Jonathan_Sto

A housing for the Waveshare 7.5 inch display. A battery, the ESP32 and the charging electronics can be accommodated in the housing.&nbsp;Necessary parts: <a target="_blank" href="https://www.amazon.de/Waveshare-Universal-Bluetooth-Wireless-Verschiedene/dp/B07RM1BBVF/ref=sr_1_3?__mk_de_DE=%C5M%C5%8E%D5%D1&crid=VTKORXZR3CG1&keywords=esp32+waveshare&qid=1704894697&sprefix=esp32+waveshar%252Caps%252C157&sr=8-3&_encoding=UTF8&tag=httpspacde-21&linkCode=ur2&linkId=e5df95b029da0c0a024dd9a6deb87ad4&camp=1638&creative=6742" rel="nofollow noopener">ESP32 Mikrochip Waveshare</a>  <a target="_blank" href="https://www.amazon.de/Waveshare-Resolution-Electronic-Controller-Communicating/dp/B075R69T93/ref=sr_1_5?crid=2I3AVKWHOKVG8&keywords=waveshare+7.5&qid=1704894813&sprefix=waveshare+7.5%252Caps%252C183&sr=8-5&_encoding=UTF8&tag=httpspacde-21&linkCode=ur2&linkId=4b3141cd4d913f944478ff7501008aab&camp=1638&creative=6742" rel="nofollow noopener">Waveshare 7.5 E-Ink Display</a> <a target="_blank" href="https://www.amazon.de/AZDelivery-TP4056-Batterieladungsmodul-Schutzschaltung-Einzelzellenbatterien/dp/B0CBKMCBHC/ref=sr_1_5?__mk_de_DE=%C5M%C5%8E%D5%D1&crid=2ALELY9B4DIWD&keywords=tp4056+usb+c&qid=1704894943&sprefix=tp4056+usbc%252Caps%252C148&sr=8-5&_encoding=UTF8&tag=httpspacde-21&linkCode=ur2&linkId=800979351b5039b183057f7e58619a4d&camp=1638&creative=6742" rel="nofollow noopener">Chargeelectronics</a> (TP4056) <a target="_blank" href="https://www.amazon.de/Seamuing-Schutzplatine-Isolierband-1-25-Stecker-ESP32-Entwicklungsplatine/dp/B08V11Z88Q/ref=sr_1_2?crid=20DWQI4KGW1VF&keywords=3000mah+3%252C7v&qid=1704894995&sprefix=3000mah+%252Caps%252C148&sr=8-2&_encoding=UTF8&tag=httpspacde-21&linkCode=ur2&linkId=d72af4eb5b5173da0b588dfbb76299ec&camp=1638&creative=6742" rel="nofollow noopener">Battery</a> (3.7V)  <a target="_blank" href="https://www.amazon.de/Female-Female-Male-Female-Male-Male-Steckbr%C3%BCcken-Drahtbr%C3%BCcken-bunt/dp/B01EV70C78/ref=sr_1_5?crid=384PX43FR38E0&keywords=jumper+wire+set&qid=1704895080&sprefix=jumperwi%252Caps%252C182&sr=8-5&_encoding=UTF8&tag=httpspacde-21&linkCode=ur2&linkId=aae855827cc8940a6ae55d14d533d831&camp=1638&creative=6742" rel="nofollow noopener">Jumpercabel</a> (Not absolutely necessary, can simply be soldered instead) <a target="_blank" href="https://www.amazon.de/GTIWUNG-Steckverbinder-Pin-Verbindungsstecker-Connector-Kabeldraht/dp/B07VYR7J49/ref=sr_1_4?__mk_de_DE=%C5M%C5%8E%D5%D1&crid=2O1XBPMO833BD&keywords=jst+1.5+gtiwung&qid=1704895244&sprefix=jst+1.5+gitiwung%252Caps%252C126&sr=8-4&_encoding=UTF8&tag=httpspacde-21&linkCode=ur2&linkId=c4ded2d88d7af8adb9241808dcd384bb&camp=1638&creative=6742" rel="nofollow noopener">Batterycabel</a> (Not absolutely necessary, can simply be soldered instead) Screws (2x10mm)&nbsp;Necessary tools: Soldering iron 3D printer to print the housing. You can of course also build your own housing from wood/cardboard etc.&nbsp;Assembly: The display is attached to the front using double-sided adhesive tape. The ESP32 and the battery can be inserted into the housing. Unfortunately, the charging electronics are also glued as they have no cut-outs for screws. I simply used hot glue. Take care not to drill into the cables with the screws when screwing them together.&nbsp;More details: <a target="_blank" href="https://spacepc.de/wetter-display-mit-esp32-und-3d-druck-gehaeuse/" rel="nofollow noopener">https://spacepc.de/wetter-display-mit-esp32-und-3d-druck-gehaeuse/</a>  Software:<a target="_blank" href="https://github.com/G6EJD/ESP32-e-Paper-Weather-Display" rel="nofollow noopener">https://github.com/G6EJD/ESP32-e-Paper-Weather-Display</a>&nbsp;Print settings: 0.2mm(standard), gyroid infill, tree support.

