jenhegman

michaelclaw

The stand was created for Big Bricks 6:1 scale figures and l-ego figurines. I haven&#39;t modeled before so this is my first project, both the BigBrick and l-ego figurine should snap in and wont fall out of the stand. I&#39;m open to suggestions/improvements!The 6:1 scale is based on the models at the link below!https://thangs.com/designer/BigBricksPrint Instructions:0.16 Layer Height15% Infill

Big Brick Stand

Lego

mrayner

Fortnite victory crown trophysplit for easy printing with minimal supports, I advise changing to manual normal supports for the trophy base where the game tag slots in for a cleaner finish.simply add gamer tag text to plate 3 in bambu studio.small amount of glue is required to join the crown to the trophy base.&nbsp;enjoy…

Fortnite victory crown trophy

Fortnite

sabberkopp

This in a Multiboard 8x8 tile with 45° angel to perfectly fill walls with a 45° slope.

Multiboard 8x8 45° Corner

Multiboard

letsgo00

Office Priority and Task Labeling Magnets&nbsp;These magnets are designed to be used in office environments, but can also be used at home on the fridge.For each magnet you need 2 pieces of 2x10mm round magnets.&nbsp;There are several designs with several themes and colors which you can freely customize.&nbsp;If you did not find the design you are looking for you can create your own with the included blank magnet. <ul><li>Just simply add text with the slicer, 1 mm height is recommended.</li><li>Make sure the colors are right and good looking.</li><li>Hit print! That's it.</li></ul>

Office Priority Magnets

work

Gaudibursch74

I have created a storage for 5 pieces of the Nasa Chainmail Hex 4x4 tiles. I use them as a coasters for glasses and bottles to protect my tabletop from scratches.The design is slightly optimized in comparison to Image 2.

Container for 5 pcs of Nasa Chainmail Hex 4x4

Chainmail

mobiobi

Wanted to make this for a while, was interesting to work though the problems of packing moveable yet stable joints into a small space. The TPU wraps add force to the conical pins the joints rotate on.Attempts were made to minimize support requirements, but some could not be avoided. Printed at 0.2mm, 3 perimeters on 0.4mm nozzle in PLA & TPU. All held together with friction, so completely rebuild-able.If you just print the 3 Plates PLA1, PLA2, & TPU you should have everything you need, but the individual files along with a Master Step file are here too.(This is left handed because, well, I am. If you want a right hand, mirror the WristBone, Bolt, and the ThumbWeb)UPDATE - 25-03-2023: Modified the through-hole for the TPU pin for better fit and use.&nbsp;ASSEMBLY INSTRUCTIONSK, here we go, you should have these parts printed, PLA for the first pic and TPU for the second<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_p1z1otyxva48.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_pg9wnv22uu2i.jpg"></figure>After printing, <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_eqjzm7rik8jd.jpg"></figure>Next, build the fingers by laying these pieces out<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_u6ona99kbxxi.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_file03vsbeez.jpg"></figure>Slide the TPU Knuckle Wraps on(they should be tight) hold the ‘finger’ between the palms of your hands, and use two of your fingers/fingernails on each of your hands to slide the TPU into position. Make 4 of them.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_a1xt737z718s.jpg"></figure>Next, the thumb<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_1frtqqzp4z84.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_g7ucdsbs77vq.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_3vm6nt3t09ca.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_2ihv4h3fvihi.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_v1mqq8ehhjn1.jpg"></figure>Now, put the straps between the fingers on. If you have the holes cleaned out nicely, the TPU pins should be firm to get in, but stay in place. There is not a lot of room inside, so the oposite side TPU pins will contact each other inside. Because of this, install the straps at about the correct angle, as they are harder to rotate once they are both in.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_gvn15s9bl30p.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_7czy2jya73em.jpg"></figure>Slide the TKnuckle Joints and then the Thumb into place and press in. they should be firm but still a able to twist with a bit of force.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/898869326/draft/2023-08-15_ro8ksjs93aj3.jpg"></figure>

Robot Hand - Stand

just for fun

Nils N3DP

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Dark Blue At layer #9 (0.8mm) swap to Orange At layer #16 (1.36mm) swap to Lemon Yellow for the rest.

