jessedoyle05

Volker88

There are 2 models. One with a plain body and one with a step&nbsp;Dimensions: 240mm x 130 mm

Kitchen Sponge Holder

home

Nils N3DP

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Jade White Transmission Distance: 5!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Lemon Yellow At layer #11 (0.88mm) swap to Orange At layer #21 (1.76mm) swap to Jade White for the rest.

[Hueforge] Porsche 

gifts

HRM_Studios

The perfect printable bird feeder (dice tower) for Wingspan! Fits in the box. Sounds great.&nbsp;Original: <a target="_blank" href="https://www.thingiverse.com/Strider1" rel="nofollow noopener">Strider1</a> Wingspan Boardgame - Bird FeederRemix 1: <a target="_blank" href="https://www.printables.com/@Drakka01" rel="nofollow noopener">Drakka01</a> Wingspan Assembled Bird Feeder Remix&nbsp;My double remix changes:<ul><li>I removed the need for the fourth piece where the dice are fed. I found this to have a very tight tolerance and was likely to stick out in the back. I realized it wasn&#39;t necessary when I added an internal slope and smoothed the edge.</li><li>I wrote WINGSPAN on the back.</li><li>I found the tray to be a bit tight and made it just enough wider to accommodate the grove in the main body.</li><li>I also made that grove a tiny bit larger. In the last picture you can see how I&#39;ve eliminated the need for the 4th piece.</li></ul>Please follow my profile here and my <a target="_blank" href="https://www.instagram.com/HRM_Studios" rel="nofollow noopener">Instagram </a>@HRM_Studios.If you enjoy my work please consider <a target="_blank" href="https://www.paypal.com/paypalme/HRMStudios" rel="nofollow noopener">sending me a tip</a> and/or a boost. Thank you!Happy printing!

Wingspan Assembled Bird Feeder Double Remix

board game

squinn

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand.  This is a fully printable design, so no other hardware is required.  The clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, and can be installed facing either direction.&nbsp;All STLs are oriented as they should be for optimum printing, which have been designed with the layer lines in mind to result in a strong print (and no supports or brim should be required).

