jelle.beusen

Etsy

p666buc

<h3>Rugged GoPro box with space for Pass-through door, 1 battery, plus 2 SD cards</h3>AssemblyYou will need six M3x20 (4 SD cards) or M3x25 (2SD cards) screws to assemble it, and a piece of (soft) foam (9-10 mm thickness) to put into the lid.&nbsp;If you have some spare time please check out my other rugged boxes.If you have any ideas for a rugged box please let me know in the comments.&nbsp;

GoPro Rugged Box (With Logo)

Rugged

Clayton Merkle

UPDATE 5/7/2023:I added a new limit switch bracket called “X limit switch bracket-MOD-SPRITE.” This design moves the limit switch over to the left 6.5mm so that the sprite extruder nozzle homes 1mm to the left of the bed. With the stock limit switch bracket and the sprite extruder, the nozzle homes 5.5m to the right of the left edge of the bed, reducing the X axis print volume.&nbsp;UPDATE 3/12/2023:I added a new modified “X_gantry_cam_mount” design, which moves the camera down 10mm, to the left 10mm, and also tilts it downward at a 15 degree angle. I find that this significantly improves the view of the camera. The new design is called “X_gantry_cam_mount_v2”&nbsp;A mount for the Logitech C920 webcam to be mounted to the gantry so it raises and lowers with the print head. The “X limit switch bracket” replaces the original X axis limit switch bracket and add two holes with heat set inserts for the camera mount to attach. The actual camera adapter was taken from maxdeangelis's design from Thingiverse: <a href="https://www.thingiverse.com/thing:4138414" rel="nofollow">Logitech Camera Mount Ender 3 by maxdeangelis - Thingiverse</a>The camera does need to be disassembled to install this adapter and remove the original base.I have included 3 variations of the x axis limit switch cover:<ol><li>Standard</li><li>With cable rail, for zip-tying cables to</li><li>With cable chain mounting points</li></ol>Hardware required:<ol><li>2x M3 H6 heat set inserts</li><li>2x M3x6 or M3x8 screws (for screwing into heat set inserts)</li><li>1x M3x12 screw for attaching camera to camera mount arm</li></ol>The cable chain mounts were reverse engineered from this model: <a href="https://www.thingiverse.com/thing:4563903" rel="nofollow">Ender 3 x Micro Swiss Direct Drive Cable Chain Gantry Mounts by SnowmanTechie - Thingiverse</a>&nbsp;

Ender 3 Logitech C920 Gantry Mount

Various

Unique 3D

Full TPU KIT for hammer 5 fpv Drone by MY Frame

Drone FPV Hammer 5" TPU KIT

Drone builds

pixelwave

I tried many different approaches from building my own (expensive) filament box with aluminum extrusions and sealed acrylic glass to single Rubbermaid boxes with humidity sensor and Silca gel.This is now the one I settled for and I am quite happy with the cost / performance. It is a modular approach to creating an affordable DryBox that fits four 1kg Prusament Spools but also larger (2+kg) or slimmer (samples, etc…) ones.I tried to print as many parts as possible to reduce part sourcing. Minimum Configuration:1× IKEA Samla 22L Box with Lid2× 8mm Threaded Rods (320mm each)16× 608ZZ Bearings (ABEC7 or above)4× E3D Threaded Bowden or PC4-M10 Coupling 4x PTFE Transparent Tube (4/3mm OD/ID) You could save on the bearings and just print the circular spool holders but I wanted to have that added smooth rotation. For the filament exits I still had a lot of E3D PTFE Couplings laying around from my previous attempts with the Rubbermaids. But I figured standart and cheaper PC4-M10 couplings also work. For the future I want to design a printable solution that works without purchasing parts but for now that works great. I also added an AQARA Humidity & Temperature Sensor (Zigbee) with custom slide-in mount. I have this integrated in my home assistant dashboard alongside with Octoprint via MQTT. I find this solution better now then the simpler circular humidity sensors you can also find on various dryboxes. I noticed it seems to be also much more precise.Printing should be very straight forward. I used Signal White PETG Prusament with mostly the standard print settings. For the Threaded Couplings I would advise 0.1mm resolution or recut afterwards with an BSP G 1/8-28 or M10 thread cutter. If you would like to have additional airtight sealing use rubber seals on the lid and print the additional pressure fit clips to hold the lid tight. 4 clips should be sufficient.Silca Gel can be added on fine-meshed bags on the bottom of the box to further reduce humidty. I picked up some from amazon (33 x 25 cm) which fit perfectly.All .3mf Files have a suffix (_xNUMBER) to show how many of them need to be printed.Next Updates:+ Design custom clips for the end of the PTFE Tubes when the filaments exists to add the final air seal + Release Fusion360 Source Files for customizations (after cleanup ;)&nbsp;UPDATE V2.5 - 11.04.2023All rollers have been increased in width to allow for a more flexible spool placement.<ul><li>Bearing Housing - L_16x.3mf > increased width</li><li>Bearing Housing - R_16x.3mf > increased width</li><li>Spacer_6x.3mf > increased width to 8mm</li><li>End Caps_x4.3mf > adjusted spaceing</li></ul>&nbsp;UPDATE V2.1 - 09.02.2023<ul><li>PTFE - Nut_4x.3mf > fixed faulty thread</li></ul>&nbsp;UPDATE V2 - 14.09.2022I changed the behaviour now so the bearings are screwed in place using thumbscrews. That way they can not wobble anymore and misalign. The endcaps (slighty changed dimensions) and PTFE screws (only cosmetically) are in the same design as well. I also added nameplates to identify easier the filament via a 12mm label (PLA, PTFE, etc …). The nameplates require a 10x1.5mm magnet.Updated Print Files:<ul><li>Thumbscrew - 16x</li><li>End Cap - 4x</li><li>Spacer - 6x</li><li>PTFE - Screw - 4x</li><li>PTFE - Nut - 4x</li><li>Nameplate Front - 4x</li><li>Nameplate Rear - 4x</li></ul>&nbsp;UPDATE - 19.08.2022Updated Print Files:<ul><li>Thumbscrew - 16x → changed thread offset for better fit</li><li>End Cap - 4x → changed thread offset for better fit</li></ul>&nbsp;_______If you like my uploads buy me a coffee -> <a href="https://bit.ly/pwave-donate" rel="nofollow">https://bit.ly/pwave-donate</a>

