jmirmelli

Myzhar

<blockquote><h3><span style="background-color: rgb(255,255,255); color: rgb(28,28,28); font-size: 14px"><i><strong>If you find this project useful, be sure to give it a thumbs up 👍🏻 to help more people discover it. </strong></i></span><br><span style="background-color: rgb(255,255,255); color: rgb(28,28,28); font-size: 14px"><i><strong>Your <u>Boost</u> 🚀 will also let me know that you appreciate my work. </strong></i></span><br><span style="background-color: rgb(255,255,255); color: rgb(28,28,28); font-size: 14px"><i><strong>Thanks a lot, Walter :)</strong></i></span></h3></blockquote><p><i>Update 2024/02/25: New version v2 with axes labels and new overhangs test on the top faces</i></p><p>&nbsp;</p><p>This is a stress test that I designed to calibrate the settings of my 3D printer for ASA and ABS materials, but it can also be used for other types of filaments.<br> </p><p><strong>Bed adhesion</strong>: the size of the base is 80 mm, its height is 3 mm and the vertices are square. <i>If the bottom plane tends to rise from the bed, then raise the bed temperatures and/or use glue.</i></p><figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-02-15_a307cccdfa5c6.jpg"><figcaption>[ASA] Bed adhesion and quality of top surfaces</figcaption></figure></td><td><figure class="image image_resized" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-03-01_7a9f80deffd.jpg"><figcaption>[ABS] Bed adhesion and quality of top surfaces</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p><strong>Flow: </strong>the large planar surfaces of the base and the second level allow you to check the quality of the print and validate the flow and pressure advance settings.<i> If there is too little or too much material near the edges of the plane, then perform a </i><a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_pa" rel="nofollow noopener"><i><strong>Flow Dynamic Calibration</strong></i></a><i> to find the correct K value for the filament, and a</i><a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate" rel="nofollow noopener"><i> <strong>Flow Rate Calibration</strong></i></a><i> to fix the flow rate parameters for the material</i></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-02-25_1452201eb8cbc.jpg"><figcaption>Flow control along the axis</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-02-25_577154028ad02.jpg"><figcaption>Flow control along the Y axis</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p><strong>Wall quality: </strong>the five different wall types/sizes allow you to tune the external wall speed. The bottom of the sphere and the 45% surface slopes (v2) on the top allow you to tune the overhang settings (cooling and speed).</p><figure class="table" style="width: 83.2%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 55.38%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-02-25_b998449e7c31.jpg"><figcaption>[ASA] Overhangs check result</figcaption></figure></td><td><figure class="image image_resized" style="width: 66.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-02-25_4d147c5095142.png"><figcaption>Overhangs and different surfaces</figcaption></figure></td><td><figure class="image image_resized" style="width: 95.22%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-03-01_f9a2a906ae13d.jpg"><figcaption>[ABS] Overhangs check result</figcaption></figure></td></tr></tbody></table></figure><p><strong>Small perimeters:</strong> the two top cylinders allow you to check the quality of small perimeter settings.</p><figure class="image image_resized" style="width: 57.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-02-25_47a965d9e4515.jpg"><figcaption>Small perimeters and hole</figcaption></figure><p><br><strong>Precision checks:</strong></p><ul><li><i>Base width:</i> 80 mm</li><li><i>Second base width:</i> 50 mm</li><li><i>Square column width:</i> 15 mm</li><li><i>Sphere diameter:</i> 30 mm</li><li><i>First cylinder diameter:</i> 10 mm</li><li><i>Second cilinder diameter: </i>5 mm</li><li><i>Hole diameter: </i>3 mm</li><li><i>Hole wall: </i>1 mm</li></ul><figure class="image image_resized" style="width: 41.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-02-15_87afeb86f167.jpg"><figcaption>Validating the precision</figcaption></figure><p><strong>Belt tensioning: </strong>if the external walls present wobbles then you must <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/belt-tension" rel="nofollow noopener">fix the belt tension of your printer</a>.</p><figure class="image image_resized" style="width: 40.74%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000187139/design/2024-02-15_30adab718606e.jpg"><figcaption>Wobbles (old v1 image)</figcaption></figure><p><strong>Robustness and layer adhesion: </strong>try to break the column by hand. If you can&#39;t then the temperature, the infill, and the flow settings are very good.</p><p>&nbsp;</p><p>If you want to remix the model, you can find it on <a target="_blank" href="https://cad.onshape.com/documents/983ac572c575ad90eec56080/w/ad6133a1d5e53377ef56fd71/e/a11e37f7c28f171bd058486f?renderMode=0&amp;uiState=65cdf8580bc2b577b9022890" rel="nofollow noopener">OnShape</a>.</p><p>&nbsp;</p><p>Happy tuning… and do not hesitate to add comments to improve the model.</p>

ABS ASA stress test and calibration

test prints

ntalekt

<p>There are many game console controller models available. I wanted a horizontal stand that could fit easily into a drawer, but also fit multiple controllers.</p><p>&nbsp;</p><p>I remixed <a href="/matt_longieliere/designs" rel="nofollow">matt_longieliere</a>&#39;s original controller stand using Fusion 360 to fit 4 controllers and it&#39;s working great!</p><p>Printed at 0.16mm layer height on my BambuLab P1P using</p><ul><li><a target="_blank" href="https://amzn.to/3ENMdGQ" rel="nofollow noopener">PolyTerra Matte Cotton White PLA</a></li><li><a target="_blank" href="https://amzn.to/3EMooPt" rel="nofollow noopener">PolyTerra Matte Charcoal Black PLA</a></li><li><a target="_blank" href="https://s.click.aliexpress.com/e/_DDHWrSx" rel="nofollow noopener">Bambu Textured PEO build plate</a></li></ul>