[Hueforge] Scary Halloween Pumpkin [1AMS Ready]

Halloween

Amazing STL Creator

https://amazingstlcreator.etsy.com A funny articulated plate made with our software Please take a look at the attaced documentation for more info!&nbsp;TRAILER FOR THE APP <a target="_blank" href="https://youtu.be/FlMRGmDoBtA" rel="nofollow noopener">HERE</a>

Articulated Plate - No Support - Print-In-Place

print in place

BS 3D Print

When I started 3D printing, one of the first things I designed was this LED strip installation kit for the ceiling. With these anchors, the light is emitted at 45 degrees, and can be installed in the same corner between wall and ceiling, or behind plaster or moldings, creating a rebound effect with indirect light.&nbsp;The kit is made up of a small part for straight sections, which can be screwed with a single screw. It also includes some grooves to add roughness in case you want to reinforce it with liquid adhesive. The piece is hollow so that cables can be inserted inside and thus left hidden behind the strips. In case a replacement is needed, there is a cuttable area to be able to pass the cables inside without having to completely dismantle the installation.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/255885/2023-11-21_c2122f9328b98.jpg"></figure>&nbsp;In the case of the corners, they are not designed for replacement, but yes to keep the strips tensioned, since they have more holes for fixing them with screws. There are both interior and exterior ones.&nbsp;They are also modular. If you need to make larger sections, you can fit pieces together around the interior gap.&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/255885/2023-12-11_ae63d0c1005548.jpg"></figure>&nbsp;&nbsp;These modules are designed to keep the LED strips taut and fixed at certain distances. I do not install them continuously throughout the entire installation, I only install them where I estimate that the LED strip begins to curve.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/255885/2023-12-08_92e7bb3598d098.jpg"></figure>&nbsp;<h3>08/12/2023</h3><h3>Added Kits for 5mm, 8mm and 12mm:</h3>Plate 1: First version 2x4mm and 1x10mmPlate 2: NEW 2x5mm and 1x8mmPlate 3: NEW 2x10mmPlate 4: NEW 1x8mm and 1x12mm

Anchors for installing LED strips at 45 degrees on the ceiling

LEDs

Rcrunger

Set of four coasters featuring Star Wars emblems. Designed for multicolor. I do not own the license to the Star Wars emblems and this is not intended for commercial use.

Star Wars Coasters

Coasters

nicodeimos

Ring hole: 4.8mm.Model size: 33mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a><a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">Want to sell my models? More info on my profile!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Mario mushroom keychain

Keychains

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;WARNING: Contains small parts. Not intended for children below 7 years old.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000038611/design/2023-10-10_8786f4c502dcc.jpg"></figure>A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is available for download for this mini figure model!_____________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________Easy-to-assemble, quick print, kit card of Minecraft Spider in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Print as oriented, with NO supports needed. Model comes with breakaway supports.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol>

Minecraft-inspired Spider Mini Figure Kit/Keychain

Minecraft

KYZ Design

Originally posted <a target="_blank" href="https://www.printables.com/model/463601-hsw-feet-for-freestanding-walls-honeycomb-storage-" rel="nofollow noopener">here</a>, check it out to see past makes and comments&nbsp;These feet use the Ez-V1 series clip and therefore require no screws, are designed for easy printing, and print in the strongest direction.This will work with standard HSW wall pieces but if you are just having 1 piece, see this for <a target="_blank" href="https://makerworld.com/en/models/26738#profileId-26811" rel="nofollow noopener">single wall pieces with integrated frames</a>.&nbsp;If you print the feet with a fibre filled material (I used CF-ASA) and use it with one of the 10mm thick “HD” wall pieces as shown in the pic (which I printed in ABS+), it will be a very tight fit, but will not wobble and be quite secure.&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.

