jhw4x3

Ben Brandt

If you've ever needed to re-thread a drawstring for a hoodie, you know it can be tricky. After struggling with this once I designed these drawstring threader needles to make the process much easier. Simply pass the end of the string through both holes as shown and pull tight. Usually this is enough, but if needed you can tie a knot. Included are three different widths of needle (5mm, 7mm, and 9mm) to fit through different size openings.&nbsp;Printing tips: these threaders are more useful if they can be a little flexible and standard PLA works fine for this. I prefer to print them with a solid infill so you don't have infill structures breaking as the item is flexed. For better printing speed, strength, and flexibility, I recommend concentric infill all the way through. This way the needles have long strands of filament along the entire length of the part, less prone to breaking.

Drawstring Threader Needles for Hoodies/Shorts/etc

Tools

Calzune

<h2>This is a 3 part silhouette box to hang on the wall or place on a desk etc.</h2>Dimensions: 234*234x48mm<ul><li>The box needs support on the two holes show like the picture below</li><li>The box fits on a 256mm plate but you need to adjust the placement manually, I placed it on: X 125.80 Y130.66 Z 24.22</li><li>I printed it at 0.2mm layerheight.</li></ul>For my print I used: <ul><li>SUNLU Pla+ ORANGE</li><li>ELEGOO Pla BLACK</li><li>Esun Pla-lite RED</li></ul><h4>I hope you like it! =)</h4><img src="https://makerworld.bblmw.com/makerworld/draft/583825/2024-02-24_1dc0ba2bb5563.jpg">

Dragonball Silhouette Box (NO AMS NEEDED)

gifts

OscarTheCat

My first attempt to design a yarnbowl&nbsp;tree prescaled sizes at 15 / 17 & 20 cm &nbsp;printed mine at 13cm.&nbsp;feel free to scale it as you like.

Yarn Bowl

rando 

codebender

A simple side spool holder for the Bambu Lab X1 Carbon&nbsp;Update: Created a small bracket to hold the Bambu 4-in-1 PTFE Adapter, which fits nicely on the side spool holder. <figure class="image image_resized" style="width:42.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/634276/2024-03-04_0977b2642fbe7.png"></figure>Find it here: <a target="_blank" href="https://makerworld.com/en/models/205887" rel="nofollow noopener">https://makerworld.com/en/models/205887</a>&nbsp;Updated PLA and PETG Profiles!   This version includes the following updates:     •    Left hand threads for spindle holders - should avoid any chance of unscrewing while in use.     •    Better thread fit - Threads were a bit tight, this fixes that.     •    Sacrificial layer to help with screw hole ledge.     •    Smoothed edges on basic spindle holder.     •    Multiple build plates for easier printing the parts you need with different settings. &nbsp;I've made two spindle holders for it. One fits the Bambu Labs Green AMS Spindle holder, and the second fits the basic spindle holder that comes with your X1 Carbon.&nbsp;The spindle which holds the AMS Spool holder is nice as it incorporates a nice click mechanism to hold it on as well as it incorporates the auto rewind spring mechanism of the AMS spool holders. This works very well.&nbsp;This is the one you need - ensure you get the Green one: https://ca.store.bambulab.com/products/ams-lite-rotary-spool-holder?variant=44244705378544&nbsp;You can choose which spindle holder you like and simply screw it onto the main base.&nbsp;This design uses a PC4-M10 fitting for the filament. This is what I bought: https://www.amazon.ca/gp/product/B07L8R4SMG&nbsp;The spool holder screws onto the existing Bambu Lab screw locations and uses four M3x12mm Hex bolts.&nbsp;If you use the basic spool holder attachment, it also uses two M3x12mm bolts and two M3 nuts.&nbsp;Update: jmaestrale has confirmed this works with the P1S as well. Print settings:The spool holder is designed to print without any supports!I've printed this in PLA and it works well for my use.The components are printed with different settings appropriate for their function.&nbsp;Main Component: Infill: 15% Wall loops: 2Layer Height: 0.2mm&nbsp;AMS Spindle Holder: Infill: 40% Wall loops: 2Layer Height: 0.2mm&nbsp;Basic Spindle Holder: Infill: 40% Wall loops: 2Layer Height: 0.2mm&nbsp;Instructions:Print one of the base model. Then print one of either the basic spool adapter or the AMS spool adapter. Screw in the spool adapter onto the base plate, then screw in the M10 fitting into the base plate and attach a length of filament tubing and attach to the intake on the back of the printer - note you will need to unplug the tubing from the AMS if you are using an AMS while printing from the side spool holder.

Bambu Labs X1 Carbon / P1S Side Mount Spool Holder

printer improvement

FarOutRide

This is an horizontal caliper holder for Ikea's Skadis pegboard. <figure class="image image_resized" style="width:43.8%;"><img src="https://makerworld.bblmw.com/makerworld/user/1025644419/draft/2023-09-25_6d62a648976fd.jpg"></figure>Compatible with:<ul><li>Neiko 6in Caliper (01407A). My favorite and a best seller on <a target="_blank" href="https://amzn.to/3tdVi8Z" rel="nofollow noopener">Amazon</a> (affiliate link). </li><li>(I'm a big fan of Neiko tools!)</li></ul>&nbsp;This print profile works well (although any other should work too):<ul><li>PLA</li><li>0.12mm layers.</li><li>2 walls.</li><li>15% infill.</li></ul>&nbsp;Print with normal supports for the feet only:<figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/user/1025644419/draft/2023-09-25_e6564fd368b69.jpg"></figure>&nbsp;