jgeater

Timo

neue schnellere Version gibt es hier:<a target="_blank" href="https://makerworld.com/en/models/472740#profileId-382628" rel="nofollow noopener">https://makerworld.com/en/models/472740#profileId-382628</a> &nbsp;Dose für Silica-Gel-Kugeln.  45 mm Durchmesser, Höhe 18 mm. Mit 2,6 mm Löchern. Wandstärke 1 mm, 7,3 g Filament. Der Deckel wird mit einem Gewinde geschlossen.V2: Unterteil wurde überarbeitet - Besserer Übergang zum Gewinde (Siehe Schnittbild).***********************************new faster version is available here:<a target="_blank" href="https://makerworld.com/en/models/472740#profileId-382628" rel="nofollow noopener">https://makerworld.com/en/models/472740#profileId-382628</a> &nbsp;Tin for silica gel balls.  45 mm diameter, height 18 mm. With 2.6 mm holes. Wall thickness 1 mm, 7.3 g filament. The lid is closed with a thread.V2: Lower part has been revised - better transition to the thread (see sectional view).

Round silica gel box with thread V2

Tools

SeaSpotter

I modified the original Decontaminator to use with the Bambulab A1 mini silicon brush, more reliable and robust than the brass brushes.I also modified the bucket to be smaller on the inner side to mount different Wago mounts.All you need is all print files (print in ASA or ABS best as it is close to the heatbed). The only thing you need to modify is the "spacer" to your desired size.I added 1, 2 and 3mm spacers but you can modify in your slicer to your desired needed size.For my Voron 2.4 the intermediate plate needs to be 2mm, but just adjust the height of this plate to your printer needs in your Slicer.BOM:4x M3x8 SHCS2x M3 T-Nuts4x 6x3mm magnets2x M3 Threaded Insert (M3x5x4 / Voron type)1x Bambulab A1 mini nozzle wiper (<a href="https://eu.store.bambulab.com/de/collections/accessories-for-a1-mini/products/heatbed-nozzle-wiper-a1-mini" rel="nofollow">https://eu.store.bambulab.com/de/collections/accessories-for-a1-mini/products/heatbed-nozzle-wiper-a1-mini</a>)

Voron 2.4 Purge Bucket Silicon Brush Wiper

Voron Parts

3DomSculpts

Please note, this is for personal use only unless you are a member of my Thangs3D All Access Tier, or part of my Patreon. Anyone found to be selling reproductions or the digital file without permission, will be reported. &nbsp;The Stand for the bust is available <a target="_blank" href="https://than.gs/m/1063509" rel="nofollow noopener">here</a> I model from a position of homelessness, hoping to change my situation through my creativity.Please drop me a like if you download.Modeled in ZbrushIf you would like to sell physical prints of my work, support me, and help me toward securing a home, please join my <a target="_blank" href="https://www.patreon.com/3DomSculpts" rel="nofollow noopener">Patreon</a>.

The Ghoul - Fallout TV Series 

Bust

qiqiji

<h3>Minimalist Desktop Drawer</h3>Fully Configurable, place on your desks, dressers, shelfs, always suits your needs.&nbsp;Multiple Frames can be endlessly connected, horizontally, vertically, or both ways.5 Different Drawers, 2 Optional Cabinet Bases, 2 size of Hooks and more to come.&nbsp;Frame Size: 129x123x204mmDraws Size: 124.8x45.5x203mm<h3>Print guideline:</h3><ul><li>Print one or more frames, you can use 0.24 layer height to reduce print time.</li><li>Print numbers of draws you like, you can print 2 draws in one plate.</li><li>Print cabinet bases (optional) and joints for final assemble.</li><li>Try different color combinations to show off your personality.</li><li>For certain materials, it seems like a good idea to add a brim out of caution.</li></ul>PS: Due to different materials and printers, the tolerances may vary slightly. If the frame assembly is getting too tight, you can lightly sand the parts as needed. In my personal opinion, it&#39;s better to be tight than loose.&nbsp;<h3>极简设计的桌面抽屉</h3>完全可定制化，框架可以横向或纵向或组合拼接，以适应各种不规则空间，五种不同内分割的抽屉，可满足不同需求。

Modular Desk Drawer (Stackable Desktop Organizer)