HSW Feet for Freestanding Walls - Honeycomb Storage Wall

Organize & storage

bnull49

Printed with shell 0,8 and fill 15%. This is from DIEGORIPP

darth vader melted helm

Figures

Printed in TPU, but might be ok (for a while?) in less flexible filament.Printed here with a 0.3mm nozzle @ 0.15mm layers, . Others I have printed have worked well with a 0.4mm nozzle.21.5mm inside, 9mm tall, wall thickness 2.1mm. Should scale well. Step/.f3d attached.

Patterned Wedding Rings

Jewelry

The Base and Star will print without support, any settings.The tree will need minor supports in a couple areas, recommend 0.1-0.15mm layer height to keep the detail alive. Use 2x10mm long raw filament pieces as alignment pins to super-glue the tree halfs together. The larger tree can get away with 0.2mm layers without issue.The Globe Mesh may be a little trickier, recommend 0.2mm layers with support, max cooling air, SLOW speed, and 0.5-ish mm Z-hop. A wider extrude may help as well, 0.6mm, even with a 0.4mm nozzle. The idea being that the wider extrude will slump or droop, counteracting the tendancy for overhangs to curl up.If you're looking for the .step/.f3d files, let me know, I'll dig them out.

Christmas Tree

Christmas

sid naique

Lilypot Vase - to be printed using ‘Spiral Vase’ mode.

Lilypot [Spiral Vase mode]

Vases

3Dimension Customs

Simple Large keychain display stand for vendors selling keychains printed on a CR-10s will not fit on BBL due to being 320mm tall.

Keychain Display Stand

Craft Fair

K2_Kevin

This Hex Tray offers thicker walls for a more rugged tray. 3x3 Gridfinity base plate.

Hex Bin Gridfinity 3x3

Gridfinity

braga3dprint

The "Skull" keycap is a bold and edgy design that is sure to add a touch of personality to any keyboard. This 3D printed keycap model features intricate details and a sleek design that captures the essence of the classic skull symbol. Check out the latest video on my channel featuring this 3D printed skull keycap, the ultimate upgrade for your keyboard! The file used in the video is keycap_skull_v6.stlAlthough my print of the keycap skull may appear lackluster due to my budget printer (90€) and cheap filament (10€/Kg), by slowing down the speed and using a Prusa printer, you are likely to achieve much better results.&nbsp;It is available in many different versions, so you can find the perfect fit.New RGB version (keycap_skull_v7_RGB):<figure class="image"><img src="https://media.printables.com/media/prints/394839/rich_content/e7d6fe2e-4f0c-4bd8-826c-67101ad96d42/thumbs/cover/800x1067/jpg/psx_20230212_171051.webp"></figure>Additionally, the keycap skull design is also available in a low poly option for those who prefer a more minimalistic look.To achieve the best results with your print, it is recommended to use a nozzle size of 0.4mm or smaller and set the layer height to the lowest possible, at 0.1mm or lower. For the highest level of detail, resin printing is the recommended method. Additionally, due to the complex nature of the design, it is important to use supports during the printing process.Consider showing your support by liking, downloading, and sharing this unique keycap design.&nbsp;&nbsp;A special thanks to:<ul><li>Thank you to <a target="_blank" href="https://www.thingiverse.com/rsheldiii" rel="nofollow noopener">rsheldiii</a> the designer of the <a target="_blank" href="https://www.thingiverse.com/thing:2783650" rel="nofollow noopener">parametric keycap model</a>.</li><li>Thank you to <a target="_blank" href="https://www.printables.com/social/262129-fragaile" rel="nofollow noopener">Fragaile</a> the designer of the <a target="_blank" href="https://www.printables.com/model/188979-flat-keycap-cherry-mx" rel="nofollow noopener">Flat keycap (Cherry MX)</a>.</li><li>Thank you to <a target="_blank" href="https://www.printables.com/social/533-bugman_140" rel="nofollow noopener">Bugman_140</a> the designer of the <a target="_blank" href="https://www.printables.com/model/5988-skull-scar" rel="nofollow noopener">SKULL - SCAR</a>.</li><li>Thank you to <a target="_blank" href="https://www.thingiverse.com/slavikk" rel="nofollow noopener">slavikk</a> the designer of the <a target="_blank" href="https://www.thingiverse.com/thing:906562" rel="nofollow noopener">Low Poly Skull</a>.</li><li>Thank you to <a target="_blank" href="https://www.printables.com/social/13168-peter-from-belgium" rel="nofollow noopener">Peter from Belgium</a> the designer of the <a target="_blank" href="https://www.printables.com/model/2770-human-skull-anatomically-correct" rel="nofollow noopener">Human skull, anatomically correct</a>.</li><li>Thank you to <a target="_blank" href="https://www.thingiverse.com/LegendaryWolf43" rel="nofollow noopener">LegendaryWolf43</a> the designer of the <a target="_blank" href="https://www.thingiverse.com/thing:4856861" rel="nofollow noopener">Outemu / Cherry MX</a>.</li></ul>Without these talented creators, this remix would not have been possible. Shoutout to these awesome creators for their contribution to the 3D printing community!