E-Paper Weather Display Waveshare 7.5" ESP32

Smart Home

dashmik

Easy print, works well, i printed from PLA. You can choose from 4 types of bookmarks.

Harry Potter bookmark set 2

Jirik

ABDELat

Fast and easy to print Gridfinity Base for <a target="_blank" href="https://www.ikea.com/at/en/p/alex-drawer-unit-white-00473546/" rel="nofollow noopener">Ikea Alex Drawer (36x70 cm)</a>. The printfile contains 5 plates with all necessary parts for 1 drawer.If your looking for bins, I&#39;ve an <a target="_blank" href="https://makerworld.com/de/models/47599" rel="nofollow noopener">ultimate collection</a> for that.<ul><li>Plate 1<ul><li>Grid 4x5</li><li>23x Connector (22 needed + 1 spare) optional</li></ul></li><li>Plate 2<ul><li>Grid 4x5</li></ul></li><li>Plate 3<ul><li>Grid 3x5</li><li>Grid 2x4</li></ul></li><li>Plate 4<ul><li>Grid 3x5</li><li>Grid 2x3</li></ul></li><li>Plate 5<ul><li>Spacer</li></ul></li></ul>PLA printtime: ~3:55h and 116,9g material (single color)PETG printtime: ~4:25h and 115,0g material (single color)&nbsp;I recommend to put the 2 small grids and the spacer in the back of the drawer.The grid can be printed in PLA or PETG. I recommend 0.4mm nozzle and 0.2mm layer height.&nbsp;Additional Tools and Helpers<ul><li><a target="_blank" href="https://makerworld.com/models/208796" rel="nofollow noopener">Gridfinity Height ruler - slim Edition</a>: Helps you to find the correct bin height.</li><li><a target="_blank" href="https://makerworld.com/en/models/476336" rel="nofollow noopener">AIO parametric Gridfinty Project</a>: Generate you own gridfinity bin.</li><li><a target="_blank" href="https://makerworld.com/en/models/28581" rel="nofollow noopener">Slim Gridfinity Base for Ikea Alex:</a> Perfectly fitting grid for Ikea Alex Drawer</li></ul>&nbsp;Source: <a target="_blank" href="https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors" rel="nofollow noopener">Gridfinity Base</a> <a target="_blank" href="https://www.printables.com/model/535032-gridfinity-ikea-alex-spacer-with-snap-connectors" rel="nofollow noopener">Spacer</a>&nbsp;<h4>A1 mini Edition:</h4>I&#39;ve included a profile for all A1 mini user out there. Basically you&#39;ll need three 4x4-Grids and three 3x4-Grids. The Spacer is cut in half, so it fits the print plate. You don&#39;t need to glue them together. Just use some connectors. The connectors are optional. You just need them if you don&#39;t fill the drawer space all with bins.<h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the Download). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.

