Came out great! Printed in BambuLab PETG HF lime green. The one issue I am having is that the last piece on the end doesn’t want to slide out… I tried taking a knife in there too loosen it up, but the material that is stuck seems to be too far down. Anyone experience this or figure it out? I guess I just don’t have a knife that is narrow enough to get down there. EDIT: the top piece was partially loose already. I figured since all of the pieces can also slide backwards, I could also push it down inwards back into the sword. I took a dull narrow object and did that and it worked!

Printed a few in white PLA and they are surprisingly sturdy. I managed to screw them into a wall stud so I imagine my guitars aren’t falling any time soon. For fenders or other guitars with asymmetrical headstocks where it meets the neck, you’ll have to mount it on a slight angle, like i did.

This design made a harsh winter a little easier this year with our little one. Plus, it was super satisfying to print and assemble! Printed in Polymaker PETG in hopes of it being a bit better suited for the outdoors, compared to PLA. I imagine this would fit most stroller wheel sizes, as we had no issues getting it to fit securely on.

I have printed many of these now in various sizes and they all turned out great. Printed in both white and black Overture PLA on the P1S. they can now be found around my house in numerous locations. I found that it works well for (and properly holds - unlike many other designs) various cable sizes, up to and including a 1/4 inch instrument cable.

it printed nicely in Elegoo PLA Black. I appreciate the spring inside that stops the lock from simply opening with a light touch like some designs do.