Filament Dry Box 4x (IKEA Samla 22L)

3D Printing extras

memory_null

This is a recreation of Jonatan's(which is a remix of Whity's) Ikea handle remix in Fusion360. Included is the F3D parametric file as well as 3mf and step for those using other programs.

Ikea Alex Handle

Furniture

Fizzy Chickens

Remix of <a target="_blank" href="https://www.thingiverse.com/thing:3715002" rel="nofollow noopener">Diogosantos88's Drag Chain - Cable Chain - Ender 3</a> (Thingiverse)&nbsp;Join our <a target="_blank" href="https://discord.gg/8PB2CHzkfk" rel="nofollow noopener">Discord Here</a>&nbsp;Update 12/11/23 Went through and fixed the bad faces in the models, so Prusa Slicer and Bambu Slicer shouldn't hit you with an error.&nbsp;Update 23/12/22 Added Remix of <a target="_blank" href="https://www.printables.com/model/324641-adjusted-extruder-mount-for-ender-3-s1-cable-chain" rel="nofollow noopener">PerryOnCrack's Remix</a> of my OG Extruder Mount - Now has V-Slot Cover&nbsp;Highly Recommend checking out <a target="_blank" href="https://www.printables.com/social/383971-visthum/models" rel="nofollow noopener">Visthum's Remix</a> of the chain, going behind the printer with curves.&nbsp;To attach the Under Printer Clip gently pinch the two arrows together underneath the printer.Suggested Slicer Settings:<ul><li>Layer Height: 0.16-0.20</li><li>Infill: 100%</li></ul>&nbsp;For Ender 3 v2 users, please see <a target="_blank" href="https://www.printables.com/model/363299-gantry-mount-for-cable-chain-ender-3-v2-sprite-ext" rel="nofollow noopener">Turricanus' Remix</a> of the Cable Chain. The photos showing off the cable pay homage to the first people who printed it. I thank you.

