jimmyzheng22

OCDTOOLFREAK

Hold your M18 Batteries and lock them in to your Milwaukee packout system. Tough and testedYou'll need 4x #2 screws .5" long and 4x #8 screws 1" longPrinted in multiple parts to help with orientation and strength&nbsp;Thanks for the support and appreciation for my work…..as you all know printing can be expensive and creating takes time if you'd like to support me even further then buy me a coffee here….. https://www.buymeacoffee.com/ocdtoolfreak

Milwaukee 4x Battery Storage and carrier - packout ready 4x M18

packout 

Alexis_

<h3>Silicone cartridge Nozzle</h3>lighter in filament (3G)&nbsp;&nbsp;&nbsp;Print SettingsSupports: NoFilament: All

Silicone Cardridge Nozzle

Home

IndomReps

Be sure to read the different applications of the different tool holders below to make sure you are printing the correct model for your application. Please be aware that your filament brand, age, and print profile can affect the fit of your printed parts, if you have significant issues with fit consider trying a test print with a different roll or brand of filament.&nbsp;*** UPDATE 1 *** 2/14/24&nbsp;Received some feed back that the tool mounts will not work with tools that have the belt clips installed on them. I never considered this in the original design since I typically take them off my tools. I have made 2 options available so those of you that use the belt clips can still use these mounts.&nbsp;The first option I simply increased the thickness of the mount and then hollowed out the back a bit to try and keep the amount of material used down a bit. I designed it in a way that it can be printed without supports and a little bit of bridging.&nbsp;The second option is a simple spacer that is printed separately and then placed behind the original tool mount. This is a good option for those of you who have already printed the original as it has a recess in so that the original mount can sit down in to keep the screw holes aligned. I intentionally designed this to be on the tighter side for fit so mileage may vary depending on what brand you use and your filament calibration. Comment if you do have fitment issues of the spacers so I know if I need to make more updates. &nbsp;Please note I have not verified this with every Dewalt tool available.                                                        &nbsp;Tool and Battery mounts for Dewalt 20v tools&nbsp;These things are nearly universal and will fit a good amount of the Dewalt 20v tools and is universal for all 20v batteries. They are also quite strong and have no issues supporting the weight of the ½" impact drivers weight and then some.&nbsp;Attach them to whatever surface you want with two #8 screws. Tool mounts are best used as under mount but they can certainly be mounted horizontally if it suites your application. The battery mounts can be mounted in whatever orientation you want as they use the batteries locking mechanism to hold the batteries in place.&nbsp;There are 3 different print models for the tool mounts, choose which one best suits your needs.&nbsp;Dewalt Tool Holder: Base file, print these for tools that do not have the belt clips.&nbsp;Dewalt Tool Holder - Integrated Belt Clip Spacer: print these for tools that you want to consistently hang tools from that have belt clips on them. The skid plate is a bit thicker to allow clearance and I have hollowed out the back of it a bit to save on material usage. No support is needed for this print.&nbsp;Dewalt Tool Holder - Belt Clip Spacer: This is for previous users who printed the original and would like to be able to able to mount their tools that have belt clips, or users that want a more modular function.&nbsp;I've printed these in normal PLA and didn't have any strength issues but you can use PETG or Pro PLA if you want. If you want to use these in a work truck or something that can get really hot in warm weather you should probably use ABS otherwise its probably overkill.&nbsp;Default profile uses .2 layer height but bump it up for a faster print as layer height really doesn't matter for these. I've even printed these on ludicrous speed and had them still fit fine.

DeWalt 20V - Tool and Battery Mounts

DeWalt 

ByteSlinger

Holds 10x hex keys and is designed for sizes 10, 8, 6, 5.5, 4, 3, 2.5, 2, & 1.5 I've included two versions of this design, one with and one without the hex numbering on the front.&nbsp;<figure class="image image_resized" style="width:50%;"><a href="https://www.buymeacoffee.com/JoshForwood" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/177343/2023-11-16_mg1cg7m6uoej.png"></a></figure>I hope you enjoy printing and using my design. To help me keep designing and uploading more things, you can tip me via 'Buy Me a Coffee' here: <a target="_blank" href="https://www.buymeacoffee.com/JoshForwood" rel="nofollow noopener">https://www.buymeacoffee.com/JoshForwood</a>&nbsp;If you're after other Skadis mounts, I've made a collection of <a target="_blank" href="https://makerworld.com/en/u/2704005013/collections/88851" rel="nofollow noopener">my Ikea SKÅDIS designs here</a>.