Slim Gridfinity Base for Ikea Alex Drawer

Ikea

wuguigui

<h2>Summary</h2>There is a specialized LED Kit for this mushroom lamp on Amazon now:<a target="_blank" href="https://www.amazon.com/dp/B0D75SLLY9?maas=maas_adg_FD4EEC810D7A3AE13B04CDE09F6026DD_afap_abs&amp;ref_=aa_maas&amp;tag=maas" rel="nofollow noopener">Mushroom Lamp Components Kit for 3D Printing</a>&nbsp;Updated 12/03/2023 A new cute pocket-size rechargeable mushroom lamp at: <a target="_blank" href="https://makerworld.com/en/models/12926" rel="nofollow noopener">https://makerworld.com/en/models/12926</a>I made a mushroom night lamp based on the small mushroom I made before: <a href="/thing:4978281" rel="nofollow">https://www.thingiverse.com/thing:4978281</a>It&#39;s easy to assemble, without screws(maybe need a little glue to stick the 9 caps on the head). I recommend LED light（less than 3.5W) with E27 holder for this lamp.If you were in China, you can buy the LED light and holder at: <a target="_blank" href="https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8" rel="nofollow noopener">https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8</a>Thank you for loving it! :)I also update a new version at( see the image below): <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a</a>it has a new structure and is more compact with less filament.other 2 cute mushroom lamps:Mushroom Lamp B: <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b</a>Mushroom Lamp C(suit small space 3d printers): <a target="_blank" href="https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c</a>A funny Banana Lamp(free): <a href="/thing:5216983" rel="nofollow">https://www.thingiverse.com/thing:5216983</a>Banana Lamp 2.0: <a target="_blank" href="https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated</a>My other designs: <a target="_blank" href="https://makerworld.com/en/u/2112721175" rel="nofollow noopener">https://makerworld.com/en/u/2112721175</a><h2>Print Settings</h2>Printer:snapmaker 2.0 A250 &amp; anycubic i3&nbsp;Rafts: No&nbsp;Supports:Yes&nbsp;Resolution: 0.2&nbsp;Infill:30-40%Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=any+PLA%2B" rel="nofollow noopener">any PLA+ </a>any<h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/212286bf-cf1d-4206-8ba1-40d3b8e90a15.jpg" alt="image">&nbsp;Mushroom Lamp Family&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/591e3f47-1d16-47f4-bbe4-0936b7d2f1b5.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/94bf8ef4-12d7-4148-aceb-69a083d8ad55.jpg">&nbsp;Printing with support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/cf919e6f-b83c-4927-9acf-26c8caa0f570.jpg">&nbsp;Printing without support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/89291392-bace-4a3b-b8e3-9fbd0593f90b.jpg">&nbsp;Printing without support

Mushroom Lamp

Renca

KYZ Design

<ul><li>1.2mm thick walls - 0.4mm nozzle will do this in 3 passes, 0.6mm nozzle will do this in 3 passes</li><li>Slightly deeper than the original bins by Zach</li><li>No magnet holes</li><li>Minor changes to internal chamfers and internal overhangs for ease of print</li></ul>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my Honeycomb Storage Wall models.