Ender 3 S1 Cable Chain

Ender projects

Kardes.Design

Update: <a target="_blank" href="https://makerworld.com/en/models/84473#profileId-90295" rel="nofollow noopener">CMYK lithophanes released</a>!Introducing the Arctic Glow Christmas Lantern, here to transform your holiday decor! Simply switch out the decorative panels to create a whole new look for your lantern. And with new designs added regularly, you&#39;ll never get tired of the same old holiday decor.&nbsp;The <a target="_blank" href="https://makerworld.com/en/models/31480#profileId-33790" rel="nofollow noopener">panel template</a> is available for the community to remix as they wish.&nbsp;<ul><li>Effortless Printing: No support material needed for printing, making it a hassle-free experience.</li><li>Works seamlessly with <a target="_blank" href="https://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab&#39;s LED lamp kit</a> and a generic LED strip.</li><li>Assembly Made Easy: Snap together with ease - no glue or extra hardware required.</li><li>Everything is printable on all Bambu lab printers including the A1 mini</li><li>Fully compatible with my <a target="_blank" href="https://makerworld.com/en/u/2706903410/collections/57878" rel="nofollow noopener">mystic lamp panels collection</a>. Panel templates are available to remix</li><li>Lids are compatible with my other <a target="_blank" href="https://makerworld.com/en/models/58185#profileId-59926" rel="nofollow noopener">Christmas lamp</a> and other future designs will also be compatible.</li></ul>Print instructions:colored 3MF Files with perfect print settings are available for all models!Main structure:Designed to be 100% support free.Layer height: 0.2Infill: 10%Bottom/top layers: 4Walls: 2 walls for the base and 4 walls for the top&nbsp;Panels:&nbsp;Print directly with from the print profile and easily change colors. I separated each color change to a separate object.You can choose green for example instead of Blue by just changing the second layer object.<figure class="table" style="width: 622.263px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-17_3e064ce3d26e1.png"></figure></td></tr></tbody></table></figure>&nbsp;or&nbsp;Use the Non AMS 3MF files with pre programmed pauses for color changes. This method works without the AMS.&nbsp;Colors used:Lamp:<a target="_blank" href="https://shrsl.com/4k35u" rel="nofollow noopener">Alpine Green Sparkle</a><a target="_blank" href="https://shrsl.com/4k36k" rel="nofollow noopener">Crimson Red Sparkle</a><a target="_blank" href="https://shrsl.com/4k36a" rel="nofollow noopener">Matte Ivory White</a><a target="_blank" href="http://shrsl.com/4k3a5" rel="nofollow noopener">Matte Blue Ice</a><a target="_blank" href="http://shrsl.com/4k3a6" rel="nofollow noopener">Gold silk</a>Panels:<a target="_blank" href="https://shrsl.com/4k36a" rel="nofollow noopener">Matte Ivory White</a><a target="_blank" href="http://shrsl.com/4k3a5" rel="nofollow noopener">Matte Blue Ice</a><a target="_blank" href="https://shrsl.com/4k35q" rel="nofollow noopener">Matte charcoal</a><a target="_blank" href="https://shrsl.com/4k35u" rel="nofollow noopener">Alpine Green Sparkle</a>&nbsp;Lithophanes:&nbsp;Please download the 3MF file or use the print profile.You can also make your own lithophanes with this amazing website <a target="_blank" href="https://lithophanemaker.com/Framed%20Lithophane.html#processing" rel="nofollow noopener">lithophanemaker.com</a>Simply fill in these values after uploading your image and you will get a panel that fits perfectly in the lamp.<figure class="table" style="width: 461.468px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-06_8f2f6ecf71ac2.png"></td></tr></tbody></table></figure>&nbsp;&nbsp;Lighting:&nbsp;All pictures were taken with the <a target="_blank" href="https://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab Led lamp kit 001</a> used. It is perfect for the lamp and provides more than enough lighting.&nbsp;Print the LED channel if you don&#39;t have the Bambu lab LED kit.&nbsp;The channel can fit around a 2 meters. you do not need to cut the strip if its longer. instructions below.&nbsp;<figure class="table" style="width: 278.968px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><a target="_blank" href="https://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab LED lamp kit</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-17_de10ecf9a5ffa.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-17_740b37c2a6e7b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-17_ebd645943cbff.jpg"></figure>&nbsp;</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Generic LED strip( 2meters)</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-10-24_572427393436.gif"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Commercial use license: <a target="_blank" href="https://www.patreon.com/user?u=103482126" rel="nofollow noopener">Patreon</a>&nbsp;Hi, I&#39;m a student and love creating functional and beautiful designs optimized for 3D printing.if you like my work consider supporting me with these options:<ul><li><a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86" rel="nofollow noopener">Paypal</a></li><li><a target="_blank" href="https://www.buymeacoffee.com/KardesDesign" rel="nofollow noopener">Buymeacoffee</a></li></ul>&nbsp;