Xbox 360 Controller Stand - Dual & Quad

gaming 

Josh-3D

<p>Check out the other two games I&#39;ve made in this series</p><p><a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a></p><p><a target="_blank" href="https://makerworld.com/en/models/128570#profileId-139240" rel="nofollow noopener">TicTacToe</a></p><p>&nbsp;</p><p>A Travel Chess Game! The follow up to my Tic Tac Toe game. Tic Tac toe is a pretty fun little game, but I think most of us advance past it once we&#39;re out of our kid years. For those wanting a little more, I present Chess! Travel Edition!</p><p>&nbsp;</p><p>It&#39;s setup so you can take the board on the go, even mid game if that&#39;s the situation you need to handle. I added a few little notches to help keep the lid secure, but just to be safe and sound, I&#39;ve included a strap much like that made by <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>on the TicTacToe game. The strap comes in two flavors, depending on how you feel. There&#39;s a 2 color version, and a single color version for those that want something a little simpler, faster to print.</p><p>&nbsp;</p><p>Enjoy!</p><p>&nbsp;</p><p style="text-align:center;">-------</p><p>If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.</p>

Chess - Travel Edition

travel games

Brian Dean

<h2><strong>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</strong></h2><h3>PROFILE NOTE</h3><p><strong>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</strong></p><h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol><p>See below for the more detailed update notes.</p><h2><strong>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</strong></h2><p><span style="color:rgb(55,65,81);font-size:16px;">The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.</span></p><h3><strong>Key Features</strong></h3><h4><strong>Dual Dispensers for Perfect Alignment</strong></h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4><strong>Design and Utility</strong></h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4><strong>Ease of Use</strong></h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4><strong>Convenience and Storage</strong></h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4><strong>Customization and Printability</strong></h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4><strong>Visual Guide</strong></h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4><strong>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</strong></h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of <i>Version 5</i></h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol><p>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.</p><p>&nbsp;</p><p>NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.</p><p>&nbsp;</p><p>STEP and STL raw files are included if you do not wish to use the provided profile.</p><h3>Quality Assurance Testing</h3><ul><li><span style="color:rgb(55,65,81);font-size:16px;">All dispenser sizes have been printed by me and extensively tested</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">I have purchased all magnet sizes at significant expense to myself to ensure fit</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit</span><ul><li><span style="color:rgb(55,65,81);font-size:16px;">Multiple iterations of each dispenser were printed and refined</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">Many kilograms of filament and hundreds of hours of print-time were consumed during this process</span></li><li><span style="color:rgb(55,65,81);font-size:16px;">All to ensure the best quality printing and fit-up for each dispenser size</span></li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3><p>Be sure and check out some nice accessories that other folks have created to work with these dispensers.</p><ul><li><strong>Tip Caps</strong> - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li><strong>Vertical Workbench Stand</strong> - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li><strong>Vertical Workbench Stand (parametric)</strong> - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3><strong>Version 2: 2023-11-20</strong></h3><p>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.</p><ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

Embedded Magnet Dispenser Tool for 3D Prints

printer tools

ZEE SOLO

<p>An organising shelf for IKEA Skadis boards. Different sizes available as print profiles.<br> </p><p><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;">Mounted using </span><a target="_blank" href="https://www.printables.com/model/472294-skadis-t-clip-system-low-profile-flush-mount-clips" rel="nofollow noopener">Low Profile T-Clips</a><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;"> by </span><a target="_blank" href="https://www.printables.com/@tchoupshop_82950" rel="nofollow noopener">tchoupshop</a><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;"> to</span><strong> </strong><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;">fit flush. The clips come in two versions - one for black/white Skadis boards, and one for unpainted ones (not included here; please download from the creator).</span></p><p>&nbsp;</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">I made a </span><a target="_blank" href="https://makerworld.com/en/models/55181#profileId-56713" rel="nofollow noopener">T Clip tool</a><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;"> to make turning the clips easier, especially the </span><a target="_blank" href="https://www.printables.com/model/472294-skadis-t-clip-system-low-profile-flush-mount-clips" rel="nofollow noopener">flushed version</a><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">.</span></p>

IKEA Skadis Shelves (Different Sizes) - T Clips

skadis

Riccardo.B

<p>Box intended to be printed with PETG.</p><p>No hardware needed, lid snaps in place.</p><p>Latch is elastic.</p>

Elastic latch box - small

Grumpy Ol Vet Printing

<p>Cardboard spool adapter for Inland brand filament to be used in the AMS. </p><p>&nbsp;</p><p>*After I uploaded this I realised that one of my newer rolls of inland filament (blue glass PLA) has cardboard almost twice as thick as the normal rolls, and the spool diameter is not the same. This will not fit on that roll. It fits on every other roll of inland filament that I've tried though.</p>

Inland Cardboard Spool Adapter

filiment holder

ShakurityZone

<p><span style="background-color:rgb(18,20,21);color:rgb(202,197,190);font-size:16px;">I made a shape stencil to help with learning shapes! </span></p>