>&nbsp;<h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.

Multi-Modular Storage System -MMSS

MMSS

Kubikossi

This is the new version of my universal spool for Bambu AMS.(Dies ist die neue Version meiner Universal Spule für das Bambu AMS.)&nbsp;Print Profiles for PLA, ABS and PETG Gone are the days when you had to search for or print filament clips. Gone are the days of having to fumble the filament through spool holes. The new v2 spool already has the clips integrated.(Vorbei die Zeiten, in denen man Filamentclips suchen oder drucken musste. Vorbei die Zeiten, in denen man das Filament durch Spulen-Löcher fummeln musste. Die neue v2 Spule hat die Clips bereits integriert. )&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/400790/2024-01-05_4bd3d671de7e2.jpg">Wind up the filament after printing, clip it to the side and you're done.(Filament nach dem Druck aufwickeln, seitlich anclipsen, fertig.)&nbsp;The spool is compatible with the v1 and v2 cores.(Die Spule ist kompatibel zu den v1 und v2 Kernen.)&nbsp;The inlay (for silica gel or ballast) is now new. This is now screwed in from the outside (old version inside) and has a left-hand thread and only fits the v2 version. This means that the spool (right-hand thread) in the AMS cannot untwist itself.(Neu ist jetzt das Inlay (für Silica Gel oder Ballast). Dieses wird jetzt von außen verschraubt (die alte Version sitzt innerhalb) und besitzt ein Linksgewinde und passt nur für die v2 Version. Dadurch kann sich die Spule (Rechtsgewinde) im AMS nicht selbstständig aufdrehen.)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/400790/2024-01-05_2ac5ab737b3cc.jpg"> The old silica tubes are not compatible with this version.(Die alten Silica-Tubes sind mit dieser Version nicht kompatibel.)&nbsp;For the core, I recommend printing a brim and reducing the side AUX fan to 40% or less to prevent warping and loss of adhesion.(Für den Kern empfehle ich einen Brim zu drucken sowie den seitlichen AUX-Lüfter auf 40% oder weniger zu reduzieren, um warping und Haftungsverlust zu verhindern.)