Skull Keycaps

Keycaps

JonnayLin

When you want to use a Fine Point or Ultra Fine Point Sharpie with your Cricut instead of the proprietary pens.

Cricut Sharpie Adapter

Cricut

The Crafty Maker

Update 08-11-2023: Added additional boxes with varying slot counts from 2 up to 10.&nbsp;5 or 10 slot shadow box to display the shadow box sets.&nbsp;For a nice smooth front finish this box is best printed flat with front on build plate using regular supports. Increase support top Z distance to 2.2 or even 2.4 for easy support removal.&nbsp;You can also print it standing upright using tree supports. This will reduce the supports needed but could create some less nicely looking bridges at the top.&nbsp;ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you&#39;ll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Shadow Box

Frames

clockspring3d

I love small-scale craft tools! This Mini Craft Corner Clamp provides a means to hold objects square and stable while being glued together. Just in case the objects being clamped need more than just the bolts to hold them, two sets of supporting plates are also included. The sets differ in whether the plates are in contact with the junction point or not. It may be the case that adhesive on the join needs to be kept separate from the plates, so choose accordingly!

Mini Craft Corner Clamp

Functional

spary3d

A perfect sampler for your filament colours, printed at 0.3 mm layer height on a 300x300 bed

Filament Sample Color Swatch

Swatches

ralf.hoerhager

<h4>General Information</h4>I wanted an easy to print and nice looking frame for some Lithophane's I have. Furthermore, it should use cheap lights with batteries. I couldn't find something I liked so I drew my own in Fusion360.&nbsp;<h4>Parts and Tool</h4>The Lights I used <a target="_blank" href="https://www.amazon.de/Lichterkette-Silberdraht-Weihnachten-Halloween-Beleuchtung/dp/B07CRJT4LG?ref_=ast_sto_dp&th=1" rel="nofollow noopener">BXROIU 2 x 20er Micro LED</a>I used the <a target="_blank" href="https://lithophanemaker.com/Framed%20Lithophane.html" rel="nofollow noopener">Flat Lithophane Maker</a> to create the Lithophane.Filament <a target="_blank" href="https://www.amazon.de/SUNLU-Filament-Printer-Tolerance-Accuracy/dp/B07XFL3XB9/ref=sr_1_7?keywords=sunlu%2Bwhite&qid=1669161240&sr=8-7&th=1" rel="nofollow noopener">Sunlu PLA+ white</a> and <a target="_blank" href="https://www.amazon.de/SUNLU-Filament-Printer-Tolerance-Accuracy/dp/B07TJXL2T8/ref=sr_1_7?keywords=sunlu%2Bwhite&qid=1669161240&sr=8-7&th=1" rel="nofollow noopener">Sunlu Wood</a>&nbsp;<h4>The settings I used</h4><figure class="table" style="width:714px;"><table style="border:1px double var(--input-border);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Lithophane Resolution (mm/pixel)</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">0,2</td></tr><tr><td style="border:2px solid rgb(232, 64, 64);padding:0.4em;vertical-align:top;">Width (mm)</td><td style="border:2px solid rgb(232, 64, 64);padding:0.4em;vertical-align:top;">170</td></tr><tr><td style="border:2px solid rgb(232, 64, 64);padding:0.4em;vertical-align:top;">Height (mm)</td><td style="border:2px solid rgb(232, 64, 64);padding:0.4em;vertical-align:top;">120</td></tr><tr><td style="border:2px solid rgb(232, 64, 64);padding:0.4em;vertical-align:top;">Depth (mm)</td><td style="border:2px solid rgb(232, 64, 64);padding:0.4em;vertical-align:top;">6</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Base Height (mm)</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">3</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Overhang Angle (deg)</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">60</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Maximum Thickness (mm)</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">2,4</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Minimum Thickness (mm)</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">0,6</td></tr></tbody></table></figure>The Width, Height and Depth are important. You need to use the same values as above or change the frame model. The other settings depend on the printer you are using. I used a modified Artillery Sidewinder X1 to print this model. &nbsp;<h4>My print settings</h4>Lithophane:<ul><li>0,4mm Nozzle </li><li>0,2mm layer Hight</li><li>4 perimeter</li><li>100% infill</li></ul>Frame:<ul><li>0,6mm Nozzle </li><li>0,3mm layer Hight</li><li>3 perimeter</li><li>30% infill</li></ul>&nbsp;<h4>Assembly </h4>It's very simple: <ol><li>Thread the fairy lights through the hole on the back.</li><li>Bend the fairy lights so that they are nicely wrapped in the groove. Fix with hot glue if necessary.</li><li>Simply place the Lithophane in the slot provided.</li></ol>If you have any questions don't hesitate to ask me in the comments.