Storage

Riffcat

This Headset Hanger fits desks from a height of 5mm to 40mm. Use the Long screw for desks thinner than 18mm.I printed it with a 0.4mm nozzle and a layer height of 0.2mm with PLA on My Ender 3 which worked well for me. Also, I wouldn't use supports as they may mess up the threads and the threads print well without them. I would recommend printing this with more infill than standard prints for rigidity. Some people may need to do some trimming or sanding to fit the thread into the hanger as it is a tight fit but it is designed like that so it is secure. The maximum headset width is 4cm which is enough to fit most headsets like my SteelSeries Artis 1. Also, I would print the threads without supports as they are hard to remove and it prints just fine without them. I have also shared this design on Printables.com for convenience <a target="_blank" href="https://www.printables.com/model/361953-headset-hanger-v1" rel="nofollow noopener">https://www.printables.com/model/361953-headset-hanger-v1</a>. By the way if you can see any issues with this design or anything that can be improved then please tell me your ideas in the comments section as I read all of the comments on my designs. Thank You.UPDATE (V1.5) I have kept the thread the same so that if you were struggling with the screw before, you can keep the thread and print a new screw. I have adjusted the tolerance on the screw and have moved it by 0.1mm which will make a huge difference while still keeping snug. I have shown some images of the changes I made to the screw which may be helpful to some people. I have also added the CAD fusion files to this design with both new screws so people can make remakes of this design. Thank you for the support and feedback.

Headset Hanger V1.5

Office

marpicio7

Flexi Dragon

Flex toys

soukup273

A great idea for a international women&#39;s day gift!&nbsp;a beautiful rose with a stem that is suitable for decoration or as a gift. print the parts separately. print the flower in vase/spiral mode.&nbsp;it is perfect for decorating the table at Christmas dinner, or also for decoration at the approaching New Year&#39;s Eve party! suitable as a decoration for any other party or birthday party :)<h2>!assembly requires glue, ideally instant glue or other plastic glue!</h2>&nbsp;It looks beautiful as a bouquet in combination with my other models!with Tulip:<a target="_blank" href="https://makerworld.com/de/models/94713#profileId-101302" rel="nofollow noopener">https://makerworld.com/de/models/94713#profileId-101302</a>&nbsp;with Rose:<a target="_blank" href="https://makerworld.com/de/models/89698#profileId-96027" rel="nofollow noopener">https://makerworld.com/de/models/89698#profileId-96027</a>&nbsp;with Deffodil:<a target="_blank" href="https://makerworld.com/de/models/94751#profileId-101334" rel="nofollow noopener">https://makerworld.com/de/models/94751#profileId-101334</a>&nbsp;&nbsp;the model is completely a remake from the beginning based on the models created by lytta and Grafit&nbsp;

Beautiful Rose With Stem  - mother’s day Gift

Toys

AU3D

This tool serves as a compact assistant for consistently trimming the PTFE tube to the suggested length for the AMS Saver v5m. It is designed to adhere to the recommendation of maintaining a tube length of 100mm, ensuring optimal performance every time. To prevent the tube from getting stuck, straighten it thoroughly before inserting it. If the tube becomes lodged inside, assist by gently pushing it with a small object, such as a piece of filament or a paperclip, from the far end toward the opening.<h3>Printing Instructions</h3>Ensure that your print bed is thoroughly cleaned. Neglecting this step could lead to issues with warping.<h3>Update</h3>15.01.2024: The pushback mechanism can now be operated without external tools. The PTFE hose can be pushed back with one finger.25.12.2023: The pushback mechanism has been relocated to the top, eliminating the need to probe into the PTFE tube. This modification makes the new pushback slot more user-friendly and accessible. Please note that third-party print profiles may not always be current or updated.

AMS Saver V5 PTFE Cutter

x1c parts

addohm

A raspberry pi 5 case built for the BigTreeTech TFT50 touchscreen, vented, access to DSI and PCIe ribbon cables, access to GPIO, fits the official active cooling. EARLY Pi5 RECIPIENTS: Please give feedback as I won't be able to aquire a new pi for at least a couple weeks.Update 24Oct23: Changed snap between USB ports to be a solid flat surface as the snap fit could potentially break there with too much force.