Hex key holder for Ikea SKÅDIS

ikea

historicc

A battery holder for an Ikea Skadis pegboard.

Ryobi battery holder for Ikea skadis

ryobi

LUX3D

Tappo universale per pneumatico / Universal tire cap

valvola universale pneumatico 

Byrd Anthony

I wanted to come up with a modular way to organize my sockets. I have a significantly larger selection of metric over sae sockets.&nbsp;All the things I found online were giants kits that left me with a lot of empty space and took up room.&nbsp;Most also just sat on the drawer and did not hold its place when the drawer was opened or closed.&nbsp;This design has magnets on the bottom:&nbsp;<a target="_blank" href="https://www.amazon.com/Magners-Ceramic-Industrial-Refrigerator-Projects/dp/B0B65JRFB3/ref=sr_1_1?crid=23GG2TA8B0XXG&dib=eyJ2IjoiMSJ9.XWyshWpGhZ9dRxjXHQhvY8asEVUM0qhYmr9Ae2RrWf-89KkbI3f0opTVdzRzevoYdEX4oLqQjx9dDFkqVHurpqkrWlhGgMOsLucXJ_aM5llTXfoevga0ZK9VxM_GRQNQFU0f6qiPZCUDRrqT4z4hf_Te90mgvHaHxS_zYsNLx8NWgLyZVO_MJdVu8Gyx4HvO.5zz0hcHlaB-zckvlXwI5OLGqFYy_5PsXrAi2cGhSyPc&dib_tag=se&keywords=anpro%2B120%2Bpcs&qid=1705849738&sprefix=anpro%2B120%2Bpcs%2Caps%2C78&sr=8-1&th=1" rel="nofollow noopener">Amazon.com: 120 Pcs Magners for Crafts,18mm(0.709 inch) Strong Ceramic Industrial Magnets,Tiny Flat Ferrite Dics Magneys for Refrigerator,DIY,Science Projects & School Crafts : Industrial & Scientific</a>&nbsp;The magnets hold the organizer to the drawer bottom, while also keeping the sockets nice and snug in place.&nbsp;Since it is modular, you can print as many or as little as you want to fulfill your socket set.&nbsp;How I typically use it, is by keeping them all organized in the drawer. Then when I go to work on a project, I will utilize a smaller version that I can grab the essentials that I need and bring them to the space and magnet them into place near me. Makes it easier then setting the loose sockets on the floor, or in a magnet bowl / silicone mat.&nbsp;I printed them with 3 walls and 100% infill. Personally they felt nice and sturdy at those settings for me, but you can set that to whatever you feel is best. I personally liked the full feel of it.

3/8 Socket Modular Organization

cars

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon.</h3>&nbsp;<h3>I am here to introduce you, retractable dragon wand! I made this design for Makerworld dragon contest (3/5). I think it will be a great addition Ornaments and toy for kids for new Dragon year. </h3>&nbsp;<h3>Best wishes to you all! 新年快乐.</h3>&nbsp;This wand takes me a while to design and tests. It takes around 2h33m to print and cost right around 50g filaments.The retractable part is not super rigid, it's by design, I did not put a lot of parameter in there, consider this will most gives to kids to play. So rather it break than hurt somebody.&nbsp;<h2>Update:</h2><h3>v1.5 (1/13/24) - Fix internal parts geometeric issue. (tested) It only applys on P & X Series profile.</h3>Printing profile for P & X Series have found geometric issues on inner parts. Which only occurs when selecting P&X series printers, A1 and A1mini profile doesn't have this issue. Internal parts have been redo. Profile for a1 mini, A1 have remained as v1.4 since it is working correctly.&nbsp;&nbsp;<h2>Detail display:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_161fe41bfd6c.gif"></figure>&nbsp;&nbsp;<h3>My other wand design: </h3>Loong Wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-16_55943d4f3e579.jpg"></figure>&nbsp;Harry Potter Wand: <a target="_blank" href="https://makerworld.com/en/models/68778#profileId-72937" rel="nofollow noopener">https://makerworld.com/en/models/68778#profileId-72937</a> <figure class="image image_resized" style="width:69.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_db6b2ce5b060b.jpg"></figure>&nbsp;<h2>Instruction:</h2>I put very large size of brim on all my printing profile, with 0mm gap to ensure the printing success rate. Since this model is a bit challenge to print.You will required to do some post work of removing brim off. It should be very simple. I have increased gap on first layer from design, so it is tight tolerance, but not super tight.&nbsp;&nbsp;<h2>Materials:</h2>If you are printing with some high shrinkage rate filaments, like some of the silk filament. Due to the sinkage rate different. Your part might slide out or break very easily. So, use some good filaments.&nbsp;<h2>Design:</h2>Let's talk about a little bit of design. The retractable mechanism is very simple, the inner piece is interlocking with outter pieces.<figure class="image image_resized" style="width:24.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_651c54592313e.png"></figure>Style is more challenging<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_37b064643dfb6.png"></figure>Adding more details.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_d16c3620c7aab.png"></figure><h2>Printing suggestions:</h2>This is a tall object with very small contact area on first layer. It is challenge to print. It will print without brims, but it fail very easily that way. If you are slicing the model yourself, make sure you add brims, and set brim gap to 0mm. Also increase the first layer thickness.Or, just use those profile that I put there. It all have been tested and confirm works.&nbsp;&nbsp;&nbsp;