Adjustable PCB Holder Tool

Work

Ruvim KUB

I do a lot of printing of small devices and for them I have a lot of small nuts, bolts and different modules.My practice has shown that it is more convenient and compact when the container is placed on the container.I hope you will find this organizer useful.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/115716#profileId-124378" rel="nofollow noopener">There are also organizers with a height of 16mm</a><a target="_blank" href="https://makerworld.com/en/models/149624#profileId-163286" rel="nofollow noopener">There are also organizers with a height of 25mm</a><a target="_blank" href="https://makerworld.com/en/models/202754#profileId-223110" rel="nofollow noopener">There are also organizers with a height of 40mm</a>&nbsp;And also I would like to tell you that I recently started a small store on <a target="_blank" href="https://www.etsy.com/shop/3dkub" rel="nofollow noopener">Etsy.com</a> here will appear instrementy and exclusive projects that will not be in the open access.<h2>My some other things:</h2><figure class="image"><a href="https://3d.ruvim.info/thingiverse" target="_blank" rel="nofollow noopener"><img src="https://3d.ruvim.info/thing.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/151492#profileId-165387" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/581784/2024-01-21_140ed1f4e28fc.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/149624#profileId-163286" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/581784/2024-01-21_c9f371a901922.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/135080#profileId-146564" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/581784/2024-01-11_f09984058f1de.jpg"></a><img src="https://3d.ruvim.info/0450.png"><a target="_blank" href="https://www.thingiverse.com/thing:4968267" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Auto-Solder-Feeder-V1.1.jpg"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4934874" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Magnetic-mount-for-Street-style-Clocks.jpg"></a> <a target="_blank" href="https://makerworld.com/ru/models/133763#profileId-145135" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Rectangular-stand-for-cotton-buds-and-disks.jpg"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4872540" rel="nofollow noopener"><img src="http://things.ruvim.info/img/phone-clip.jpg"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4860781" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Anex-sport-Min.jpg"></a> <a target="_blank" href="https://makerworld.com/ru/models/97564#profileId-104137" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Stand-for-toothpaste-V2.0.jpg"></a> <a target="_blank" href="https://makerworld.com/ru/models/105242#profileId-112325" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Stand-for-cotton-swabsticks-and-discs-V5.jpg"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4751509" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Smart-faucet-on-Arduino-(filter-resource-counter).jpg"></a> <a target="_blank" href="https://makerworld.com/ru/models/133785#profileId-145164" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Organizer-for-3D-printer.jpg"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4709801" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Acetone-Bath-on-Magnets.jpg"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4689514" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Case-for-rfid-tags.jpg"></a> <a href="Nozzle-Box.jpg" rel="nofollow"><img src="http://things.ruvim.info/img/Nozzle-Box.jpg"></a> <a target="_blank" href="https://makerworld.com/ru/models/127746#profileId-138242" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Table-Adjustment-Knob-M3.jpg" alt="Table Adjustment Knob M3"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4539243" rel="nofollow noopener"><img src="http://things.ruvim.info/img/PCB-Etching-Tray.jpg" alt="PCB Etching Tray"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4495533" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Speed-Controller-220V.jpg" alt="Speed Controller 220V"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4458304" rel="nofollow noopener"><img src="http://things.ruvim.info/img/M%D0%BEdular-Mini-Circular.jpg" alt="Mоdular Mini Circular"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4383145" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Clock,-Counter-Subscribers..jpg" alt="Clock, Counter Subscribers."></a> <a target="_blank" href="https://www.thingiverse.com/thing:4361811" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Compass---Plotter.jpg" alt="Compass - Plotter"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4356203" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Phone-Clip..jpg" alt="Phone Clip."></a> <a target="_blank" href="https://www.thingiverse.com/thing:4327360" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Phone-Stand.jpg" alt="Phone Stand"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4317738" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Mini-Grinder.jpg" alt="Mini Grinder"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4304240" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Disc-Sander-Duo.-D50mm,-D75mm.jpg" alt="Disc Sander Duo. D50mm, D75mm"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4265679" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Lifting-Gear-For-Automatic-Nozzle-Cleaner.jpg" alt="Lifting Gear For Automatic Nozzle Cleaner"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4216312" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Mini-electric-lighter.jpg" alt="Mini electric lighter"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4212059" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Stand-for-toothpaste.jpg" alt="Stand for toothpaste"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4123230" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Camera-Weight-for-Diving.jpg" alt="Camera Weight for Diving"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4099456" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Electric-lighter.jpg" alt="Electric lighter"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4086763" rel="nofollow noopener"><img src="http://things.ruvim.info/img/The-best-soldering-iron-stand.jpg" alt="The best soldering iron stand"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4056390" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Flux-stand.jpg" alt="Flux stand"></a> <a target="_blank" href="https://www.thingiverse.com/thing:4084435" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Mobile-Hard-Drive:-2.5-Inch-USB-3.0-SATA.jpg"></a> <a target="_blank" href="https://makerworld.com/ru/models/118219#profileId-127104" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Magnetic-plate-for-little-things.jpg" alt="Magnetic plate for little things"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3970160" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Clamp-for-firmware-controllers-6-pins.jpg" alt="Clamp for firmware controllers 6 pins"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3976187" rel="nofollow noopener"><img src="http://things.ruvim.info/img/2-relays-box-or-ESP-01-with-relay.jpg" alt="2 relays box or ESP-01 with relay"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3970750" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Case-for-Ndemcu.jpg" alt="Case for Ndemcu"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3942946" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Alphabet-for-children.-A-B-C-D-E.jpg" alt="Alphabet for children. A B C D E"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3946878" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Alphabet-for-children.-F-G-H-I-J.jpg" alt="Alphabet for children. F G H I J"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3974764" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Alphabet-for-children.-K-L-M-N-O.jpg" alt="Alphabet for children. K L M N O"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3989549" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Alphabet-for-children.-P-Q-R-S-T.jpg" alt="Alphabet for children. P Q R S T"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3991721" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Alphabet-for-children.-U-V-W-X-Y-Z.jpg" alt="Alphabet for children. U V W X Y Z "></a> <a target="_blank" href="https://www.thingiverse.com/thing:3912631" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Replacement-SD-Card-Case.jpg" alt="Replacement SD Card Case"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3914719" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Solder-feeder.jpg" alt="Solder feeder"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3851649" rel="nofollow noopener"><img src="http://things.ruvim.info/img/USBasb-case.jpg" alt="USBasb case"></a> <a target="_blank" href="https://www.thingiverse.com/thing:3845727" rel="nofollow noopener"><img src="http://things.ruvim.info/img/Magnet-stick.jpg" alt="Magnet stick"></a>&nbsp;&nbsp;