Gridfinity 1.2mm Wall Divider Bins

Gridfinity

michelem

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-04-23_b4afa61493a71.png"></figure>A VERSATILE EVERYDAY COMPANION&nbsp;Imagine having a versatile tool that effortlessly fits into your pocket, ready to tackle an array of tasks.&nbsp;Meet the SmartBits – a compact marvel that seamlessly combines multiple functions in a sleek design.&nbsp;This tool serves as both a screwdriver and a bit holder, providing easy access to 8 different bits for various applications.&nbsp;Activating the tool is a breeze – a simple slide on the exposed bar causes the bits to extend from the opposite end. The magnet effortlessly guides them back into position. Never forget it open.&nbsp;Thanks to the additional embedded magnets, each bit is securely held in place, ensuring they remain steadfast whether you&#39;re on the move or storing the SmartBits in your pocket.&nbsp;It&#39;s the ideal companion for your everyday needs, effortlessly blending convenience and functionality.&nbsp;Print Instructions:&nbsp;Support is required for both the Base and the Slider. Please verify the 3mf file with Bambu Studio if there&#39;s any uncertainty.&nbsp;Place the Slider with the magnet holes on the build plate and add regular support.&nbsp;Position the Base with the side opening on the build plate and add regular support.&nbsp;There is an alternative version of the base with flat bottom you can print with it on the build plate, but it requires support too.&nbsp;No support is needed for the Button and Lid.&nbsp;I recommend printing everything with a minimum resolution of 0.16mm.&nbsp;Bill of Materials (BOM):&nbsp;You&#39;ll need some magnets and a few screws:<ul><li>12 magnets, 5 or 6mm x 2mm</li><li>4 screws, M3 Socket Head, 8mm</li></ul>Assembly Instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-15_7862deb2dfe4.png"></figure>Start with the base and insert 2 magnets into the two rectangular holes; no glue is required there.&nbsp;Next, with a bit of glue, add 1 magnet to the Base in the slider housing. Be cautious, as this magnet is the only one that needs attention to its side, opposite to the one you put in the center hole of the slider (to be attracted).&nbsp;Now, take the Slider and glue 9 magnets on the bottom holes; again, the center one must have the same side as the magnet you put in the base slider housing.&nbsp;Insert the slider into the base, add the lid, and tighten the lid screws.&nbsp;Finally, attach the button to the slider with the last screw.&nbsp;If the slider doesn&#39;t return to its position, slightly loosen the screws.&nbsp;If you want I added also a cord endcap to be printed, look at the pictures, insert the paracord or similar in the bottom hole of the Endcap_Base make one simple knot on both ends, finally close it with the Endcap_Lid.&nbsp;Also, take a look at the <a target="_blank" href="https://makerworld.com/en/models/134027" rel="nofollow noopener">Magnetic Pocket Screwdriver</a> I crafted.&nbsp;Hope you like it!&nbsp;(Got inspired by the Bit Bar by Big Design)&nbsp;Check out my other magnetic tools for your office:&nbsp;<figure class="table" style="width: 94.97%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="text-align: center"><figure class="image image_resized" style="width: 49.2%"><a href="https://makerworld.com/en/models/146614" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_b0f041b578fc2.png"></a></figure></td><td style="text-align: center"><figure class="image image_resized" style="width: 50.26%"><a href="https://makerworld.com/en/models/143760" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_bf112a67f1d5b.png"></a></figure></td></tr></tbody></table></figure><ul><li><a target="_blank" href="https://makerworld.com/en/models/146614" rel="nofollow noopener">The magnetic cable clips</a></li><li><a target="_blank" href="https://makerworld.com/en/models/143760" rel="nofollow noopener">The magnetic ScrewGuard</a></li></ul>

SmartBits - Magnetic screwdriver bits holder

Kravinky

angrelou

Hello everyone, thank you so much for the support I received on the previous design.As a token of appreciation and to enhance your set, I created this design featuring Darth Vader&#39;s ship from Star Wars.The ship is designed to be as close to the original as possible.When you paint it, I&#39;ve added an Easter egg (I hope you find it, if not, send me a message).1.- Remember to calibrate the bed before making this design. 2.- It is designed to use a bit of force and not require glue.If you liked the design, check out my profile and subscribe, you won&#39;t regret it.&nbsp;UPDATE 05/11/2024I uploaded a new star wars ship design, which is the tie interceptor TAKE A LOOK <img class="image_resized" style="width: 33.83%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000223450/design/2024-05-11_3d019ad8ab1ff.jpg">&nbsp;

Darth Vader Tie Advanced X1 Kit Card

Toys

Rilot Designs

Print flat with supports for the groove at the side.Designed from a scan of an X20V battery.

Parkside X20V ceiling tool mount

Parkside

capsel22

Convenient holder for your bits on Skadis board. Holds 25 standard size hex bits and two more on top for longer bits.Print in any material, 3 walls, top and bottom seems to work best for me.&nbsp;It's heavily inspired by <a target="_blank" href="https://www.printables.com/model/132926-ikea-skadis-hex-bit-holder" rel="nofollow noopener">https://www.printables.com/model/132926-ikea-skadis-hex-bit-holder</a> however the tolerances didn't work for me and I wanted to add storage for longer bits so I made it from scratch.