Dragon Wand (Retractable) v1.5

random 

KubiV_

Attach Ski Poles together for better transport

Ski Poles Clip

daclasen

This is a Remix of <a href="https://www.printables.com/model/63026-print-in-place-customizable-cases-for-button-type-" rel="nofollow">Print-in-Place, Customizable Cases for Button-type Batteries</a> made by <a href="https://www.printables.com/social/48520-fuchsr/about" rel="nofollow">fuchsr</a> that will fit 10 CR2430 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)

Print-in-Place Case for CR2430 Batteries

Battery

TmnRsmn

A stand I made for my joy cons and the strap part, to store them in an aesthetic and efficient way. Choose between options for one, two or three pairs. They slide in from the top for secure storage. No supports, etc. needed.

Nintendo Switch Joy con stand

Nintendo 

Jan 3D

It is a deburring tool case, the spare blades can be stored in the side compartment and an additional magnetic lid prevents them from falling out. Other small parts can also be stored in the other two compartments. The tool case has a print-in-place hinge and holds together perfectly thanks to four magnets so that the case cannot open on its own. The deburrer is held in place by four small curves in the recess provided. I used 6x2 magnets for the project; a total of 8 magnets are needed for the case. The printing time is approx. 2.30 minutes. Have fun Printing!

Deburring Tool Case

3d Printing 

NotForEveryone

This is a screw on oil funnel for the FA20 engine in the 2015+ Subaru WRX. It also works on a 1997 JDM ej20k so this very likely works on any Subaru engine out there.&nbsp;Just take the cap off and this fits into the oil filler neck. This funnel is extra thick and should last a long time and be tough to break. Maybe the straw helps maybe it doesn't but it cannot hurt having a dedicated place for air to escape.&nbsp;I have provided 2 models here. The first one has a single straw to allow air to flow up and back out of the engine to aid in filling oil. This was the whole idea behind making this funnel in the first place.&nbsp;The second model takes this principal and turns it up to 11(okay, technically 6) because if one air pipe is good then 5 more has to be better, right? Totally.

Subaru FA20 & EJ Oil Funnel

Oil Funnel 

nathanwilliams415

Reversible cupholder insert for slim RedBull sized cans while keeping the slot available for normal sized drinks too!Have not seen this style before so decided to make my own. Designed for a Tacoma, but will fit other cupholders with similar diameter at the bottom (72mm minimum).  Included original file if you need to scale it.&nbsp;I thrive off seeing your makes.&nbsp;If you found value in this and liked the original idea, please consider leaving a boost!

Reversible Cupholder Insert for Slim Cans

Tacoma 

IchWar-Nivek

This CAD design offers a versatile solution for your gas cylinder handling needs. With the option to equip it with magnets of various sizes (6x1.5mm, 6x2mm, 6x3mm, or 10x2mm), you can securely store it on your gas cylinder, ensuring you never have to search for it when it's time to fire up the grill.&nbsp;The design is optimized for quick and easy 3D printing, making it accessible to a wide range of users. Its robust construction ensures durability and long-lasting performance, providing you with a reliable tool for your gas cylinder needs. Download the design for free and enjoy the convenience of a well-organized grilling experience.

Propane Key - Gas Regulator key / wrench 2 in 1 - magnetic  

Camping

inksterexpress

Use these to store fishing reels at home. Designed for 500-2500 size reels.&nbsp;