Organizer for small things (16mm Height)

organization

JDJDJD

<h2>Meet The Shifty!</h2>&nbsp;The Shifty allows you to quickly and easily center your build plate on Bambu Lab 3D Printers (X1C/P1S/P1P Style).&nbsp;This is the first and original Build Plate Guide ever to be shared on MakerWorld.&nbsp;As a brand new product, I&#39;ve meticulously designed the Shifty to make your life easier, every time you insert your build plate.&nbsp;<h3>How it works:</h3>&nbsp;The Shifty build plate guide increases the contact area of the built-in plate guides. This means you have more room for error when sliding your plate into place.&nbsp;It also eliminates cases where the plate skips over the existing guides, or lands on top of them uncentered and un-level which can cause failed prints.&nbsp;The increased guide height also allows you to slide the plate in at a greater angle, which is more comfortable and minimizes instances when the plate clamps down before it&#39;s properly positioned.&nbsp;<h3>How to use:</h3>&nbsp;Slide your plate in like normal, but aim the back left corner of your plate towards the Shifty. Once you make contact it will take over and shift your plate perfectly into place.&nbsp;The Shifty is low profile and clips to the back left corner of your bed, out of the way from activity.&nbsp;<h3>Installation:</h3>&nbsp;Step 1 - Connect The Front:&nbsp;Insert the front tab into the notch located at the front of the built-in guides.&nbsp;Step 2 - First Click:&nbsp;Wrap it around towards the back and press so it “clicks” into place. (see video below).&nbsp;Step 3 - Second Click ←- Double Check This One:&nbsp;After you hear the first click as shown in the video, you may have to press down on rear hook (right side of back edge) to seat it properly into place. This is the second click. I recommend pressing down in the back even if you think you have it in place just to make sure.&nbsp;When properly installed, the Shifty will be very snug, perfectly level, and without distortion.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000083480/design/2023-12-04_8cba772444acc.gif"></figure>&nbsp;&nbsp;If you have any questions, feel free to direct message me.&nbsp;&nbsp;<h3>Tips and Notes:</h3><ul><li>The Shifty is designed to look cool and print beautifully. The supports are custom tailored and break away easily in one piece with a simple twist for most materials. For some materials, you can simply twist counterclockwise while it&#39;s still on the plate and it will cleanly break away.</li><li>To replace or remove, access it from the bottom side of the bed and press backwards on the back edge until it unclips.</li><li>When properly installed, the Shifty will be very snug and perfectly level. If it isn’t, study it&#39;s shape and check the back edge, you may need to push it down on the back edge so it snaps into place.</li><li>If you print a lot of high-temp materials, consider making a Shifty in PETG, ASA or ABS. These profiles are tested and also available.</li><li>At this time I&#39;m releasing the left side only. I have a right side model completed, but am not releasing it for now since the left-only approach works well and keeps the Shifty away from the back right purge strip activity. Feel free to mirror a right side in Bambu Studio for your own use, but please don&#39;t upload profiles with the right side mirrored at this time.</li></ul>