Lithophane frame

Lithophane

DonMatis

Filament painting showing the joy of listening to music while being dead :DEnjoy this new model and looking forward to see your printsPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA Overture Black</li><li>PLA PolyTerra Charcoal Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray</li><li>PLA+ Esun Bone White</li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #7 (0.64mm) swap to Charcoal Black</li><li>At layer #9 (0.8mm) swap to Cement Gray</li><li>At layer #11 (0.96mm) swap to Gray</li><li>At layer #13 (1.12mm) swap to Light Gray</li><li>At layer #18 (1.52mm) swap to Bone White</li><li>At layer #26 (2.16mm) swap to White for the rest.</li></ul>

Listening Music in the frame

Hueforge

Sevro

OverviewA shell-shaped pot on a bonsai tree. I was inspired by this photo and decided to make some similar ones.<figure class="image image_resized" style="width:214.406px;"><img src="https://media.printables.com/media/prints/550656/rich_content/7fb09307-eef0-40af-9b48-1e5503550fbe/shell.jpg"></figure>&nbsp;InstructionYou have two option to print this model.<ol><li>You can print separately tree and shell. This method allow you to color each part as you want. However you have to use support to print shell. After print put shell into tree. You can also glue it but it is not necessary.</li><li>You can print whole model at once (I didn't test it yet)</li></ol>Have fun

Shell-shaped pot on a bonsai tree

gifts

GuyH77

NOTICE: I have learnt a lot from this design. As a result I have created a new base ramp which is now released. This design is still valid and I will continue to maintain it. It serves it&#39;s purpose of the original designed goal. I designed this scoop to aid removal of larger debris that could interfere with the bed movement. My new design is an attempt to try and improve on the removal of very small bits of plastic. That is one criticism of this design. &nbsp;Alternative Design: Only tested by me so far: <a target="_blank" href="https://makerworld.com/en/models/507985#profileId-423740" rel="nofollow noopener">https://makerworld.com/en/models/507985#profileId-423740</a>&nbsp; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -&nbsp;A simple two part print that forms a ramp at the front of your Bambu Lab printer making it easier to scoop out any stray bits of plastic.&nbsp;I printed standing up with a brim. The reason for this orientation is to get a nice smooth wall and strong clips. Split the stl to objects.&nbsp;The two halves should slide together with a snug fit. The clips help locate the scoop in the base of your printer.