Arctic Glow Christmas Lantern LED lamp kit 001

Christmas

brody.bolanos

Bambu Lab P1P Printable Cable Drag ChainI created a printable cable chain for the p1p as not everyone has access to the cable chain from Amazon that I linked in my other design <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> . There were a few things that I wanted to meet or exceed from the store bought design including a reduction in sagging and lighter weight. <ul><li>Chain has a minimum bending radius of 18mm, making sure the wire doesn't get over bent.</li><li>When fully extended ( side with the latches face down) the chain has a slight curve, meaning it wont lay completely flat. This is intentional to make sure the chain wont accidently bend the opposite way.</li><li>Each of my links weigh 1.963g and the cable chain links from amazon weigh 2.160g. </li><li>Below you can see the difference in sagging with the chains fully extended.</li></ul>Please use <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> for the rest of the instructions and print files for the complete assembly. &nbsp;This is a 3d printed chain with a lot of moving parts, overtime tolerances will loosen and it will start to wear down. I haven't had any issues so far but the Amazon chain is still a better option overall when it comes to durability and smoothness. <figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_j3urpsw5m7fl.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_0djvy4hh02bh.jpg"></figure><blockquote><h3>Files</h3></blockquote>Main Files<ol><li>Chain Link Latch</li><li>Chain Link Latch PTFE Clip</li><li>Chain Link 0.0</li></ol>Alternative Files<ol><li>Chain Link -0.02</li><li>Chain Link +0.02</li></ol>Print Files<ol><li>Printable Cable Drag Chain Assembly</li><li>Printable Cable Drag Chain Test Print</li></ol><blockquote><h3>Parts/BOM</h3></blockquote><ul><li>22 Chain Link Latch</li><li>22 Chain Link 0.0</li><li>1-3 Chain Link Latch PTFE Clip ( I used one on the 11th link)</li></ul><blockquote><h3>Print Orientation</h3></blockquote><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_dwzfge3tu4g9.png"></figure><ul><li>The PLA/+ printing preset for cooling uses the Aux fan, I don't know how much it effects the print as the fan blows from one side but I kept all the male sides of the links facing towards the fan. </li></ul><blockquote><h3>Print Setting</h3></blockquote>Filament Tested - eSun PLA+, Bambu Tough, Polylite PLA Pro (dried and kept around 20%RH). DO NOT USE PLA, IT WILL BREAK<ul><li>See print file</li></ul>Supports<ul><li>None</li></ul><blockquote><h3>Before You Print</h3></blockquote>In the Files section you might have seen two alternatives Chain Link Files.<ol><li>Chain Link Final -0.02</li><li>Chain Link Final +0.02</li></ol>These alternative files change the hole sizing slightly in the cable links. 0.0 worked perfectly when using PLA + but when I switched over to PETG I had to tighten the tolerances, making the hole smaller, hence the +0.02 file. Alternatively, -0.02 will expand the hole . More under “Assembly” below.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_2n9xykfuj8sc.png"></figure><blockquote><h3>PETG Note</h3></blockquote><ul><li>It seems like a hit or miss with PETG, as a small percentage of users couldn't get good prints ( including me). If you are having issues with the tolerances being too lose please comment or message me and I will send you + 0.03/0.04 files. </li></ul><blockquote><h3>Assembly</h3></blockquote><ul><li>Print Printable Cable Drag Chain Test Print</li><li>Once you've printed the test file, press the matching links into place, in total 3 small chains consisting of (0,0,0) (+.02,+.02,+.02) (-.02,-.02,-.02) . It's kind of hard but a little easier if you slide the links together along the chamfer on each cylinder. </li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_g6fawy05urym.png"></figure><ul><li>Next snap the latches into place</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_11ru8ghqjsnh.png"></figure><ul><li>What you're looking for initially is a snug fit, after rotating the pieces back and forth a handful of times they'll loosen up and you should be able to figure out which sizing is correct. There should be very little movement (almost none) when wiggling the links in any other direction other then rotating. If you have PLA + I would suggest doing the test print in that ( pla should work fine for this but the pieces will definitely break ) reasoning being I know PLA + gives a good fit and even you you want to print in something else, it'll help you get a good idea of how it should feel. </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_a9kvyeohlog5.jpg"></figure><ul><li>Once you've figured this out, use the file Printable Cable Drag Chain Assembly ( which is sized at 0.0) to print out 22 links, 22 latches, and 1 PTFE latch ( or more ). Or use another sizing!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_qxbgr6led8o5.png"></figure><h3> </h3><h3>Make sure to recalibrate after the chain is installed. </h3>&nbsp;<blockquote><h3>Tips</h3></blockquote><ul><li>I only used 21 latches including the PTFE latch, I forwent the first latch on the link (the side closest to the frame) </li><li>To remove the latches, insert a small flat head screwdriver and twist. </li></ul><h4>Be careful where you place the PTFE clips, one in the middle is enough. Additional locations can cause the PTFE tube to put unwanted force on the chain.</h4>&nbsp;<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/244611/2023-09-27_jdfxwg6vkfon.jpg"></figure><h3>Please use <a target="_blank" href="https://makerworld.com/en/models/23653" rel="nofollow noopener">https://makerworld.com/en/models/23653</a> for the rest of the instructions and print files for the complete assembly. </h3>&nbsp;If you like my designs and want to say thanks, you can buy me a coffee and help fund the filaments I need for prototyping. A donation of any amount to <a target="_blank" href="https://www.buymeacoffee.com/brodyB" rel="nofollow noopener">Buy Me a Coffee</a> or <a target="_blank" href="https://paypal.me/brodyb10?country.x=US&locale.x=en_US" rel="nofollow noopener">PayPal</a> would be greatly appreciated!&nbsp;<h3>As always, given different printing environments, filaments, etc., prints may not work perfectly for everyone. If you are having issues please message or comment and I will try my best to resolve the issue.</h3>