The Shifty - Build Plate Guide

printer upgrades

Willmck

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231015/2023-12-02_04dcdab582ed1.gif"></figure>&nbsp;<h2>Merry Christmas!</h2>This fully functional train prints without any supports on any of the parts! All parts are fully 3D printed except the motor, switch, and battery holder. All other, wheels, axles, tracks, etc., are snap-fit together. There is a common train cart base for the regular cart top and caboose. This creates an opportunity for anyone who desires to design their own cart topper.&nbsp;For Part name references, refer to the “Train Key” PDF below<h2>Assembly:</h2><h3>Train Engine:</h3><h4>3D Printed Components</h4><ul><li>Main body x1</li><li>Drive wheels x2</li><li>Follower wheels x4</li><li>Engine Wheel Pins x4</li><li>Coupling Rods x2</li><li>Smokestack x1</li><li>Cover x1</li></ul><h4>Electric Components</h4><ul><li>Geared motor x1</li><li>Switch x1</li><li>Duel AA Battery holder x1</li></ul>Here is the Amazon link to the bundle that I bought: <a target="_blank" href="https://a.co/d/jm5NdyH" rel="nofollow noopener">https://a.co/d/jm5NdyH</a>&nbsp;(This one had a lot of extra parts, and these components are fairly standard, so feel free to source from other places.&nbsp;Assembly Steps:<figure class="image image_resized image-style-side" style="width:22.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/231015/2023-12-03_f7e47fc16ef6.jpg"></figure><ol><li>Fit the motor into the train housing by first sliding the back end of the motor towards the rear of the train. You will then twist the motor until one of the axle sides is poking out of the wheel hole. Push down the other side of the axle until it is locked in place.</li><li>Wire the switch, motor, and battery pack by sodering one of the wires straight to the motor and then adding the switch in between the second wire and the motor. MAKE SURE to test the spinning direction before soldering. (The switch will slot into the back of the train; you will want to route the wires through the channel before soldering in place.</li><li>Add the drive wheels by pushing them onto the motor drive shafts</li><li>Push the wheel pins through the follower wheels (ensure they spin freely.) Push pins/wheels into the four corner holes in the train</li><li>Snap on each coupling rod onto both sides; you will need to rotate the wheels into matching orientations for everything to fit properly</li><li>Snap the battery holder in place in front of the motor</li><li>The cover will slide into place and lock when pressed firmly into the recess</li><li>Finally, fit the smokestack into the top of the cover, ensure the curvature is aligned</li></ol><h3>Cart Assembly</h3><h4>Components</h4><ul><li>Cart Platform x1</li><li>Cart Wheels x4</li><li>Cart Pins x4</li><li>Cart top(Regular or caboose) x1</li></ul><h4>Assembly Steps:</h4><ol><li>Place the wheels between the posts on the bottom half of the cart platform; ensure the ridge of the wheels is on the inside</li><li>Insert the cart pins into the platform wheel slot, through the wheel, and snap them in place into the platform</li><li>Make sure the wheels rotate freely; otherwise, pull the pin out and sand the pin slightly</li><li>You can now place the cart tops onto the base, this base will work with the caboose and regular carts</li><li>The caboose will have a separate middle “collar” piece that will snap into the caboose's body and then into the cart platform. This was done in order to print without any supports</li></ol><h3>Track Assembly</h3>The track snaps together in a vertical fashion. Hold one piece over the other and align the circles, then push down. There are only two types of track pieces. The first is a standard straight piece, and the other is a 22.5-degree curved piece. You can snap these curved pieces together in either direction to get the train to turn at different degrees.&nbsp;<h3>Building your own cart top!</h3>Dimensions of cart base:62mmx100mm outer rim&nbsp;<ul><li>The lip offset 4mm from the outer rim, and it is 2mm wide</li><li>This slot is 3mm deep</li><li>Build something cool; happy printing!</li></ul>*NOTE: If you need more traction, add more weight to the train engine. (I added an extra 2 AA batteries)