Dragoneye Jo

APXLVLDZN

REMIX: SCALED TO 600% REDUCED WALLS, REDUCED INFILL, SKINNY TREE SUPPORTS &nbsp;OVERHANGS UNDERNEATH ARE ROUGH BUT VISIBLE SURFACES ARE NICE. &nbsp;BLOCKS ARE A TIGHT FIT, NOT SUPER EAST TO GET TOGETHER OR APART

GIANT 2X2 LEGO LIKE BRICK

lego

Tack3D

I have remixed one of my models with 2 other and added some more to create this all in one tool holder for AMS riser v2 / v3 It can house 2 snippers, 1 deburring tool, 1 bambu lab scraper or 1 caliper, and 1 bambu lab liquid glue. Has 3 attachment points. Print with build plate supports only for the attachment points

All in one tool holder for AMS Riser v2 v3

Addition to Printers Function

R C 3D

PRINT PROFILES: The following are the only print profiles tested and approved by me. They are listed by the name I provided in the print profile description. I cannot guarantee the quality of any print profile that hasn’t been uploaded by me.&nbsp;<ul><li>Pokeball Upper</li><li>Pokeball Lower</li><li>Pokeball Top Shell</li><li>Pokeball Bottom Shell</li><li>Pokeball Button</li><li>Pokeball v2</li><li>Pokeball Stand</li><li>Great ball</li><li>Ultra ball</li><li>Master ball</li></ul>&nbsp;SUMMARY: This is a simple pokeball that I designed to print without any additional hardware, and minimal supports. The intent was to make the pokeball as easy to print and assemble as possible, while remaining tough and functional. If you find any issues, leave me some feedback please.&nbsp;Printing/Assembly:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>Global Settings:<ul><li>6 Wall Loops</li><li>Gyroid Infill</li></ul></li><li>Red and White Pokeball Shell:<ul><li>Enable Supports: Normal (Auto)<ul><li>Snug</li><li>On Build Plate Only</li></ul></li></ul></li></ul>Assembly:The assembly is done by first gluing the top shell and bottom shell to the pokeball internals. There’s a small square tab to help align the pieces. Once the glue is dry, slide a small piece of filament through the hinge while holding the two halves together. Cut the ends flush to the pokeball. I add a drop of glue to the outside pieces of the filament since the center hinge piece is the only one that needs to rotate in order to operate. Finally, glue the button onto the pokeball. There’s a post designed to help align the pieces.&nbsp;The filament piece used for the hinge will be tight, so you might have to take an allen key and hollow out the hole a bit to get it to slide into place.&nbsp;That's all there is to it. Follow my facebook page, RC3D, for giveaways and entry details as well as my latest models.&nbsp;CHANGELOG:&nbsp;UPDATE 12/3/2023:Added great ball, ultra ball, and master ball tops. I only added the top because everything else is the same, so I'll include 3 separate print profiles for these.&nbsp;UPDATE 11/26/2023:Added a guide post for the button, revised the connection to fit better, thickened the shells to prevent the banding, added alignment squares to align the shell and internals, added a stand.&nbsp;INITIAL RELEASE (10/19/2023)I created this model because the other Pokeball models I found either used external parts or didn't operate how I wanted. This one is designed to open and close using the button on the front. The button isn't 100% required to open the ball, but the intent was to make it functional so it just makes the ball pop open freely. The inside has a flat spot to aid in aligning the outer shell and make printing easier.&nbsp;

Fully Printable Pokeball Set

Dain

lindh3d

I designed this to be printed without support and as one piece.It will take about 1kg of plastic and over 24 hours to print. But I think this is a super nice practical print to have at home or in the garden or when camping etc…&nbsp;Made a small update to my print-in-place portable stool. I also made an instruction video on how to open it up the correct way without breaking it or cutting it open.Perfect print to use up all those leftover spools with just a few grams of filament on.The weight limit is not tested to its full potential.My weight is 85kg and a friend of my have tested it and his weight is 90kg. No problem at all. I guess it will be able to withstand 120-150kg if you sit perfectly in the center and don't wiggle on it <img src="https://static.xx.fbcdn.net/images/emoji.php/v9/t80/1/16/1f92a.png">. It's a print-at-your-own-risk thing <img src="https://static.xx.fbcdn.net/images/emoji.php/v9/t83/1/16/1f60e.png">&nbsp;Rekommended printsettings:0.4 nozzle4 Parimiters0.16 layer height15-20% infill gyroid5 top/bottom layersSupport yes : Snug Support from build platePrint mode: Arachne&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/PND58IzI9xc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/PND58IzI9xc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/VZa5Ko11Rl0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/VZa5Ko11Rl0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;EDIT: 231003More pegs for more weight support.0.1mm z offset for rings. this will make them tighter at first when printing making for easier and successful print. But more force when using the stool the first time is needed.&nbsp;EDIT: 231005 Added an extra chamfer on the inside ring to be able to take more force when disassembling the first time.&nbsp;EDIT: 231022 Larger holes on the top and bottom part for larger fingers :)Removed support for holes, new design can now use regular snug support for the top holes&nbsp;EDIT: 231203 After requests, I have now made a smaller kids version. This will also fit the A1 mini printbed size.

Portable stool (twist an sit)

Joanna

jcbohman

This model is for use in vehicles that may have empty seats but faulty sensors which cause the chime to go off, or for use when transporting heavy items on your seat that you may not be able to strap into place. I do not condone not using a seatbelt, and statistically you could be severely hurt or even killed from not wearing one while in an accident, so for legal reasons, this print is for “educational” purposes only and do NOT advise using this in place of your own seatbelt, and I cannot be held responsible for any injury or death one could incur from the misuse of this “educational” item.

lego

Addition to Printers Function

Dain

Joanna

grandma linda