john.darst

JamesThePrinter

*This project requires one 608 bearing*There is a printable spring that adds a slight clicking sound when the carousel is spun. This is recommended, but optional.As with any assembly that prints in multiple pieces and/or uses other components, actual clearances will be dependent on YOUR printer.&nbsp;<figure class="media"><oembed url="https://www.youtube.com/shorts/D3xfdgBf4jE"></oembed></figure>Print SettingsThe Nintendo Switch logo in the middle of the carousel is designed to give you two options:<ul><li>If you have an AMS, MMU or similar product, the logo can be easily painted in the slicer</li><li>If you do not paint it in the slicer, the logo will not appear at all</li></ul>&nbsp;Assembly Instructions<ol><li>Insert a 608 bearing into the center of the base</li><li>If you are using a spring, use a very small amount of glue to secure it into the hole as shown below</li><li>Place the carousel on top of the base, ensuring that the gear tip drops into the center of the bearing</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014299/design/2023-09-12_pikoqdkmfdj3.png"></figure> <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the pictures above:<ul><li>Bambu Lab Red Matte Scarlet Red PLA</li><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Ivory White PLA</li></ul>

Nintendo Switch Game Carousel

Gaming

Bre3Dlove Designs

My take on a Caliper Holder for the Honeycomb Storage Wall (HSW).Easy print, no supports needed.&nbsp;Optional HSW insert included on the plate<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000456068/design/2024-05-06_a81ba90493f0b.gif">&nbsp;&nbsp;&nbsp;&nbsp;===<h4>If you like this model, please remember to boost 🚀 and hit the like button 👍🏽</h4>&nbsp;&nbsp;Other models available at: <a target="_blank" href="http://bre3dlove.com/" rel="nofollow noopener">Bre3Dlove.com</a>

Caliper Holder - HSW mount |Honeycomb Storage Wall

Powerpill.prints

<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-02-07_f741b2d0652f9.png"> This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 45 minutes to 1.5h to print!<h2>This Pokemon Keychain pack includes the following Characters: Raichu, Venusaur, Blastoise, Psyduck, and Totodile!</h2><h2>Check out My other Pokemon Packs here:</h2><figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/234438#profileId-250977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-03-04_2b0f305261921.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/234438#profileId-250977" rel="nofollow noopener">Pokemon Keychain Pack #6</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/253647#profileId-270086" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-06-18_c11965538aa41.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/253647#profileId-270086" rel="nofollow noopener">Pokemon Keychain Pack #7</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/472759#profileId-382643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-06-18_7037cee7c2094.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener">Pokemon Keychain Pack #8</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/503298#profileId-418741" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-06-18_ee2dfb693b7bd.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/503298#profileId-418741" rel="nofollow noopener">Pokemon Keychain Pack #9</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-01-15_4b712df4c57ba.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-01-15_ed5d31eadc8b3.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-01-15_2f3f64f70a6df.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-01-15_366891a0ec5ab.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-01-15_d454162579477.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-01-15_9db4c750c919b.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Hope you Catch, er, Print them all!! Like this pack? Check out my other video game keychain packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-05-17_1b51dac6130d8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-05-17_3888685c1d948.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-05-17_231c0706c647e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/442832#profileId-348820" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-05-17_6d105be145fb8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/442832#profileId-348820" rel="nofollow noopener">Pac-Man Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/399835#profileId-301320" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-05-17_8201d7f9605df.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/399835#profileId-301320" rel="nofollow noopener">Yoshi Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000177083/design/2024-05-17_7b7272f64e966.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Pokemon Keychain Pack #4 - Venusaur, Blastoise

Kids

Mayflower10

This is my version of Patrick Mahomes! just ready before the Super Bowl!!&nbsp;0,08 extra fine, first layer 0,2mm100% infile, 3 walls&nbsp;Start with black until layer 5Then red until layer 15then yellow until layer 17white to finish until the end&nbsp;Enjoy!

Mahomes hueforge

Texas Tech

Cameron Lipich

They work really well, but they fit better going in the mounting strips from a certain direction. When you print them, try both directions and see which is better. It fits different depending on the direction due to the way that the strips are cut

Seed Pixel Mounting Strip Adapter

Light Show

DonMatis

GrinchTree is here, carrying evil plans to takeover your home decoration for Xmas!!&nbsp;Can be used in the following combinations:<ul><li>Half Christmas tree with Grinch filament painting</li><li>Grinch filament painting only, as wall decoration</li><li>Join 2 half's of the Christmas tree model to make a full Christmas tree</li></ul>Added two colour choices Green (to combine with Green Tree) and Grayscale (my traditional style to combine with Silver, Black or White Tree).&nbsp;As usual, print the Filament Painting part with 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;<figure class="table" style="width:98.42%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/180301/2023-11-17_dffb8875f5848.jpg"></figure></td><td>Filaments Used:<ul><li> PLA Overture Black</li><li> PLA PolyTerra Charcoal Black</li><li> PLA Overture Cement Gray</li><li> PLA Ziro Dark Gray | or PLA Sunlu Gray</li><li> PLA BambuLab Basic Gray</li><li> PLA Ziro Light Gray | or Overture Light Gray</li><li> PLA Overture White</li></ul>Swap Instructions:<ul><li> Start with Black</li><li> At layer #7 (0.64mm) swap to Charcoal Black</li><li> At layer #9 (0.8mm) swap to Cement Gray</li><li> At layer #11 (0.96mm) swap to Dark Gray</li><li> At layer #14 (1.2mm) swap to Gray</li><li> At layer #20 (1.68mm) swap to Light Gray</li><li> At layer #22 (1.84mm) swap to White for the rest.</li></ul></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/180301/2023-11-17_066bf072866c7.jpg"></figure></td><td>Filaments Used:<ul><li> PLA Overture Black</li><li> PLA PolyTerra Charcoal Black</li><li> PLA Ziro Translucent Green</li><li> PLA Ziro Fluo Green</li><li> PLA+ Esum Green</li><li> PLA Overture White</li></ul>Swap Instructions:<ul><li> Start with Black</li><li> At layer #7 (0.64mm) swap to Charcoal Black</li><li> At layer #10 (0.88mm) swap to Translucent Green</li><li> At layer #21 (1.76mm) swap to Lime Green</li><li> At layer #26 (2.16mm) swap to Peak Green</li><li> At layer #28 (2.32mm) swap to White for the rest.</li></ul></td></tr></tbody></table></figure>&nbsp;Highly recommend to use the provided printing profiles for good results! Looking forward to see your prints!&nbsp;<blockquote>Enjoy my work? Support me by joining my club on <a target="_blank" href="https://www.printables.com/@DonMatis" rel="nofollow noopener">printables</a>. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>&nbsp;&nbsp;

Grinch Tree

Christmas 

BODY3D

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>

Ghost Booh

Halloween

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls